Flowmaster exhaust, headers, cowl hood, stock hood
#1
Junior Member
Thread Starter
Join Date: Aug 2014
Location: Mn
Posts: 64
Received 0 Likes
on
0 Posts
Car: 91' camaro rs
Engine: Sbc 327
Transmission: T-5
Axle/Gears: Stock 10 bolt w/posi 3.90 gears
Flowmaster exhaust, headers, cowl hood, stock hood
For sale is a full exhaust system off my 91 rs that had the 305 single cat. It's the flowmaster 3" American thunder. 1 5/8" shorty headman headers with the headman y pipe. I had it set up with no cat. Couple small dents on side muffler, not a big deal at all. $300 pickup only.
I also have a 4" cowl hood fiberglass, I think it's a harwood. I decided to go with a steel 2" cowl hood. It has 4 pin holes 1 in each corner. It is a bolt on hood. It needs the gel coat fixed at the bottom of the hood. $250 pickup only.
Stock rs hood no hinges or latch. Good shape. $80 pickup only.
I also have a 4" cowl hood fiberglass, I think it's a harwood. I decided to go with a steel 2" cowl hood. It has 4 pin holes 1 in each corner. It is a bolt on hood. It needs the gel coat fixed at the bottom of the hood. $250 pickup only.
Stock rs hood no hinges or latch. Good shape. $80 pickup only.
#3
Junior Member
Thread Starter
Join Date: Aug 2014
Location: Mn
Posts: 64
Received 0 Likes
on
0 Posts
Car: 91' camaro rs
Engine: Sbc 327
Transmission: T-5
Axle/Gears: Stock 10 bolt w/posi 3.90 gears
Re: Flowmaster exhaust, headers, cowl hood, stock hood
Hi, I'm up on the iron range by Nashwauk.
#4
Junior Member
Thread Starter
Join Date: Aug 2014
Location: Mn
Posts: 64
Received 0 Likes
on
0 Posts
Car: 91' camaro rs
Engine: Sbc 327
Transmission: T-5
Axle/Gears: Stock 10 bolt w/posi 3.90 gears
Re: Flowmaster exhaust, headers, cowl hood, stock hood
I'd also consider trading for suspension upgrades such as lowering springs, koni yellows, Kyb agx, adjustable panhard bar, tubular control arms, relocate control arm bracket, subframe connectors, ls style t56, tko 600, steel sfi bell, brembo brakes, pro 5.0 shifter, long tube 1 3/4 headers, basically anything that improves the car I'd be interested in.
#7
Junior Member
iTrader: (1)
Join Date: May 2016
Location: south dakota
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Irocz
Engine: 350 sbc
Transmission: T5
Axle/Gears: 3.42s i think??? never checked
Re: Flowmaster exhaust, headers, cowl hood, stock hood
I have some used lca's if youre interested. One end is poly. The other end is heim joint. The heim joints either need some lubrication or replacing because they are a little stiff
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Aug 2014
Location: Mn
Posts: 64
Received 0 Likes
on
0 Posts
Car: 91' camaro rs
Engine: Sbc 327
Transmission: T-5
Axle/Gears: Stock 10 bolt w/posi 3.90 gears
Re: Flowmaster exhaust, headers, cowl hood, stock hood
Are you looking to trade or sell? What brand are they and are the poly bushings in good shape? Thanks.
#9
Junior Member
iTrader: (1)
Join Date: May 2016
Location: south dakota
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Irocz
Engine: 350 sbc
Transmission: T5
Axle/Gears: 3.42s i think??? never checked
Re: Flowmaster exhaust, headers, cowl hood, stock hood
Poly bushings are great. Just the heim joints are a little stiff. Honestly im not sure of the brand. They look almost identical to the founders performance ones i have. Id potentially be interested in the hood but would be fine just selling these too
#10
Junior Member
Thread Starter
Join Date: Aug 2014
Location: Mn
Posts: 64
Received 0 Likes
on
0 Posts
Car: 91' camaro rs
Engine: Sbc 327
Transmission: T-5
Axle/Gears: Stock 10 bolt w/posi 3.90 gears
Re: Flowmaster exhaust, headers, cowl hood, stock hood
Ok. Where are you located and how much were you wanting for them? Thanks
#11
Junior Member
iTrader: (1)
Join Date: May 2016
Location: south dakota
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Irocz
Engine: 350 sbc
Transmission: T5
Axle/Gears: 3.42s i think??? never checked
Re: Flowmaster exhaust, headers, cowl hood, stock hood
Located in aberdeen, sd
id take 50 shipped
id take 50 shipped
#12
Junior Member
Thread Starter
Join Date: Aug 2014
Location: Mn
Posts: 64
Received 0 Likes
on
0 Posts
Car: 91' camaro rs
Engine: Sbc 327
Transmission: T-5
Axle/Gears: Stock 10 bolt w/posi 3.90 gears
Re: Flowmaster exhaust, headers, cowl hood, stock hood
Ok that sounds like a fair price. Where do you find new joints?
#13
Junior Member
iTrader: (1)
Join Date: May 2016
Location: south dakota
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Irocz
Engine: 350 sbc
Transmission: T5
Axle/Gears: 3.42s i think??? never checked
Re: Flowmaster exhaust, headers, cowl hood, stock hood
Just call direct into founders 805-541-2254
theyll be able to get you some new ones. I had to get new bushings for mine. Fast and friendly.
Pm for paypal if you want to buy. I can get them sent out tomorrow
theyll be able to get you some new ones. I had to get new bushings for mine. Fast and friendly.
Pm for paypal if you want to buy. I can get them sent out tomorrow
#14
Junior Member
Thread Starter
Join Date: Aug 2014
Location: Mn
Posts: 64
Received 0 Likes
on
0 Posts
Car: 91' camaro rs
Engine: Sbc 327
Transmission: T-5
Axle/Gears: Stock 10 bolt w/posi 3.90 gears
Re: Flowmaster exhaust, headers, cowl hood, stock hood
let me know if you're interested in the hood I'll hold it for ya.
#15
Junior Member
Thread Starter
Join Date: Aug 2014
Location: Mn
Posts: 64
Received 0 Likes
on
0 Posts
Car: 91' camaro rs
Engine: Sbc 327
Transmission: T-5
Axle/Gears: Stock 10 bolt w/posi 3.90 gears
Re: Flowmaster exhaust, headers, cowl hood, stock hood
Still available
#16
Junior Member
Thread Starter
Join Date: Aug 2014
Location: Mn
Posts: 64
Received 0 Likes
on
0 Posts
Car: 91' camaro rs
Engine: Sbc 327
Transmission: T-5
Axle/Gears: Stock 10 bolt w/posi 3.90 gears
Re: Flowmaster exhaust, headers, cowl hood, stock hood
I think I'll just make these work in my new setup since nobody has interest. Not available!