91 Camaro Intellitronix Gauges
#1
Junior Member
Thread Starter
Join Date: Jul 2017
Location: Western New York
Posts: 58
Likes: 0
Received 15 Likes
on
10 Posts
Car: 91 Z28
Engine: 305 TPI
Transmission: 5 Speed
Axle/Gears: G92 (3.42)
91 Camaro Intellitronix Gauges
Hi everyone,
After having my original gauge cluster burn and having trouble receiving my gauge cluster I ordered I really liked this digital cluster. Now I looked around on the forums and found some posts that were helpful but I think info is still lacking for the 91-92 clusters. I will try to add some helpful insight on my install but I was wondering if anyone could shed some light if they’ve attempted this themselves? Thanks for the help!
After having my original gauge cluster burn and having trouble receiving my gauge cluster I ordered I really liked this digital cluster. Now I looked around on the forums and found some posts that were helpful but I think info is still lacking for the 91-92 clusters. I will try to add some helpful insight on my install but I was wondering if anyone could shed some light if they’ve attempted this themselves? Thanks for the help!
#3
Junior Member
Thread Starter
Join Date: Jul 2017
Location: Western New York
Posts: 58
Likes: 0
Received 15 Likes
on
10 Posts
Car: 91 Z28
Engine: 305 TPI
Transmission: 5 Speed
Axle/Gears: G92 (3.42)
Re: 91 Camaro Intellitronix Gauges
I was trying to figure out how to wire the speedometer since there isn’t a cable in these cars so do you use the speed converter they send with the gauges?
#4
Re: 91 Camaro Intellitronix Gauges
On the original cluster #1 is the vss signal from the ecm. If your instructions are vague give the company a call for tech support.
http://docs.wixstatic.com/ugd/6a4159...c4c1a34aa4.pdf
http://docs.wixstatic.com/ugd/6a4159...c4c1a34aa4.pdf
Last edited by Tuned Performance; 10-04-2017 at 04:28 PM.