Equilibrium Camaro
#152
Supreme Member
Re: Equilibrium Camaro
Well, I'm literally emailing him photos right now. I suppose I can throw an extra or two up here and on my instagram, but would that steal his thunder? It's his car build thread, after all
Test:
Test:
Last edited by KMK454; 03-13-2017 at 03:33 PM.
#155
COTM Editor (Retired)
Re: Equilibrium Camaro
Dude, I think somebody nominated you for Car of the Month (COTM).
I think you have a cool car and a really interesting build, but would like to see more finished pictures of the whole car, the interior, the engine...
there are a lot of "under construction" photos in this thread, but only one or two "glory shots."
I think you have a cool car and a really interesting build, but would like to see more finished pictures of the whole car, the interior, the engine...
there are a lot of "under construction" photos in this thread, but only one or two "glory shots."
#158
Senior Member
Thread Starter
Re: Equilibrium Camaro
It is?! Awesome lol what kind of shots do you think I need? I just did the smoking tire with Matt farah but the video isn't up tet
#159
COTM Editor (Retired)
Re: Equilibrium Camaro
Minimally, one can get by with about five (5) good pictures: Two or three exterior pics (different angles), plus one (1) interior pic, and one (1) pic of the engine. Looking at these latest photos you've posted, I would say that you've got the exterior covered (although we wouldn't be able to use any of the ones that are obviously 'doctored'. You need to be able to submit a good interior pic and an engine pic.
All aspects of the vehicle must be in a clean and completed state.
Feel free to PM me or respond here if you have any questions, concerns, or would like clarification.
All aspects of the vehicle must be in a clean and completed state.
Feel free to PM me or respond here if you have any questions, concerns, or would like clarification.
#160
Senior Member
Re: Equilibrium Camaro
I nominated your car for COTM. I love this thing. I'm planning to build a Camaro for the Newfoundland Targa so this thing is right up my alley... Except those rough roads would rip the aero stuff off the bottom of the car... I'll actually be installing a skid plate and keeping the car at stock height just so it survives.
#161
Senior Member
Thread Starter
Re: Equilibrium Camaro
Minimally, one can get by with about five (5) good pictures: Two or three exterior pics (different angles), plus one (1) interior pic, and one (1) pic of the engine. Looking at these latest photos you've posted, I would say that you've got the exterior covered (although we wouldn't be able to use any of the ones that are obviously 'doctored'. You need to be able to submit a good interior pic and an engine pic.
All aspects of the vehicle must be in a clean and completed state.
Feel free to PM me or respond here if you have any questions, concerns, or would like clarification.
All aspects of the vehicle must be in a clean and completed state.
Feel free to PM me or respond here if you have any questions, concerns, or would like clarification.
#162
Junior Member
Join Date: Dec 2015
Location: Vancouver BC
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 RS
Engine: 350
Transmission: T5
Axle/Gears: 3:73
Re: Equilibrium Camaro
wow!!! car turned out awesome
not sure if you posted about the fenders, i may have just missed the info on them there's so much to take in lol
what did you do to them, are they custom ? love the look
not sure if you posted about the fenders, i may have just missed the info on them there's so much to take in lol
what did you do to them, are they custom ? love the look
#163
Member
Join Date: May 2010
Location: Oakland, California
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Re: Equilibrium Camaro
I am also aiming to turn my 89 iroc into a mod car that people respect. It's going to be thrice as hard for me since I don't know anything about cars lol. Great job on your car and I hope you win COTM!!
#164
Senior Member
Thread Starter
Re: Equilibrium Camaro
The fenders are in the thread somewhere lol they are dance fenders.. from there original molds.. not the new smaller molds. The fenders are 2.5 inches on each side up front and the tears are 2 inch on each side. I squeezed as much out of them as I could. They are molded and bonded and body worked smith and seamless.
#165
Senior Member
Thread Starter
Re: Equilibrium Camaro
Thanks buddy. Never back down from a challenge. You learn every step of the way
#166
Senior Member
Thread Starter
Re: Equilibrium Camaro
The smoking tire review is up!! Check it out on you tube
#168
Senior Member
Thread Starter
#169
Re: Equilibrium Camaro
Wow that's awesome! I just saw that video of the smoking-tire YESTERDAY, and I bought a Camaro this morning only to come on here and think "I recognize that car??"
YEP you're famous
YEP you're famous
#170
Supreme Member
iTrader: (25)
Join Date: Sep 2005
Location: NJ
Posts: 1,845
Received 293 Likes
on
228 Posts
Car: 1987 IROC-Z
Engine: 406 on N20 w/ EFI
Transmission: P.B. 700R4
Axle/Gears: 12 bolt w/ 3.91
Re: Equilibrium Camaro
cool video
gotta get rid of that rear diffuser though. not a fan of that at all
gotta get rid of that rear diffuser though. not a fan of that at all
#171
Senior Member
Thread Starter
#172
Senior Member
Thread Starter
#173
Senior Member
Thread Starter
#174
Junior Member
Re: Equilibrium Camaro
Just read through your build and see it quite often on Instagram, absolutely loving the car man. amazing work building all that stuff too, might have to give ya a call when it comes that time for my car.
#175
Senior Member
Re: Equilibrium Camaro
So, if you do start a small production run of those front air dam/splitters, I definitely want one. If that doesn't happen, you HAVE TO do a video and show us how you did it. I like yours a lot but I would probably go a litter taller on the dam and not so wide on the splitter.
#176
Senior Member
Thread Starter
#177
Senior Member
Thread Starter
Re: Equilibrium Camaro
So, if you do start a small production run of those front air dam/splitters, I definitely want one. If that doesn't happen, you HAVE TO do a video and show us how you did it. I like yours a lot but I would probably go a litter taller on the dam and not so wide on the splitter.
#179
Senior Member
Thread Starter
#180
Senior Member
Thread Starter
#182
Senior Member
Thread Starter
Re: Equilibrium Camaro
I don’t think I’ll be getting the splitter into production, though I can build them to order??? Thank you guys
#184
Senior Member
Thread Starter
#185
Senior Member
Thread Starter
Re: Equilibrium Camaro
soooo i finally got some time to tinker on the camaro... andddd i must say i like where its headed.... still need to do my brembos though, can you gues what size tire is under the front end?
#189
Supreme Member
iTrader: (6)
Join Date: Aug 2011
Location: San Diego, California For Now
Posts: 2,379
Likes: 0
Received 10 Likes
on
10 Posts
Car: 88 Formula, 90 Iroc RIP, 92 RS Sold
Engine: 305 to 350
Transmission: 700r4
Axle/Gears: 10 Bolt
Re: Equilibrium Camaro
yea he is just DM him
he makes functional hood louvers as well
he makes functional hood louvers as well
#190
Senior Member
Thread Starter
Re: Equilibrium Camaro
yup absolutely! Shoot me an email! Sorry for the late response morrowmotorsports87@gmail.com
#191
Senior Member
Thread Starter
Re: Equilibrium Camaro
a little update since the last time I logged in...
got it on its wheels, it stops and turned like an absolute monster. Decided I need more downforce for I’ll be ditching the duck tail and going full wing .
it will be chassis mounted through the rear deck lid with seals and drains to seal out weather . The width of the wing is 72 inches with 6x12 end plates in carbon.
currently replacing the carpet, seats, repainting the cage section and shock resis.
installed a new headliner in alcantara, wrapped the a pillars to match as well
also installed the chippernut v3 siquential shift light and machined the gauge bezel make it fit inside of it.
while I was at it I converted the headlight switch to a 2016 mk6 jetta headlight switch with auto on feature.
the bezel will be apolstered in alcantara to match as well.
I will be doing the window switches to match as well.
got it on its wheels, it stops and turned like an absolute monster. Decided I need more downforce for I’ll be ditching the duck tail and going full wing .
it will be chassis mounted through the rear deck lid with seals and drains to seal out weather . The width of the wing is 72 inches with 6x12 end plates in carbon.
currently replacing the carpet, seats, repainting the cage section and shock resis.
installed a new headliner in alcantara, wrapped the a pillars to match as well
also installed the chippernut v3 siquential shift light and machined the gauge bezel make it fit inside of it.
while I was at it I converted the headlight switch to a 2016 mk6 jetta headlight switch with auto on feature.
the bezel will be apolstered in alcantara to match as well.
I will be doing the window switches to match as well.
#194
Senior Member
Thread Starter
#196
Senior Member
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
KMK454
Auto Detailing and Appearance
11
10-28-2023 12:54 AM