Windshield Wiper Arm Replacement?
#1
Windshield Wiper Arm Replacement?
Edit: For all future readers, this is fixed by tracing the tube down to the base and removing them by pulling firmly, separating the tubing without dissembling the whole grille portion.
I am trying to replace my windshield wiper arms. I managed to replace the arms, but I don't know how to replace the tubes connecting to the washer reservoir.
What do I do to fix this?
I am trying to replace my windshield wiper arms. I managed to replace the arms, but I don't know how to replace the tubes connecting to the washer reservoir.
What do I do to fix this?
Last edited by That Sky Guy; 01-21-2017 at 05:10 PM. Reason: Knowledge acquired!
#2
Supreme Member
Re: Windshield Wiper Arm Replacement?
Are you talking about the rubber tubes that transfer the fluid?
If so bring a small amount to an auto parts store and get a few feet in bulk. Should be cheap.
If so bring a small amount to an auto parts store and get a few feet in bulk. Should be cheap.
#3
Re: Windshield Wiper Arm Replacement?
I have new arms to install, and the tubing is attached to the old ones. I'm asking how I remove the grille/plate to get to where the tubing runs, under the arms.. unless there's a way to do it without removing the grille or plate.
#5
Member
Join Date: May 2010
Location: O'hare
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28
Engine: Enhanced 5.0L
Transmission: 700R4
Axle/Gears: 3:42 Posi
Re: Windshield Wiper Arm Replacement?
sorry,text came out so small...but red line shows the part you are referring to?...
#6
Member
Join Date: May 2010
Location: O'hare
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28
Engine: Enhanced 5.0L
Transmission: 700R4
Axle/Gears: 3:42 Posi
Re: Windshield Wiper Arm Replacement?
sorry text ended up so small..the red arrow points to part you are referring to?.....
#7