[VA] 1987 Iroc-Z Camaro
#1
Thread Starter
Junior Member
Joined: Apr 2016
Posts: 14
Likes: 0
From: Hampton Roads, VA
Car: 89 Camaro
Engine: 385
Transmission: '94 T-56
Axle/Gears: Broken 10 Bolt
1987 Iroc-Z Camaro
The car is a '87 IROC-Z Camaro and I have the title on me. I am located in Chesapeake, VA, but can ship most of the parts, but can't do anything to ship the car. Sorry, I didn't know exactly where to post this since the car can be parted out, but prefer to sell it as is. I picked up this car to use as a parts car for my project and being such has a few parts removed from it. Lets start with the good stuff, there doesn't seem to be any rust on the car, it has a very nice IROC hood with good looking louvers, it comes with two sets of doors one that have the handles shaved and one that is stock with good black arm rests, all the glass is in the car and in good shape. The interior was originally gray and some one spray painted it silver and did a pretty bad job so it is flaking off so you may be able to easily remove the flaking paint. The center console is in good shape, but will need a new lid. The car also appears to have had a non-AC heater box put in it, it retains the AC control panel. Comes with a set of stock front and rear seats if you want them. The car would make a great base for a race car since the interior isn't the best or it still could be revived to make a great street car because nothing on the body has been hacked on. I also have a bunch of other parts for the car that can be added for a bit more or sold separately. Asking $500 for the car, any reasonable offer will be considered as well or trades for T56 or 9" Housing. The car can be parted out as well.
Lower Control Arms and Spindle Assembly with Polyurethane Bushings- $40
set of 16X8 IROC Wheels - $100
set of 15X7 IROC Wheels - $300 Almost new looking, no curb rash or crazing
T-tops for different years and style pins - $40/per T-top PM for Pix
Complete and working Heater/AC unit from 89 camaro - $150
Toci D Spec Rear Shocks - $20
Head Units and adapter for Camaro console - $10
New front calipers for stock camaro brakes - $30
Aluminum Drum for the car, also fit other cars - $50
On Car adjustable panhard bar - $40
Hooker 2460 Shorty Headers non-Air - $100 NEW SOLD
Stock Starter - $15
IROC air box with bottom cut out - $100
Flow Master Muffler with 2.5" Pipes - $50
Stock Wonder Bar Steering Brace - $40
I have a bunch of other random parts for these cars. Ask for pictures of any of the above and feel free to make offers; I want it out of the garage!
Thanks
Lower Control Arms and Spindle Assembly with Polyurethane Bushings- $40
set of 16X8 IROC Wheels - $100
set of 15X7 IROC Wheels - $300 Almost new looking, no curb rash or crazing
T-tops for different years and style pins - $40/per T-top PM for Pix
Complete and working Heater/AC unit from 89 camaro - $150
Toci D Spec Rear Shocks - $20
Head Units and adapter for Camaro console - $10
New front calipers for stock camaro brakes - $30
Aluminum Drum for the car, also fit other cars - $50
On Car adjustable panhard bar - $40
Hooker 2460 Shorty Headers non-Air - $100 NEW SOLD
Stock Starter - $15
IROC air box with bottom cut out - $100
Flow Master Muffler with 2.5" Pipes - $50
Stock Wonder Bar Steering Brace - $40
I have a bunch of other random parts for these cars. Ask for pictures of any of the above and feel free to make offers; I want it out of the garage!
Thanks
Last edited by dahuntin; 08-23-2016 at 11:17 AM.
#4
Thread Starter
Junior Member
Joined: Apr 2016
Posts: 14
Likes: 0
From: Hampton Roads, VA
Car: 89 Camaro
Engine: 385
Transmission: '94 T-56
Axle/Gears: Broken 10 Bolt
Re: 1987 Iroc-Z Camaro
Those are the 15 x 7. Here are the 16 x 8's. They have some crazing in the clear, but aren't bad. The second wheel pictured has curb rash about 1/3 the way around, but could be smoothed and cleared to look pretty good.
#7
Thread Starter
Junior Member
Joined: Apr 2016
Posts: 14
Likes: 0
From: Hampton Roads, VA
Car: 89 Camaro
Engine: 385
Transmission: '94 T-56
Axle/Gears: Broken 10 Bolt
Re: 1987 Iroc-Z Camaro
Ask for anything, the car is being parted out and I'm willing to ship just about everything! Parts added and prices reduced!
Last edited by dahuntin; 08-22-2016 at 05:39 PM.
Trending Topics
#9
Thread Starter
Junior Member
Joined: Apr 2016
Posts: 14
Likes: 0
From: Hampton Roads, VA
Car: 89 Camaro
Engine: 385
Transmission: '94 T-56
Axle/Gears: Broken 10 Bolt
Re: 1987 Iroc-Z Camaro
This is actually from an '89 so I'm not sure if they are the same. It has the normal yellowing and some staining, but includes the cap, the plastic mounting bolts and the Delco washer pump that works "good enough". I was thinking $20 + shipping.
#10
Member
iTrader: (1)
Joined: May 2015
Posts: 341
Likes: 5
From: Eastern Canada NS
Car: 1987 IROC z
Engine: 350 TPI
Transmission: 700R
Axle/Gears: POSI 3:27s
Re: 1987 Iroc-Z Camaro
Ya that doesn't look too bad. Mine doesn't have that piece in the front for the line. I'll look at the car tomorrow and get back to you.
Thanks
Thanks
#17
Thread Starter
Junior Member
Joined: Apr 2016
Posts: 14
Likes: 0
From: Hampton Roads, VA
Car: 89 Camaro
Engine: 385
Transmission: '94 T-56
Axle/Gears: Broken 10 Bolt
Re: 1987 Iroc-Z Camaro
I think I have the gray ones from this car and also a set of dark red ones from a '89. Not sure of the condition. I'll locate and take some pics for you.
#18
Want a title? Post!
Joined: Aug 2016
Posts: 0
Likes: 0
From: Paris, MO
Car: 1988 Iroc Z
Engine: 305 TPI
Transmission: 700R4
Re: 1987 Iroc-Z Camaro
Looking for a good dash. Not the pad on top but the whole dash part with the vents. Mine cracked from where the center console meets up to it to where the center vents are.
#19
Thread Starter
Junior Member
Joined: Apr 2016
Posts: 14
Likes: 0
From: Hampton Roads, VA
Car: 89 Camaro
Engine: 385
Transmission: '94 T-56
Axle/Gears: Broken 10 Bolt
Re: 1987 Iroc-Z Camaro
Sorry Iniemeyer2, someone cut two holes for gauges under the center vents. My car had the same problem as yours; I took it out and was able to join it back together with 5 min epoxy. I then sanded the expoxied areas and puffed some black paint over the repairs, can't tell it was ever cracked.
#20
Joined: Dec 2007
Posts: 862
Likes: 1
Car: 92 25th anv camaro rs
Engine: 305 tbi
Axle/Gears: 3.08s non posi
Re: 1987 Iroc-Z Camaro
still have the 16x8s? if so does tires come on them, and if so how is the tread?
also how about the hood and front chin spoiler?
and do you have 91-92 style glass ttops? w/bag?
finally is it an electric pull down motor? bc i need the whole plastic the motor rides in, if itll fit a 92. i need to check on that.
and does that hath have defrost on it?
also how about the hood and front chin spoiler?
and do you have 91-92 style glass ttops? w/bag?
finally is it an electric pull down motor? bc i need the whole plastic the motor rides in, if itll fit a 92. i need to check on that.
and does that hath have defrost on it?
#21
Thread Starter
Junior Member
Joined: Apr 2016
Posts: 14
Likes: 0
From: Hampton Roads, VA
Car: 89 Camaro
Engine: 385
Transmission: '94 T-56
Axle/Gears: Broken 10 Bolt
Re: 1987 Iroc-Z Camaro
I do have the 16x8 pictured in one of the above posts, they do have tires, but I would not drive on them if it were me. $100
Hood is available and usable as is if your car is black, $250. Are you talking about the air dam that goes below the rad or the front outer chin spoiler ground fx type piece? It has no air damn, but the outer ground fx is available. $60
I am not sure what style that is, I have a couple odd T-tops, let me know what the 91-92 style is and I can check.
I do not have the motor, but the track is still in the car.
This hatch does not have defrost.
Please let me know if you want pix of anything.
Hood is available and usable as is if your car is black, $250. Are you talking about the air dam that goes below the rad or the front outer chin spoiler ground fx type piece? It has no air damn, but the outer ground fx is available. $60
I am not sure what style that is, I have a couple odd T-tops, let me know what the 91-92 style is and I can check.
I do not have the motor, but the track is still in the car.
This hatch does not have defrost.
Please let me know if you want pix of anything.
#22
Joined: Dec 2007
Posts: 862
Likes: 1
Car: 92 25th anv camaro rs
Engine: 305 tbi
Axle/Gears: 3.08s non posi
Re: 1987 Iroc-Z Camaro
I'll take the wheels
And the ground effect chin spoiler, that was indeed what I was talking about.
Can I get a pic of the patch part the hatch motor ran in.
And if no air dam does that mean you have a mechanical fan shroud?
And I'll check on the ttops. I think they are pin style?
And the ground effect chin spoiler, that was indeed what I was talking about.
Can I get a pic of the patch part the hatch motor ran in.
And if no air dam does that mean you have a mechanical fan shroud?
And I'll check on the ttops. I think they are pin style?
#23
Thread Starter
Junior Member
Joined: Apr 2016
Posts: 14
Likes: 0
From: Hampton Roads, VA
Car: 89 Camaro
Engine: 385
Transmission: '94 T-56
Axle/Gears: Broken 10 Bolt
Re: 1987 Iroc-Z Camaro
I'll a pic of it in a bit. I have t-tops with the big pin and small pin. If your gonna pick this stuff up from Roanoke, it would be easy to check out when you come...
#25
Joined: Dec 2007
Posts: 862
Likes: 1
Car: 92 25th anv camaro rs
Engine: 305 tbi
Axle/Gears: 3.08s non posi
Re: 1987 Iroc-Z Camaro
Pretty sure it's the smaller pin. Do you have 2 glass ones? And a ttop bag?
If the hatch plastic piece I'm talking about will work how much for it?
And ya I was thinking of picking it up.
If the hatch plastic piece I'm talking about will work how much for it?
And ya I was thinking of picking it up.
#26
Thread Starter
Junior Member
Joined: Apr 2016
Posts: 14
Likes: 0
From: Hampton Roads, VA
Car: 89 Camaro
Engine: 385
Transmission: '94 T-56
Axle/Gears: Broken 10 Bolt
Re: 1987 Iroc-Z Camaro
Here is a pick of what's left of the hatch pull down mechanism.
I do not have a bag for the T-Tops, I have the set on the car and a spare. One on the car has the outer piece of trim broken on it.
I do not have a bag for the T-Tops, I have the set on the car and a spare. One on the car has the outer piece of trim broken on it.
#27
Thread Starter
Junior Member
Joined: Apr 2016
Posts: 14
Likes: 0
From: Hampton Roads, VA
Car: 89 Camaro
Engine: 385
Transmission: '94 T-56
Axle/Gears: Broken 10 Bolt
Re: 1987 Iroc-Z Camaro
I do not have the shifter or shift plate. I do have the cover for the ratchet shift though; $10.
#28
Joined: Dec 2007
Posts: 862
Likes: 1
Car: 92 25th anv camaro rs
Engine: 305 tbi
Axle/Gears: 3.08s non posi
Re: 1987 Iroc-Z Camaro
thanks. that isnt the hatch stuff im looking for. but the rims and chin spolier i do want. and maybe the ttops if they are glass and fit my car. ill pm you
#29
Thread Starter
Junior Member
Joined: Apr 2016
Posts: 14
Likes: 0
From: Hampton Roads, VA
Car: 89 Camaro
Engine: 385
Transmission: '94 T-56
Axle/Gears: Broken 10 Bolt
Re: 1987 Iroc-Z Camaro
Darkmj16, here are pics of the t-tops that I have free. the bottom tow are a set with small pins and the other has hooks. The two that are on the car also have small pins. You're welcome to have your pick of any mixed and matched.
Thread
Thread Starter
Forum
Replies
Last Post