When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm trying to piece together a car. Been years since I worked on a third gen. To save time looking through pics after pics where does this harness go to.
Ok here I go again. Kinda hard to see in. This pic but it's a small black plug yellow wires with a black sheeth. Comes out of steering column. Last plug on my rewire and I can't figure it out
The other wires the black plug connects to, one of them is a purple wire if I can remember correctly. I know on the 89 model the wires are yellow for vats and 91-92 models the wires are white that run through the steering column to the ignition. Very thin and delicate wires, especially at the ignition switch. they usually break at the ignition over time from the constant turning of the ignition switch.
Ok cool so in my situation it's useless. Car is gutted there's no pcm or vats around. I agree I wouldn't disable it if I had all the parts. Being this car was stripped this is one thing I won't add back.
Good deal! Best of luck on the build man. Are you going to do a thread of the rebuild? What year and model is she? What are your plans for the engine or paint?
it was an 88 gta. somewhere along its life it became a parts car and was stripped. I am rebuilding it. got a cheap 454 im gonna build for it. Then where painting it a flat purple with graphire accents.
Build thread i would but its been work then abou 3hours of car rinse lather repeat.
08-09-2016, 03:47 PM
