loose wire
#3
#4
Supreme Member
iTrader: (58)
Re: loose wire
It plugs into the only open sensor in your photos. The fan switch is between the #6 and #8 spark plugs, can't miss it. The wire is missing the plastic shell that would snap onto the fan switch, it'd look just like the plastic shell on the knock sensor which is visible in the second photo next to the starter. Search for a fan switch pigtail at your favorite auto parts website. Should be able to just remove the plastic shell from the pigtail and snap it onto the existing terminal.
#5
Senior Member
iTrader: (2)
Join Date: May 2003
Location: Huntsville, AL
Posts: 539
Likes: 0
Received 2 Likes
on
2 Posts
Car: 87 GTA, 88 GTA, 92 TA, 72 RS SS
Engine: 350, 350, 305, 396
Transmission: T56, 700r4, 700r4, T56
Axle/Gears: 3.42, 3.23, 3.23, 3.73
Re: loose wire
Visual of what drew explained:
connector you will need:
http://www.ebay.com/itm/like/311674922470?lpid=82&chn=ps&ul_noapp=true
connector you will need:
http://www.ebay.com/itm/like/311674922470?lpid=82&chn=ps&ul_noapp=true
#6
Re: loose wire
It plugs into the only open sensor in your photos. The fan switch is between the #6 and #8 spark plugs, can't miss it. The wire is missing the plastic shell that would snap onto the fan switch, it'd look just like the plastic shell on the knock sensor which is visible in the second photo next to the starter. Search for a fan switch pigtail at your favorite auto parts website. Should be able to just remove the plastic shell from the pigtail and snap it onto the existing terminal.
Ok thx I found it! ordered at NAPA Standard part # S-550 thx drew!!
#7
Re: loose wire
Visual of what drew explained:
connector you will need:
Camaro Firebird 90 92 TPI Cooling Fan Switch Connector Pigtail | eBay
connector you will need:
Camaro Firebird 90 92 TPI Cooling Fan Switch Connector Pigtail | eBay
Thread
Thread Starter
Forum
Replies
Last Post
327_TPI_77_Maro
Classified Ads Feedback Board
23
12-10-2009 08:50 PM