Factory Original Wiper Blades 1987 Camaro
#1
Banned
Thread Starter
Factory Original Wiper Blades 1987 Camaro
Does anybody here have some detail photos they can share on factory correct wiper blades as installed for the 1987 model year?
#2
Senior Member
iTrader: (3)
Join Date: Jul 2000
Location: MA
Posts: 732
Received 18 Likes
on
15 Posts
Car: 92 & 91 Z28 1LEs, 87 IROC-Z, 90 ZR1
Engine: L98, LT5
Transmission: 700R4, 6-speed
Axle/Gears: 3.45, 3.42, 3.73, 3.27
Re: Factory Original Wiper Blades 1987 Camaro
I do I plan to move my 87 off the lift, i'll snap some for you tomorrow!
#4
Senior Member
Re: Factory Original Wiper Blades 1987 Camaro
My '88 GTA came with ANCO blades from the factory. I replaced them just this year.
#6
Re: Factory Original Wiper Blades 1987 Camaro
Are you interested in everything, including the original rubber, or just all of the original metal components?
My Formula still has all of its original metal components. Whenever I needed new blades, I simply opted for rubber refills and slipped them into the original metal components.
My Formula still has all of its original metal components. Whenever I needed new blades, I simply opted for rubber refills and slipped them into the original metal components.
#7
Senior Member
iTrader: (3)
Join Date: Jul 2000
Location: MA
Posts: 732
Received 18 Likes
on
15 Posts
Car: 92 & 91 Z28 1LEs, 87 IROC-Z, 90 ZR1
Engine: L98, LT5
Transmission: 700R4, 6-speed
Axle/Gears: 3.45, 3.42, 3.73, 3.27
Re: Factory Original Wiper Blades 1987 Camaro
I haven't forgotten! My car is still on the lift and I have to move the others to get it down. I'll have it down and get some pics this afternoon
Trending Topics
#8
Banned
Thread Starter
Re: Factory Original Wiper Blades 1987 Camaro
Are you interested in everything, including the original rubber, or just all of the original metal components?
My Formula still has all of its original metal components. Whenever I needed new blades, I simply opted for rubber refills and slipped them into the original metal components.
My Formula still has all of its original metal components. Whenever I needed new blades, I simply opted for rubber refills and slipped them into the original metal components.
Yes-(kind of) Everything that slides over the PIN on the arms.
#9
Senior Member
#10
Senior Member
iTrader: (3)
Join Date: Jul 2000
Location: MA
Posts: 732
Received 18 Likes
on
15 Posts
Car: 92 & 91 Z28 1LEs, 87 IROC-Z, 90 ZR1
Engine: L98, LT5
Transmission: 700R4, 6-speed
Axle/Gears: 3.45, 3.42, 3.73, 3.27
Re: Factory Original Wiper Blades 1987 Camaro
Sorry it took me a while, was able to move all the cars around today and get it off the lift. Here are some pics. I was told by the orig owner that these were original. If you need other pics, please let me know. My car is an 87 Norwood car.
Thanks, Erik
Thanks, Erik
#11
Banned
Thread Starter
Re: Factory Original Wiper Blades 1987 Camaro
Erik...Thanks!
I think the current AC Delco blades might be factory correct?
Opinions?
http://www.acdelco.com/auto-parts/wi...er-blades.html
I think the current AC Delco blades might be factory correct?
Opinions?
http://www.acdelco.com/auto-parts/wi...er-blades.html
#12
Moderator
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,242
Received 170 Likes
on
125 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
Re: Factory Original Wiper Blades 1987 Camaro
AT one time did these not have replaceable blades?
I know everything has gone to the "replacement assembly" I just wonder where to get the blades themselves.
I know everything has gone to the "replacement assembly" I just wonder where to get the blades themselves.
Last edited by okfoz; 07-25-2016 at 03:50 PM.
#13
Supreme Member
Re: Factory Original Wiper Blades 1987 Camaro
I don't recall that they did, just because I vaguely remember the arms having a bent over portion that held the squeegee in place. I cut the bent over portion off and used the refills that have the little squeeze clip to retain the refill.
Years later, after not being able to find refills with the squeeze clip, I just replaced the entire blade. That's when I discovered the limited clearance with the back edge of the hood.
I could be mistaken because we're talking almost 30 years ago and my memory is pretty poor due to age.
After seeing the photos that Erik posted and browsing a few catalogs, I "think" that a Trico 18-2 blade is close to an identical or close match to the OEM blade (two arms, spring loaded at the pin)....if the photos I've seen are the actual blade and not just a representation (which most are).
Rock Auto has them on close out for $1.28 each. Ridiculous, yes so I placed an order for more than a few. I'll let you guys know what they look like on Thursday.
Years later, after not being able to find refills with the squeeze clip, I just replaced the entire blade. That's when I discovered the limited clearance with the back edge of the hood.
I could be mistaken because we're talking almost 30 years ago and my memory is pretty poor due to age.
After seeing the photos that Erik posted and browsing a few catalogs, I "think" that a Trico 18-2 blade is close to an identical or close match to the OEM blade (two arms, spring loaded at the pin)....if the photos I've seen are the actual blade and not just a representation (which most are).
Rock Auto has them on close out for $1.28 each. Ridiculous, yes so I placed an order for more than a few. I'll let you guys know what they look like on Thursday.
#15
Moderator
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,242
Received 170 Likes
on
125 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
Re: Factory Original Wiper Blades 1987 Camaro
I know Scott Moyer has been really quite particular to his 87, I wonder if he still has his original blade assemblies.
#16
Supreme Member
iTrader: (58)
Re: Factory Original Wiper Blades 1987 Camaro
Aside from replacing the rubber inserts, I kept the stock wipers on most of my thirdgens. I'm sure I have at least a few sets of the metal. Used to be a person could find Anco refills for next to nothing in all the Kmart/Walmart type places, along with the auto parts stores. When the replacement assemblies got so cheap, the refills disappeared.
Truth told, if you ever have to use the wipers, modern blades are better since they generally support more of the rubber. The OE 4 point support usually leaves gaps and streaks unless the rubber is virtually new and the windshield is spotlessly clean.
Truth told, if you ever have to use the wipers, modern blades are better since they generally support more of the rubber. The OE 4 point support usually leaves gaps and streaks unless the rubber is virtually new and the windshield is spotlessly clean.
#17
Moderator
Re: Factory Original Wiper Blades 1987 Camaro
I still have the original arms. I only replaced the rubber on mine. They have only been done once or twice in their lifetime, but the arm and blade is still original on mine and the rubber is all that's new. I'll try to get some pics later.
#19
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,896
Received 912 Likes
on
599 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: Factory Original Wiper Blades 1987 Camaro
How long are those refills?
I like the trico 18-2 replacements, they are veeery close to the same look. The center spring pin cover area is a bit different than what I'm seeing on the 87s here.
I like the trico 18-2 replacements, they are veeery close to the same look. The center spring pin cover area is a bit different than what I'm seeing on the 87s here.
#20
Banned
Thread Starter
Re: Factory Original Wiper Blades 1987 Camaro
Many thanks to everybody that participated here! This is great detail on a good topic for what is really original.
It looks as though I need to be looking to locate some original factory OEM metal frames and re blade them.
It looks as though I need to be looking to locate some original factory OEM metal frames and re blade them.
#21
Moderator
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,242
Received 170 Likes
on
125 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
Re: Factory Original Wiper Blades 1987 Camaro
There were a few blades
82-92 BLADE WSW (DELCO-BLACK 18") 22110158
82-90 INSERT WSW (TRICO) 12300301
82-92 BLADE WSW (DELCO-BLACK 18") 22110158
82-90 INSERT WSW (TRICO) 12300301
#22
Banned
Thread Starter
Re: Factory Original Wiper Blades 1987 Camaro
Yes... I noticed that. I wonder if I order will I be getting 22110158 or as replaced By 10283455?
I think 10283455 is the current part. A set of used blades may be the way to go??
I think 10283455 is the current part. A set of used blades may be the way to go??
#23
Moderator
#24
Banned
Thread Starter
Re: Factory Original Wiper Blades 1987 Camaro
Scott
Thanks! I do not need arms just factory correct blade assemblies and refills.
Can anyone tell me if the Anco's were GM supplied from the factory?
From the EBay auction link they look polished and no star pattern on the spring clip attachment point.
Thanks! I do not need arms just factory correct blade assemblies and refills.
Can anyone tell me if the Anco's were GM supplied from the factory?
From the EBay auction link they look polished and no star pattern on the spring clip attachment point.
#25
Moderator
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,242
Received 170 Likes
on
125 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
Re: Factory Original Wiper Blades 1987 Camaro
Ancos are mentioned in the IPC, but Trico and Delco are the only brands of the blade assemblies mentioned.
#26
Supreme Member
Re: Factory Original Wiper Blades 1987 Camaro
I don't recall that they did, just because I vaguely remember the arms having a bent over portion that held the squeegee in place. I cut the bent over portion off and used the refills that have the little squeeze clip to retain the refill.
Years later, after not being able to find refills with the squeeze clip, I just replaced the entire blade. That's when I discovered the limited clearance with the back edge of the hood.
I could be mistaken because we're talking almost 30 years ago and my memory is pretty poor due to age.
After seeing the photos that Erik posted and browsing a few catalogs, I "think" that a Trico 18-2 blade is close to an identical or close match to the OEM blade (two arms, spring loaded at the pin)....if the photos I've seen are the actual blade and not just a representation (which most are).
Rock Auto has them on close out for $1.28 each. Ridiculous, yes so I placed an order for more than a few. I'll let you guys know what they look like on Thursday.
Years later, after not being able to find refills with the squeeze clip, I just replaced the entire blade. That's when I discovered the limited clearance with the back edge of the hood.
I could be mistaken because we're talking almost 30 years ago and my memory is pretty poor due to age.
After seeing the photos that Erik posted and browsing a few catalogs, I "think" that a Trico 18-2 blade is close to an identical or close match to the OEM blade (two arms, spring loaded at the pin)....if the photos I've seen are the actual blade and not just a representation (which most are).
Rock Auto has them on close out for $1.28 each. Ridiculous, yes so I placed an order for more than a few. I'll let you guys know what they look like on Thursday.
The first obvious difference is the beam length. The Trico beams are full length of the squeegee. The OEM blade beams stop short of the squeegee ends (compare with photos of originals posted elsewhere):
Close-up of the pin retainer area:
Blade beam end:
You can see the difference in how much lower the Trico blade sits than typical six-point contact replacement blades.
Another detail to ponder; are the OEM squeegees date and time stamped like these replacements?:
#27
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,896
Received 912 Likes
on
599 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: Factory Original Wiper Blades 1987 Camaro
The blades arrived from Rock Lobster. They're private label, meaning they're boxed for a specific retailer. In this case, NAPA.
The first obvious difference is the beam length. The Trico beams are full length of the squeegee. The OEM blade beams stop short of the squeegee ends (compare with photos of originals posted elsewhere):
You can see the difference in how much lower the Trico blade sits than typical six-point contact replacement blades.
The first obvious difference is the beam length. The Trico beams are full length of the squeegee. The OEM blade beams stop short of the squeegee ends (compare with photos of originals posted elsewhere):
You can see the difference in how much lower the Trico blade sits than typical six-point contact replacement blades.
The blades you have on the arms in this picture are incorrect for the car and that's why you are having issues. Those are 18-1 hook/clip style and not 18-2 pin style.
Last edited by TTOP350; 07-28-2016 at 08:33 PM.
#28
Supreme Member
Re: Factory Original Wiper Blades 1987 Camaro
There are no issues with clearance. They clear the edge of the hood.
#29
Moderator
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,242
Received 170 Likes
on
125 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
Re: Factory Original Wiper Blades 1987 Camaro
The original squeegee, more than likely did not have a laser date stamp, that is put on by laser marking technology and that technology was not available in 1987...
#30
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,896
Received 912 Likes
on
599 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: Factory Original Wiper Blades 1987 Camaro
It's been so long since those were installed (+10 years?) I have no idea what brand or P/N they are. The book said 18" blades so that's what I put on. I haven't really thought much about keeping it looking original as long as they do what they're designed to do.
There are no issues with clearance. They clear the edge of the hood.
There are no issues with clearance. They clear the edge of the hood.
Here is a pic of the hook type and how they work. (almost need a special degree to figure out all the different types!)
Last edited by TTOP350; 07-29-2016 at 07:27 AM.
#31
Moderator
Re: Factory Original Wiper Blades 1987 Camaro
I've replaced the blades once or twice and I've actually taken the rubber from the new blades and transferred it over to the original arms. I re-thread the new rubber into the metal black trim piece and reinsert that into the factory blade assembly. So the only part replaced on mine is the rubber!
#32
Member
Re: Factory Original Wiper Blades 1987 Camaro
My 85' are complete factory, since its never been in the rain, ive never had to replace any part of them. I can post pics if you wish.
#33
Moderator
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,242
Received 170 Likes
on
125 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
Re: Factory Original Wiper Blades 1987 Camaro
I was told the other day that stores can still get the inserts (squeegee only) but you have to special order them. I didn't try, but I would be interested to know if anyone has done this.
#34
Banned
Thread Starter
#39
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,896
Received 912 Likes
on
599 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: Factory Original Wiper Blades 1987 Camaro
I'm fairly sure you need 18-2
#40
Senior Member
iTrader: (1)
Re: Factory Original Wiper Blades 1987 Camaro
https://www.rockauto.com/en/catalog/...per+blade,8852
On the rockauto side it says: TRICO 18-1 with hole in the side...I supose that's for the pin arm on my car.....?
On the TRICO side it says the same:18-1 with hole in the side of the blade....??
http://www.tricoproducts.com/Drivers/FindYourWiperSize
On the rockauto side it says: TRICO 18-1 with hole in the side...I supose that's for the pin arm on my car.....?
On the TRICO side it says the same:18-1 with hole in the side of the blade....??
http://www.tricoproducts.com/Drivers/FindYourWiperSize
Last edited by Fire"Dutch"Bird; 10-22-2016 at 09:36 AM.
#41
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,896
Received 912 Likes
on
599 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: Factory Original Wiper Blades 1987 Camaro
Have been using 18-2s since I bought the car over 25yrs ago.
I just got a box of 20 from rock auto, 18-2 for my cars and they fit right soooo I dunno whats going on.
I just got a box of 20 from rock auto, 18-2 for my cars and they fit right soooo I dunno whats going on.
#43
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,896
Received 912 Likes
on
599 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: Factory Original Wiper Blades 1987 Camaro
Should be, I think the 1s are large pins or J hook style??
Last edited by TTOP350; 10-22-2016 at 11:47 PM.
#44
Senior Member
iTrader: (1)
Re: Factory Original Wiper Blades 1987 Camaro
Look at this picture: the wiper in the pakkage, 18-2, looks very different from the wiper in front...??
http://redirect.viglink.com/?format=...%20Boards&txt=
And the wiper in front is what I need.
Pictures on the Rockauto site adds to the confusing as well...
http://redirect.viglink.com/?format=...%20Boards&txt=
And the wiper in front is what I need.
Pictures on the Rockauto site adds to the confusing as well...
#45
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,896
Received 912 Likes
on
599 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: Factory Original Wiper Blades 1987 Camaro
Looks like the arm in front of the package came from the package. (package is labeled correctly as a 18-2)
A lot of times there is a generic picture that's used on packaging instead of the actual product.
A lot of times there is a generic picture that's used on packaging instead of the actual product.
#46
Senior Member
iTrader: (1)
Re: Factory Original Wiper Blades 1987 Camaro
Look closer at the wiper in the 18-2 pakkage, it is a hook style one for sure...!!
It's not the same like the one in front..
Btw, I cancelled my Rockauto order for the 18-1, I can't afford $22 shipping costs for the wrong wipers..
It's not the same like the one in front..
Btw, I cancelled my Rockauto order for the 18-1, I can't afford $22 shipping costs for the wrong wipers..
#47
Supreme Member
Re: Factory Original Wiper Blades 1987 Camaro
The 18-1 will fit; the plastic thing for the hook style arm just flips around to lock the blade to the pin style arm. However, there might be potential hood clearance issues with the -1's.
I've used -1,s in the past (see the photos I've posted) without issue. The -2's definitely look better.
I've used -1,s in the past (see the photos I've posted) without issue. The -2's definitely look better.
#49
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,896
Received 912 Likes
on
599 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: Factory Original Wiper Blades 1987 Camaro
The blade you are seeing in the package is just a generic item picture...