TBI throttle body and misc body/interior
#1
Member
Thread Starter
iTrader: (6)
Join Date: Apr 2013
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 ws6
Engine: Carb'd 334 stroker
Transmission: T5
TBI throttle body and misc body/interior
Hello, all. Needing to clear some space, so some of the parts need to either be sold or trashed.
I have a mix of misc interior, exterior and engine stuff.
Engine wise, I have a fairly new looking throttle body. I recently bought a 92 formula, this was inside the car. Whether it works or not, I can't say for sure, however it's remarkably clean and appears to be in excellent shape. Asking $20 + shipping
Also have the insert for a power bulge hood. It's red, obviously, and its a bit scuffed up, plus the clear coat is starting to lift on the edge. No dents or cracks, and the silver filler thing in the rear is in good shape. Asking $20
I have more but forgot to take pics..
I have other misc interior trim pieces, $??
Stock third gen radiator $50
Stock am/FM basic radio from a..82? I think bird. -$15
Radio/hvac bezel from a camaro $10
Dual fan mount with two of the little fans. Both work, one is just squeaky. $20
Blower motor, the kind with a single blade connector, works fine. -$10
The coolant diverter valve off a 92 formula tbi, $10
MSD blaster II ignition coil, the pre-hei type ones
The black box thing that connects to the air pump, I also have that in good shape $10
At some point in the future I'll also have the air pump and the emissions crap that's on the exhaust manifold.
Also I have a stock TBI manifold. Quite dirty with buildup if anyone wants it. Free + shipping
Stock vortec intake manifold off a 2000 pickup
MAF off same pickup
Dizzy off same pickup
I'm also doing a LS swap on a 97 Mercedes e420, so everything engine and transmission wise is up for sale too. I won't lost everything out since this is a f-body forum lol.
I have a mix of misc interior, exterior and engine stuff.
Engine wise, I have a fairly new looking throttle body. I recently bought a 92 formula, this was inside the car. Whether it works or not, I can't say for sure, however it's remarkably clean and appears to be in excellent shape. Asking $20 + shipping
Also have the insert for a power bulge hood. It's red, obviously, and its a bit scuffed up, plus the clear coat is starting to lift on the edge. No dents or cracks, and the silver filler thing in the rear is in good shape. Asking $20
I have more but forgot to take pics..
I have other misc interior trim pieces, $??
Stock third gen radiator $50
Stock am/FM basic radio from a..82? I think bird. -$15
Radio/hvac bezel from a camaro $10
Dual fan mount with two of the little fans. Both work, one is just squeaky. $20
Blower motor, the kind with a single blade connector, works fine. -$10
The coolant diverter valve off a 92 formula tbi, $10
MSD blaster II ignition coil, the pre-hei type ones
The black box thing that connects to the air pump, I also have that in good shape $10
At some point in the future I'll also have the air pump and the emissions crap that's on the exhaust manifold.
Also I have a stock TBI manifold. Quite dirty with buildup if anyone wants it. Free + shipping
Stock vortec intake manifold off a 2000 pickup
MAF off same pickup
Dizzy off same pickup
I'm also doing a LS swap on a 97 Mercedes e420, so everything engine and transmission wise is up for sale too. I won't lost everything out since this is a f-body forum lol.
#6
Member
Thread Starter
iTrader: (6)
Join Date: Apr 2013
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 ws6
Engine: Carb'd 334 stroker
Transmission: T5
More random pics. Make an offer, I would rather someone who needs it get it instead of the trash.
Grey cupholder that was half assedly sprayed black. No other info, was in the back of a car I bought..$10 + ship
Air inlet thing from a TBI formula. $10
Plus glass packs if anyone wants em. I have lots lol.
993 heads with Eddy VC. Good shape, but need new valve guides. Pulled off a running motor.
$120
305 short block.
Needs new rings, but otherwise in good shape.
1pc rms, mild flat tappet cam.
$150
Grey cupholder that was half assedly sprayed black. No other info, was in the back of a car I bought..$10 + ship
Air inlet thing from a TBI formula. $10
Plus glass packs if anyone wants em. I have lots lol.
993 heads with Eddy VC. Good shape, but need new valve guides. Pulled off a running motor.
$120
305 short block.
Needs new rings, but otherwise in good shape.
1pc rms, mild flat tappet cam.
$150
Trending Topics
#8
Member
Thread Starter
iTrader: (6)
Join Date: Apr 2013
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 ws6
Engine: Carb'd 334 stroker
Transmission: T5
Also, more pics of everything
Dust and spiders are included with every order for no extra charge! All the interior pieces will need re painted. They came off a parts car I bought where a p.o. decided halfass spraypaint black was a better look than factory gray.
The factory speakers do work well, the covers are intact, although the glue let go on one of them.
The dash gauge cover is in fair shape. Was a power hatch model, has the switch. The other spots where a defrost switch would go has a hole drilled for a switch, and the other is broken.
Throttle body looks new, radio looks in good shape but I can't confirm if it works.
Blower motor works like a champ, little dash speakers work just fine.
Emissions stuff was taken off a running car and not mangled.
Coolant tank is dirty but good physical condition.
Under dash hush panel is missing the foam and door.
The red piece is a new predator body piece, passenger side rear fender. Still has the factory adhesive. Not in a hurry to sell this or give it away.
Arm rests are also were gray. Fair shape, looks like the leather is ever so slightly lifting.
I'm now at "make an offer, I need it gone" pricing.
Thread
Thread Starter
Forum
Replies
Last Post