[TX] 1987 Formula part out
#1
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2007
Location: college station, texas
Posts: 632
Likes: 0
Received 6 Likes
on
5 Posts
Car: numerous
Engine: ls1, others
Transmission: t56, others
Axle/Gears: 3.23 7.6"
1987 Formula part out
87 formula 5.7 TPI/700r4
Have complete tpi set up with painless harness and ecm tuned for a 383 - $400
88999196 sped density ecm new ac delco - $70
k member - $40
coolant recovery tank - $10
windshield wiper motor(built in wiper fluid pump) - $15
rear seat blets - $15
driver side seatbelt - $5
front calipers(a year old) - $5
headlight harness(could use new connector for one of the headlights) - $15
ac evap core - $20
Under dash hvac system - $40
dash assembly - $80
Rear hatch lift struts(in good shape) - $30 for both
New set of rear shocks - $30
Dash pad has couple of cracks, but decent overall shape. - $50
Good T-tops - $150 with the bag(zipper has damage)
gauge cluster from a different car - 120mph, odometer stopped recently working - $20
rear end - sold
Grey interior, plastics - $80
taillights have some damage shown in pictures - $10 for both
rear bumper cover - $30
front left fender - $30
front suspension(a year old) - $80
steering gear box - $30
hand brake - $10
auto shifter - $10
front aero parts - $40
body wiring - $70
tail light wiring - $30
320W 4 ch amp - sold
Dual fan setup - sold
ac condenser - sold
steering column - sold
Rear Hatch glass - sold
pedals - sold
front and rear seats together as a package - sold
steering wheel - sold
door mirrors - sold
Magnaflow catback - sold
4th gen camaro wheels(two tires are %95, other two tires are bad) - sold
center console - sold
front bumper cover - sold
two jl audio Subs 12w3 v3.4 12" in the back with the box - sold
both lights with motors - sold
front engine accessories - sold
radiator - sold
headliner - sold
hood - sold
engine - sold
panhard bar - sold
doors - sold
Rear spoiler is available, needs repair on one side where it mounts - sold
700r4 - sold
holley throttle body - sold
Magnaflow y-pipe never installed - sold
front and rear seats together as a package - sold
Have complete tpi set up with painless harness and ecm tuned for a 383 - $400
88999196 sped density ecm new ac delco - $70
k member - $40
coolant recovery tank - $10
windshield wiper motor(built in wiper fluid pump) - $15
rear seat blets - $15
driver side seatbelt - $5
front calipers(a year old) - $5
headlight harness(could use new connector for one of the headlights) - $15
ac evap core - $20
Under dash hvac system - $40
dash assembly - $80
Rear hatch lift struts(in good shape) - $30 for both
New set of rear shocks - $30
Dash pad has couple of cracks, but decent overall shape. - $50
Good T-tops - $150 with the bag(zipper has damage)
gauge cluster from a different car - 120mph, odometer stopped recently working - $20
rear end - sold
Grey interior, plastics - $80
taillights have some damage shown in pictures - $10 for both
rear bumper cover - $30
front left fender - $30
front suspension(a year old) - $80
steering gear box - $30
hand brake - $10
auto shifter - $10
front aero parts - $40
body wiring - $70
tail light wiring - $30
320W 4 ch amp - sold
Dual fan setup - sold
ac condenser - sold
steering column - sold
Rear Hatch glass - sold
pedals - sold
front and rear seats together as a package - sold
steering wheel - sold
door mirrors - sold
Magnaflow catback - sold
4th gen camaro wheels(two tires are %95, other two tires are bad) - sold
center console - sold
front bumper cover - sold
two jl audio Subs 12w3 v3.4 12" in the back with the box - sold
both lights with motors - sold
front engine accessories - sold
radiator - sold
headliner - sold
hood - sold
engine - sold
panhard bar - sold
doors - sold
Rear spoiler is available, needs repair on one side where it mounts - sold
700r4 - sold
holley throttle body - sold
Magnaflow y-pipe never installed - sold
front and rear seats together as a package - sold
Last edited by yevgenievich; 11-25-2016 at 02:37 PM.
#2
#4
Member
Join Date: Jul 2006
Location: Tickfaw, LA
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 & 88 GTA, 89 Formy, 89 bird
Engine: 3 - 350 TPI, 305 TBI
Transmission: All 700R4's
Axle/Gears: unknown
Re: 1987 Formula part out
is the hood available?
No rust - I hope
No rust - I hope
#6
Supreme Member
iTrader: (1)
Join Date: May 2015
Location: Temecula, CA
Posts: 1,154
Received 85 Likes
on
68 Posts
Car: 1989 Pontiac Formula 350
Engine: L98
Transmission: 700R4
Axle/Gears: BorgWarner 3.27 Posi
Re: 1987 Formula part out
Too many people parting out good cars.
This is why we'll have very few on the road in 10 years.
This is why we'll have very few on the road in 10 years.
#7
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2007
Location: college station, texas
Posts: 632
Likes: 0
Received 6 Likes
on
5 Posts
Car: numerous
Engine: ls1, others
Transmission: t56, others
Axle/Gears: 3.23 7.6"
Re: 1987 Formula part out
The car is still complete and if someone want it, it is available complete. But it does have previously repaired damage in the rear, front passenger side damage and the t-top swap.
If someone wants to pay $2400 for it all, it is available. Someone cared for it as some point of time, but somewhere down the line things did not go so well for it.
Trending Topics
#8
Supreme Member
iTrader: (1)
Join Date: May 2015
Location: Temecula, CA
Posts: 1,154
Received 85 Likes
on
68 Posts
Car: 1989 Pontiac Formula 350
Engine: L98
Transmission: 700R4
Axle/Gears: BorgWarner 3.27 Posi
Re: 1987 Formula part out
not originally a t-top car, and not executed well. Was going to sell as complete car, but decided to part out after finding the roof swap.
The car is still complete and if someone want it, it is available complete. But it does have previously repaired damage in the rear, front passenger side damage and the t-top swap.
If someone wants to pay $2400 for it all, it is available. Someone cared for it as some point of time, but somewhere down the line things did not go so well for it.
The car is still complete and if someone want it, it is available complete. But it does have previously repaired damage in the rear, front passenger side damage and the t-top swap.
If someone wants to pay $2400 for it all, it is available. Someone cared for it as some point of time, but somewhere down the line things did not go so well for it.
#12
Member
Join Date: Jul 2006
Location: Tickfaw, LA
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 & 88 GTA, 89 Formy, 89 bird
Engine: 3 - 350 TPI, 305 TBI
Transmission: All 700R4's
Axle/Gears: unknown
Re: 1987 Formula part out
As a 3rd gen enthusiast, I would like to see more of these cars on the road
As a 3rd gen enthusiast who is trying to maintain and restore the 3rd gens I currently have, parts are good. Especially when there are none in the aftermarket.
#14
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2007
Location: college station, texas
Posts: 632
Likes: 0
Received 6 Likes
on
5 Posts
Car: numerous
Engine: ls1, others
Transmission: t56, others
Axle/Gears: 3.23 7.6"
Re: 1987 Formula part out
17" wheels with 235 tire in the front and 275 in the back
Last edited by yevgenievich; 04-05-2016 at 09:18 AM.
#15
Member
iTrader: (1)
Join Date: Oct 2010
Location: Virginia Beach, VA
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Firebird S/E
Engine: SBC 350, mild cam Vortec heads
Transmission: Rebuilt 700R4 vette servo+shift kit
Axle/Gears: 3.73
Re: 1987 Formula part out
can you get me a price + shipping (23455) for the drivers side fender, and is there anything wrong with it (looked good in pics)
#17
Junior Member
Join Date: Apr 2005
Location: Belton, TX
Posts: 20
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Trans Am Recaro Edition
Engine: 5.0L H.O. L69/ shaped to L31R 350.
Transmission: 700r4
Axle/Gears: 3.73 Posi
Re: 1987 Formula part out
looking to purchase hood, im in the temple area, can pick up. pm me a price and lets talk.
#19
Member
Join Date: Jul 2006
Location: Tickfaw, LA
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 & 88 GTA, 89 Formy, 89 bird
Engine: 3 - 350 TPI, 305 TBI
Transmission: All 700R4's
Axle/Gears: unknown
Re: 1987 Formula part out
As stated on the phone, should be there Saturday afternoon
#21
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2007
Location: college station, texas
Posts: 632
Likes: 0
Received 6 Likes
on
5 Posts
Car: numerous
Engine: ls1, others
Transmission: t56, others
Axle/Gears: 3.23 7.6"
Re: 1987 Formula part out
350tpi complete with holley throttle body and 700r4 trans are available. Trans does not have a correct spedo output. Trans was replaced on the car about a year ago.
And couple of more pictures.
Ypipe
And couple of more pictures.
Ypipe
#25
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2007
Location: college station, texas
Posts: 632
Likes: 0
Received 6 Likes
on
5 Posts
Car: numerous
Engine: ls1, others
Transmission: t56, others
Axle/Gears: 3.23 7.6"
Re: 1987 Formula part out
Headlights and motors work. Passenger side bracket that headlight is held on to has been repaired, but headlight/motor are fine. Seatbelts latch piece missing a plastic surround.
#27
Junior Member
iTrader: (2)
Join Date: Jan 2006
Location: Central Texas
Posts: 62
Received 0 Likes
on
0 Posts
Car: 87 Z28
Engine: TPI 350
Transmission: 700R4
Axle/Gears: 2:73
Re: 1987 Formula part out
What are you asking for the drivers door, and the rear end? Do you know what the ratio is??
I'm about an hour away..............
I'm about an hour away..............
#28
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2007
Location: college station, texas
Posts: 632
Likes: 0
Received 6 Likes
on
5 Posts
Car: numerous
Engine: ls1, others
Transmission: t56, others
Axle/Gears: 3.23 7.6"
Re: 1987 Formula part out
most pms replied,
will get the headlight pictures and ratio tomorrow. Did not have a chance to get to the car during the daylight last couple of days
will get the headlight pictures and ratio tomorrow. Did not have a chance to get to the car during the daylight last couple of days
#30
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2007
Location: college station, texas
Posts: 632
Likes: 0
Received 6 Likes
on
5 Posts
Car: numerous
Engine: ls1, others
Transmission: t56, others
Axle/Gears: 3.23 7.6"
Re: 1987 Formula part out
I will let you know if one of the above guys does not want both light assemblies.
some more pictures:
drivers door has a dent
Both pcv valves were bad, I had one new on the shelf, but other one just disconnected for now. PO cut the ac belt off because it robbed too much power. I will probably get a new one and verify ac works.
some more pictures:
drivers door has a dent
Both pcv valves were bad, I had one new on the shelf, but other one just disconnected for now. PO cut the ac belt off because it robbed too much power. I will probably get a new one and verify ac works.
#31
Moderator
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: 1987 Formula part out
You have pictures of the tire sizes, but I didn't see any good pics of the wheels.
What kind are they and how wide are they?
What kind are they and how wide are they?
#32
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2007
Location: college station, texas
Posts: 632
Likes: 0
Received 6 Likes
on
5 Posts
Car: numerous
Engine: ls1, others
Transmission: t56, others
Axle/Gears: 3.23 7.6"
Re: 1987 Formula part out
Wheels 9" wide, rear end 3.27 gears. And pictutes of the wheels. Do not know the brand.
#33
Moderator
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: 1987 Formula part out
17x9 is a reasonable size. Any idea what the offset is?
I was in C.S. today, I wish I had time to stop by and take a look.
I was in C.S. today, I wish I had time to stop by and take a look.
#34
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2007
Location: college station, texas
Posts: 632
Likes: 0
Received 6 Likes
on
5 Posts
Car: numerous
Engine: ls1, others
Transmission: t56, others
Axle/Gears: 3.23 7.6"
Re: 1987 Formula part out
4.25" backspacing
center console top shifter plate and the lid were damaged, but the actual console is intact.
center console top shifter plate and the lid were damaged, but the actual console is intact.
Last edited by yevgenievich; 04-11-2016 at 06:38 PM.
#36
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2007
Location: college station, texas
Posts: 632
Likes: 0
Received 6 Likes
on
5 Posts
Car: numerous
Engine: ls1, others
Transmission: t56, others
Axle/Gears: 3.23 7.6"
Re: 1987 Formula part out
more updates in main post
pictures of tail lights, hatch release solenoid, dash parts, speed density ecm, speed density stand alone harness
pictures of tail lights, hatch release solenoid, dash parts, speed density ecm, speed density stand alone harness
#37
Moderator
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: 1987 Formula part out
The backspacing isn't quite enough for me.
Is that a new ECM?
What are you asking for the ECM and TPI engine harness?
Is that a new ECM?
What are you asking for the ECM and TPI engine harness?
#38
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2007
Location: college station, texas
Posts: 632
Likes: 0
Received 6 Likes
on
5 Posts
Car: numerous
Engine: ls1, others
Transmission: t56, others
Axle/Gears: 3.23 7.6"
Re: 1987 Formula part out
It is a new 90-92 tpi ecm and new painless 90-92 engine harness. Asking $350 for both.
Or $300 for the harness and $120 for the ecm. Also have 86-89 reman ecm for $80
Or $300 for the harness and $120 for the ecm. Also have 86-89 reman ecm for $80
#39
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2007
Location: college station, texas
Posts: 632
Likes: 0
Received 6 Likes
on
5 Posts
Car: numerous
Engine: ls1, others
Transmission: t56, others
Axle/Gears: 3.23 7.6"
Re: 1987 Formula part out
hood/bumper/turn signals/radiator/center console/headlights sold
Lower aero plastics - $35
crush bar behind the bumper cover - $5
Lower aero plastics - $35
crush bar behind the bumper cover - $5
#40
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2007
Location: college station, texas
Posts: 632
Likes: 0
Received 6 Likes
on
5 Posts
Car: numerous
Engine: ls1, others
Transmission: t56, others
Axle/Gears: 3.23 7.6"
Re: 1987 Formula part out
updated first post with lowered pricing. speed density harness sold, have speed density new ecm for $80 or the maf ecm for $35.
#42
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2007
Location: college station, texas
Posts: 632
Likes: 0
Received 6 Likes
on
5 Posts
Car: numerous
Engine: ls1, others
Transmission: t56, others
Axle/Gears: 3.23 7.6"
Re: 1987 Formula part out
mirrors and steering wheel sold
700r4 dust shield cover - $5
seats - $130:
700r4 dust shield cover - $5
seats - $130:
#45
Member
iTrader: (2)
Join Date: May 2013
Location: Texas
Posts: 235
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 GTA
Engine: LS coming soon
Transmission: 80E coming soon
Axle/Gears: S60/35 Spline/S-Trac/3.73
Re: 1987 Formula part out
Do you ever come into Houston? I might be headed that way this weekend. Can you send me pictures of the spoiler damage?
#46
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2007
Location: college station, texas
Posts: 632
Likes: 0
Received 6 Likes
on
5 Posts
Car: numerous
Engine: ls1, others
Transmission: t56, others
Axle/Gears: 3.23 7.6"
Re: 1987 Formula part out
are you referring to the rear spoiler?
You can see in the following picture it is bowed because that mounting tab has ripped through the bottom. With some heat and plastic epoxy it could be put all back together. I can get better pictures this evening.
#47
Senior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2007
Location: college station, texas
Posts: 632
Likes: 0
Received 6 Likes
on
5 Posts
Car: numerous
Engine: ls1, others
Transmission: t56, others
Axle/Gears: 3.23 7.6"
Re: 1987 Formula part out
AC system is evacuated and front accessories available together with a working compressor.
T-tops and windshield available.
Also it now has a 4th gen camaro 16's with bad tires - $80 for set of 4 (2" spacers not available)
T-tops and windshield available.
Also it now has a 4th gen camaro 16's with bad tires - $80 for set of 4 (2" spacers not available)
#48
Junior Member
Join Date: Mar 2016
Location: Chesterton, IN
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Firebird Formula
Engine: 5.0 L 305 V8
Transmission: 5 Speed Manual
Re: 1987 Formula part out
How's the t top bag condition? Mine is crap. Also, if it's good, how much?
#49
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,896
Received 912 Likes
on
599 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: 1987 Formula part out
Do you have the other upper center part for the airdam ? Only need the upper 3 in the pic and the one not shown.