Fast response IAT sensor
05-14-2008, 11:22 AM
#1
Supreme Member
Thread Starter
Join Date: Mar 2005
Location: Benzie, MI
Posts: 1,665
Likes: 0
Received 3 Likes
on
3 Posts
Car: 91 rs
Engine: Blow through 383, 10 psi, xr288hr
Transmission: Manual th350 ATI 3000
Axle/Gears: 3.50 9"
Fast response IAT sensor
I'm looking for a quick responding IAT sensor and gauge to screw into my manifold. Anyone know where I could find one? The ones I've found are slow.
05-14-2008, 11:46 AM
#2
Supreme Member
iTrader: (1)
Join Date: Jan 2002
Location: garage
Posts: 4,432
Likes: 0
Received 1 Like
on
1 Post
Engine: 3xx ci tubo
Transmission: 4L60E & 4L80E
Re: Fast response IAT sensor
1990 V6 IAT.........fast responding. Use for boost applications. It is more fragile than the stock TPI IAT sensor.
05-14-2008, 11:54 AM
#3
Supreme Member
Thread Starter
Join Date: Mar 2005
Location: Benzie, MI
Posts: 1,665
Likes: 0
Received 3 Likes
on
3 Posts
Car: 91 rs
Engine: Blow through 383, 10 psi, xr288hr
Transmission: Manual th350 ATI 3000
Axle/Gears: 3.50 9"
Re: Fast response IAT sensor
Interesting, is it a screw in type?
What gauge can I use with it?
What gauge can I use with it?
05-14-2008, 12:24 PM
#5
Supreme Member
iTrader: (1)
Join Date: Jan 2002
Location: garage
Posts: 4,432
Likes: 0
Received 1 Like
on
1 Post
Engine: 3xx ci tubo
Transmission: 4L60E & 4L80E
Re: Fast response IAT sensor
The threads are 3/8" NPT...same as stock TPI IAT.
The electrical plug is different than the stock TPI IAT.
Use any gauge that will work with the stock TPI IAT, or just a voltmeter and lookup table.
The electrical plug is different than the stock TPI IAT.
Use any gauge that will work with the stock TPI IAT, or just a voltmeter and lookup table.
05-14-2008, 12:46 PM
#6
Supreme Member
Thread Starter
Join Date: Mar 2005
Location: Benzie, MI
Posts: 1,665
Likes: 0
Received 3 Likes
on
3 Posts
Car: 91 rs
Engine: Blow through 383, 10 psi, xr288hr
Transmission: Manual th350 ATI 3000
Axle/Gears: 3.50 9"
Re: Fast response IAT sensor
I like that idea. Once I figure out what my temps are, I'll add the alky injection, and then once I'm comfortable, I don't need the sensor or gauge anymore, so using a voltmeter would be a good cheap way.
About that lookup table......
About that lookup table......
Thread
Thread Starter
Forum
Replies
Last Post
