impeller on a paxton SN-93 supercharger
#1
Junior Member
Thread Starter
Join Date: Jul 2002
Location: FT WRIGHT,KY
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
impeller on a paxton SN-93 supercharger
How do I get the impeller assembly off of the Paxton SN-93 supercharger without breaking the impeller blades. It wants to turn when I turn the socket. thanks Scott
#2
Senior Member
Join Date: Oct 2002
Location: near seattle
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
Re: impeller on a paxton SN-93 supercharger
Scott,
I have a Paxton SN 2000 and have rebuilt mine a few times. So why are you taking the unit apart? These superchargers are easy to repair! Regarding the impeller, I use a piece of 2x2 that is 5 inches long. I prop the soft wood between the impeller and my work bench and slowly turn the 12pt bolt till it breaks free. I try and place the wood between the center and the far edge for best place of contact.
Good luck
I have a Paxton SN 2000 and have rebuilt mine a few times. So why are you taking the unit apart? These superchargers are easy to repair! Regarding the impeller, I use a piece of 2x2 that is 5 inches long. I prop the soft wood between the impeller and my work bench and slowly turn the 12pt bolt till it breaks free. I try and place the wood between the center and the far edge for best place of contact.
Good luck
#3
Junior Member
Thread Starter
Join Date: Jul 2002
Location: FT WRIGHT,KY
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Re: impeller on a paxton SN-93 supercharger
Scott,
I have a Paxton SN 2000 and have rebuilt mine a few times. So why are you taking the unit apart? These superchargers are easy to repair! Regarding the impeller, I use a piece of 2x2 that is 5 inches long. I prop the soft wood between the impeller and my work bench and slowly turn the 12pt bolt till it breaks free. I try and place the wood between the center and the far edge for best place of contact.
Good luck
I have a Paxton SN 2000 and have rebuilt mine a few times. So why are you taking the unit apart? These superchargers are easy to repair! Regarding the impeller, I use a piece of 2x2 that is 5 inches long. I prop the soft wood between the impeller and my work bench and slowly turn the 12pt bolt till it breaks free. I try and place the wood between the center and the far edge for best place of contact.
Good luck
----------
I am taking the unit apart to see if it needs to be rebuilt.Do you have any instructions how to take these units apart.I have the impeller off and am not sure what to do to get the rest of the unit apart.I am going to look at it tomorrow 2/23.thanks Scott
Last edited by SCOTT OVERMANN; 02-22-2008 at 01:04 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
toronto formula
Engine/Drivetrain/Suspension Parts for Sale
15
11-10-2015 06:17 AM
2000, 93, charger, difference, good, impeller, paxton, power, shaft, sn, sn2000, sn93, super, supercharger, superchargers