Kaiser Roto-charger on my Trans Am
#151
Supreme Member
Join Date: May 2006
Location: Maui, Hawaii
Posts: 1,857
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Trans Am
Engine: broken 385sbc
Transmission: G-Force rebuilt T-5
Axle/Gears: Currie 9" Ford 4.30:1
Re: Kaiser Roto-charger on my Trans Am
i want the 20 minutes of my life i spent reading this crap, back..
#152
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: California
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Trans Am & 1982 Corvette
Engine: L-98 with LO-3 induction. 350 CFI
Transmission: 5 speed and vette has 700r4
Axle/Gears: 373's in T/A .. vette unknown
Re: Kaiser Roto-charger on my Trans Am
Maybe next I will create a time machine out of my Trans Am and help you with you dilema hahahaha.
----------
Just wanted to know if any of you know of how to patent ideas? .... I am going to patent my roto-charger before I give out any of it secrets and making it work .... If I get started on the patent now there won't be any delays on the pictures when I get the car back ... But I am not going to post nothing till I am positive nobody can copy this ingenius setup.
----------
Just wanted to know if any of you know of how to patent ideas? .... I am going to patent my roto-charger before I give out any of it secrets and making it work .... If I get started on the patent now there won't be any delays on the pictures when I get the car back ... But I am not going to post nothing till I am positive nobody can copy this ingenius setup.
Last edited by Jproz1167; 12-03-2007 at 12:45 AM. Reason: Automerged Doublepost
#154
Senior Member
iTrader: (2)
Join Date: Apr 2003
Location: Lombard Il
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Formula
Engine: 383 vortec tpi
Transmission: t56 woot
Re: Kaiser Roto-charger on my Trans Am
Jproz quite simply put your an idiot period your actions are childish, and there is absolutly no proof in this thread to back up your claims. You have provided no pictures of your setup for one (for god sake you turned down free money to post them too) for two you claimed to have piced it together with dryer vent and home depot parts.
These things I could easily overlook however you have provided no technical data on the blower to prove that it can even flow enough air to do what you claim it does.
In short please stop making the whole site suffer this adventure through your retarded fantasy land.
These things I could easily overlook however you have provided no technical data on the blower to prove that it can even flow enough air to do what you claim it does.
In short please stop making the whole site suffer this adventure through your retarded fantasy land.
#156
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: California
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Trans Am & 1982 Corvette
Engine: L-98 with LO-3 induction. 350 CFI
Transmission: 5 speed and vette has 700r4
Axle/Gears: 373's in T/A .. vette unknown
Re: Kaiser Roto-charger on my Trans Am
Jproz quite simply put your an idiot period your actions are childish, and there is absolutly no proof in this thread to back up your claims. You have provided no pictures of your setup for one (for god sake you turned down free money to post them too) for two you claimed to have piced it together with dryer vent and home depot parts.
These things I could easily overlook however you have provided no technical data on the blower to prove that it can even flow enough air to do what you claim it does.
In short please stop making the whole site suffer this adventure through your retarded fantasy land.
These things I could easily overlook however you have provided no technical data on the blower to prove that it can even flow enough air to do what you claim it does.
In short please stop making the whole site suffer this adventure through your retarded fantasy land.
If you don't like my idea and the fact I made it work feel free not to respond. The car beats my friends corvette when it couldn't before ... So how can you say it isn't doing something! Do you think all inventions and ideas were perfectly thought out? Sure my roto-charger has serious problematic areas but I am working on better the concept and making it reliable.
And in my defence I bought the stuff at LOWES
#157
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: California
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Trans Am & 1982 Corvette
Engine: L-98 with LO-3 induction. 350 CFI
Transmission: 5 speed and vette has 700r4
Axle/Gears: 373's in T/A .. vette unknown
Re: Kaiser Roto-charger on my Trans Am
i think we should make a pilgrimage to behold this mighty accomplishment, put an image of his contraption on the back of $5 bills. maybe even erect a monument or give him a holiday to his credit... cause this line of shzit if far better and entertaining than what weve been subjected to for past almost 8 yrs.
i tell you what master of masters, pioneer of mythical power adders, king of fecal literature, rival to the gods!
I! will start the revolution to dawn your accomplishments in the light of TRUTH!...
after i have lunch with sasquatch and santa tommorw.
i tell you what master of masters, pioneer of mythical power adders, king of fecal literature, rival to the gods!
I! will start the revolution to dawn your accomplishments in the light of TRUTH!...
after i have lunch with sasquatch and santa tommorw.
----------
But hey answer one question ... has bigfoot ever seen the lochness monster .... the world is dying to know if Nessy is real!
----------
Oh now this I like it's praise and worship that pushes me to excel above the rest ... Maybe I should run for president now ... I see I have one vote for sure!
----------
But hey answer one question ... has bigfoot ever seen the lochness monster .... the world is dying to know if Nessy is real!
----------
But hey answer one question ... has bigfoot ever seen the lochness monster .... the world is dying to know if Nessy is real!
Last edited by Jproz1167; 12-03-2007 at 02:29 AM. Reason: Automerged Doublepost
#158
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: California
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Trans Am & 1982 Corvette
Engine: L-98 with LO-3 induction. 350 CFI
Transmission: 5 speed and vette has 700r4
Axle/Gears: 373's in T/A .. vette unknown
Re: Kaiser Roto-charger on my Trans Am
Oh now this I like it's praise and worship that pushes me to excel above the rest ... Maybe I should run for president now ... I see I have one vote for sure!
----------
But hey answer one question ... has bigfoot ever seen the lochness monster .... the world is dying to know if Nessy is real!
----------
Be sure to ask at lunch OK ... Tabloids will make you a rich man for this answer!
----------
But hey answer one question ... has bigfoot ever seen the lochness monster .... the world is dying to know if Nessy is real!
----------
Be sure to ask at lunch OK ... Tabloids will make you a rich man for this answer!
#160
Member
Join Date: Nov 2007
Location: Elverta, California
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Z28 Camaro
Engine: TPI 350
Transmission: TH350
Axle/Gears: 3.73 10 bolt
Re: Kaiser Roto-charger on my Trans Am
Guys i think this guy has lost his mind. He continues to post pics of his TP intake. I think his camra thinks he is stupid to. That must be one reason to not have pics. I think he is mentaly challenged.
#161
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: California
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Trans Am & 1982 Corvette
Engine: L-98 with LO-3 induction. 350 CFI
Transmission: 5 speed and vette has 700r4
Axle/Gears: 373's in T/A .. vette unknown
Re: Kaiser Roto-charger on my Trans Am
----------
----------
My best friend did this in shame as his vette was beat ....
Last edited by Jproz1167; 12-03-2007 at 11:23 AM. Reason: Automerged Doublepost
#163
Junior Member
iTrader: (1)
Join Date: Feb 2007
Location: South Fl
Posts: 88
Received 0 Likes
on
0 Posts
Car: 86 Camaro Sport Coupe
Engine: 377 sbc
Transmission: WC T-5
Axle/Gears: 3:70 Ford 9" Rear
Re: Kaiser Roto-charger on my Trans Am
would someone please put a punch in this guys mancard.. anyone who talks this much crap is definately not a man anymore.. and apparently is trying to make up for a shortcomming somewhere in his life... now with that said... i must admit.... THIS WAS A DAMN FUNNY READ!!!!!
#164
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: California
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Trans Am & 1982 Corvette
Engine: L-98 with LO-3 induction. 350 CFI
Transmission: 5 speed and vette has 700r4
Axle/Gears: 373's in T/A .. vette unknown
Re: Kaiser Roto-charger on my Trans Am
Later today I am going to go and buy some aluminum sheet and start making a custom plenum type neck to mate to my stock throttlebody. I figure this is a step in the right direction to keep from losing boost to leaks .... I am also going to look at better chains as well as alternate drive systems to power this monster without it breaking a damaging my car again.
I found a place that has 4 inch pipe that I can buy and make the intake system nice ... Decided to try silicone hose this time. A bad part about this kaiser is all the fittings on the roto-charger are bolted together type fittings which makes it hard to fab anything without making flanges and having them milled so they are straight and dont leak. RTV didn't do well to seal this problem.
I don't understand why you think this is so hard to accomplish. Making it run was the easy part ... Making durable has been a challenge, yet none of you offer much advice only bash my concept when none have you have even had the ability to try something out of the ordinary to get performance cheaply.
I found a place that has 4 inch pipe that I can buy and make the intake system nice ... Decided to try silicone hose this time. A bad part about this kaiser is all the fittings on the roto-charger are bolted together type fittings which makes it hard to fab anything without making flanges and having them milled so they are straight and dont leak. RTV didn't do well to seal this problem.
I don't understand why you think this is so hard to accomplish. Making it run was the easy part ... Making durable has been a challenge, yet none of you offer much advice only bash my concept when none have you have even had the ability to try something out of the ordinary to get performance cheaply.
#165
Supreme Member
Join Date: Jan 2004
Location: Western Ky
Posts: 1,206
Likes: 0
Received 3 Likes
on
3 Posts
Car: Z/28..39 Plymouth truck in progress
Engine: S/B
Transmission: Manual
Re: Kaiser Roto-charger on my Trans Am
Since you like to play games, puzzle me this.........you posted this the day after posting pics of the polished intake:
Yet according to the dates on the polished intake picture and this picture (by the way for such a smart guy you really need to put the current date in your camera) you took this picture of your TA in your driveway the same day you made this post saying it was still in the shop
#166
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: California
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Trans Am & 1982 Corvette
Engine: L-98 with LO-3 induction. 350 CFI
Transmission: 5 speed and vette has 700r4
Axle/Gears: 373's in T/A .. vette unknown
Re: Kaiser Roto-charger on my Trans Am
ummm the date never stays correct ... I'm tired of changing it is all ..... And that picture was taken long ago ... it's probably like 3 months old now cause it was taken even before a bigbear cruise that I met a bunch of 3gen people from this site at. So don't rely on camera dates ....
#167
Supreme Member
Join Date: Jan 2004
Location: Western Ky
Posts: 1,206
Likes: 0
Received 3 Likes
on
3 Posts
Car: Z/28..39 Plymouth truck in progress
Engine: S/B
Transmission: Manual
Re: Kaiser Roto-charger on my Trans Am
I see.....the fact that the date on the picture of your car sitting in your driveway 1 day after the date on the picture with the hand written message to Sonix is just a fluke
#168
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: California
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Trans Am & 1982 Corvette
Engine: L-98 with LO-3 induction. 350 CFI
Transmission: 5 speed and vette has 700r4
Axle/Gears: 373's in T/A .. vette unknown
Re: Kaiser Roto-charger on my Trans Am
ummm the date never stays correct ... I'm tired of changing it is all ..... And that picture was taken long ago ... it's probably like 3 months old now cause it was taken even before a bigbear cruise that I met a bunch of 3gen people from this site at. So don't rely on camera dates ....
----------
So what are you going to say next ... that I don't own that Tran Am as well?
----------
here you go .... Notice same picture ..... take note of the thread date!!!!
https://www.thirdgen.org/forums/auto...ull-wheel.html
Last edited by Jproz1167; 12-03-2007 at 12:33 PM. Reason: Automerged Doublepost
#169
Supreme Member
Join Date: Jan 2004
Location: Western Ky
Posts: 1,206
Likes: 0
Received 3 Likes
on
3 Posts
Car: Z/28..39 Plymouth truck in progress
Engine: S/B
Transmission: Manual
Re: Kaiser Roto-charger on my Trans Am
Not at all......just seems like you are spending much more effort avoiding any true intrest in your project than just going and snapping a few pics, since your are the one that started this in the first place
Last edited by flrtin1; 12-03-2007 at 01:07 PM.
#170
Member
Join Date: Dec 2002
Location: Brooklyn, MI
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 355
Transmission: 700-R4
Axle/Gears: 4.10
Re: Kaiser Roto-charger on my Trans Am
-If you have a technical question, post it. We'll help you.
-If you have pictures, post them, we'll congratulate you.
-If you going to keep lying to us for whatever reason you started to, get off our board.
Simple as that.
-If you have pictures, post them, we'll congratulate you.
-If you going to keep lying to us for whatever reason you started to, get off our board.
Simple as that.
#171
Supreme Member
Join Date: Oct 1999
Location: Davison / Troy ,Michigan
Posts: 2,977
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Pontiac Firebird
Engine: 3.8
Transmission: 700r4
Axle/Gears: Dana 60
Re: Kaiser Roto-charger on my Trans Am
LoL, only a thirdgen owner would think of something like this.
#172
Senior Member
Join Date: Jun 2003
Location: Acworth/Marietta, GA
Posts: 749
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 IROC
Engine: 350 TPI
Transmission: Pro 5.0 shifted T56
Axle/Gears: 10 bolt 3.73 posi
Re: Kaiser Roto-charger on my Trans Am
Jproz, just give it up man. Its over. Nobody here believes you and this whole thing has gone way to far for you to ever regain any credibility on this site again. The idea seemed very improbable to begin with and when we asked for pics we got 4 pages of .
Youre a senior member here with almost 1800 posts and nearly 5 years of membership. You of all people should know the nature of this site and how skeptical people are of anything without a picture. You have a camera, and you clearly know how to post pics. If you cared at all about your reputation here you would have taken the 3 minutes to snap a picture and post it up. All it would take is 1 picture that would shut EVERYBODY up. Im not trying to attack you, im just trying to make you realize how your posts are percieved by everyone else. Dont you understand why everyone is railing on you for this? At the very least, stop posting about this imaginary contraption because its just wasting our time and TGO's bandwidth.
StreetRoc out.........
Youre a senior member here with almost 1800 posts and nearly 5 years of membership. You of all people should know the nature of this site and how skeptical people are of anything without a picture. You have a camera, and you clearly know how to post pics. If you cared at all about your reputation here you would have taken the 3 minutes to snap a picture and post it up. All it would take is 1 picture that would shut EVERYBODY up. Im not trying to attack you, im just trying to make you realize how your posts are percieved by everyone else. Dont you understand why everyone is railing on you for this? At the very least, stop posting about this imaginary contraption because its just wasting our time and TGO's bandwidth.
StreetRoc out.........
#173
Member
iTrader: (2)
Join Date: Oct 2007
Location: Tomball,TX
Posts: 136
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 TA
Engine: 305, 5.0
Transmission: T5
Re: Kaiser Roto-charger on my Trans Am
If I posess the abilities to turn my corvette into a convertibe and a factory looking one, why would it be so hard for me to make a bracket and weld sprockets on something? ..... Seeing is believing yes but just cause you've never seen it doesn't mean it doesn't exist now does it!
Last edited by Jassack; 12-03-2007 at 02:00 PM.
#174
Supreme Member
Join Date: May 2006
Location: Maui, Hawaii
Posts: 1,857
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Trans Am
Engine: broken 385sbc
Transmission: G-Force rebuilt T-5
Axle/Gears: Currie 9" Ford 4.30:1
#175
Senior Member
iTrader: (2)
Join Date: Apr 2003
Location: Lombard Il
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Formula
Engine: 383 vortec tpi
Transmission: t56 woot
Re: Kaiser Roto-charger on my Trans Am
A vacuum gage that reads boost is a hybrid vacuum/boost gage just if it was a vacuum gage it would read just vacuum if it reads boost at all its a boost gage
How hard is this to understand
----------
I'm not saying that you didn't make it work I'm not saying that you can't make it work all I'm saying is
IF A TREE FALLS IN THE FOREST AND NOBODY HEARS IT DOES IT REALLY MAKE A SOUND
offer up one shred of proof that you have done what you say you have and everybody will leave you alone until then stop blowing smoke up our collective asses
How hard is this to understand
----------
If you don't like my idea and the fact I made it work feel free not to respond. The car beats my friends corvette when it couldn't before ... So how can you say it isn't doing something! Do you think all inventions and ideas were perfectly thought out? Sure my roto-charger has serious problematic areas but I am working on better the concept and making it reliable.
And in my defence I bought the stuff at LOWES
And in my defence I bought the stuff at LOWES
IF A TREE FALLS IN THE FOREST AND NOBODY HEARS IT DOES IT REALLY MAKE A SOUND
offer up one shred of proof that you have done what you say you have and everybody will leave you alone until then stop blowing smoke up our collective asses
Last edited by formula350sd; 12-03-2007 at 05:57 PM. Reason: Automerged Doublepost
#176
Supreme Member
Join Date: Aug 2001
Location: Caldwell,ID
Posts: 5,388
Likes: 0
Received 2 Likes
on
2 Posts
Car: 2005 BMW 545i
Engine: 4.4L N62B44
Transmission: 6spd auto
Axle/Gears: Rotating
Re: Kaiser Roto-charger on my Trans Am
but I'm lazy and would rather not type "hybrid vacuume and boost detecting gauge." too much work. most people seem understand vacuum gauge just as a catch all be it reading boost or vacuum, rather then just argue the techincal details
and hey come on leave me alone we all already have one person to pick on in this thread we don't need to add me also to this.
#177
Senior Member
iTrader: (2)
Join Date: Apr 2003
Location: Lombard Il
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Formula
Engine: 383 vortec tpi
Transmission: t56 woot
Re: Kaiser Roto-charger on my Trans Am
it's not hard to understand you don't have to be rude about it though
but I'm lazy and would rather not type "hybrid vacuume and boost detecting gauge." too much work. most people seem understand vacuum gauge just as a catch all be it reading boost or vacuum, rather then just argue the techincal details
and hey come on leave me alone we all already have one person to pick on in this thread we don't need to add me also to this.
but I'm lazy and would rather not type "hybrid vacuume and boost detecting gauge." too much work. most people seem understand vacuum gauge just as a catch all be it reading boost or vacuum, rather then just argue the techincal details
and hey come on leave me alone we all already have one person to pick on in this thread we don't need to add me also to this.
I just felt the need to point out that a vacuum gage wont read boost cause it reads vacuum and some other guy gave me a smart answer so I cracked back at em and then you happened to step into the line of fire it happens
I dont try to be mean but its very frustrating that people cant understand this simple concept and call **** by its right name if your reading boost its a boost gage DUH
#178
Junior Member
Join Date: Aug 2006
Location: tennessee
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc z
Engine: tpi
Transmission: 700r4
Axle/Gears: 3.23
Re: Kaiser Roto-charger on my Trans Am
your gonna kill somebody, if you really want to do something stupid like that put a damn belt on there with a tensioner and a pulley. im serious man your gonna mess yourself up with that crap, that is unless this is all in your imagination
#179
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: California
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Trans Am & 1982 Corvette
Engine: L-98 with LO-3 induction. 350 CFI
Transmission: 5 speed and vette has 700r4
Axle/Gears: 373's in T/A .. vette unknown
Re: Kaiser Roto-charger on my Trans Am
who is everyone picking on or you should ask is one picking on everyone ..... believe it or not I've enjoyed myself through this thread ...
----------
You think I'm insane enough to open the hood while this thing is running .... Give me some credit LOL worse thing that could happen is it falls on the road thats all.
----------
You think I'm insane enough to open the hood while this thing is running .... Give me some credit LOL worse thing that could happen is it falls on the road thats all.
Last edited by Jproz1167; 12-03-2007 at 07:23 PM. Reason: Automerged Doublepost
#180
Junior Member
Join Date: Aug 2006
Location: tennessee
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc z
Engine: tpi
Transmission: 700r4
Axle/Gears: 3.23
Re: Kaiser Roto-charger on my Trans Am
dude spin that thing a 5 grand whether the hood is open or not that thing is gonna go where ever it wants just do it the right way get some v band clamps for the intake and get a belt that would be the most logical thing to do for your own safety and for those around you
#181
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: California
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Trans Am & 1982 Corvette
Engine: L-98 with LO-3 induction. 350 CFI
Transmission: 5 speed and vette has 700r4
Axle/Gears: 373's in T/A .. vette unknown
Re: Kaiser Roto-charger on my Trans Am
The bicycle chain might have but this new chain wont. if a cr450r cant break it then no way will the drag of the kaiser ... Well, I guess the kaiser could lock up and then the chain would trash everything even worse ... but hey, thats what being a inventor is about right?
----------
isn't no way to do a belt anyways. Besides I can always put a motorcycle chain gaurd on it for a little extra safety.
----------
dude spin that thing a 5 grand whether the hood is open or not that thing is gonna go where ever it wants just do it the right way get some v band clamps for the intake and get a belt that would be the most logical thing to do for your own safety and for those around you
Last edited by Jproz1167; 12-03-2007 at 07:41 PM. Reason: Automerged Doublepost
#182
Junior Member
Join Date: Aug 2006
Location: tennessee
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc z
Engine: tpi
Transmission: 700r4
Axle/Gears: 3.23
Re: Kaiser Roto-charger on my Trans Am
true but if that sproket is off center than its just a matter of time before something fails look dude a belt would put a lot less stress on PS pump and the SC besides when have you ever see a chain under the hood of any car its this way for a reason just think about it and be glad you dont have a FWD car if that thing does come loose
#183
Supreme Member
iTrader: (1)
Join Date: Mar 2005
Location: Western PA
Posts: 1,089
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro
Engine: 3.1/3100 in progress...Turbo Soon
Transmission: 700r4
Re: Kaiser Roto-charger on my Trans Am
Id have to agree that using a chain would be a very bad idea. You say your not going to open the hood while its running...good. But what if it breaks and goes down? That thing could shoot out the bottom of the car a take someones leg off. Slim chance...but still a chance. That would be a fun time trying to get out of that lawsuit
Plus Im willing to bet that if you broke a motorcycle chain at high RPMs that it would go through your hood.
Plus Im willing to bet that if you broke a motorcycle chain at high RPMs that it would go through your hood.
Last edited by grimmcs; 12-03-2007 at 07:55 PM.
#184
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: California
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Trans Am & 1982 Corvette
Engine: L-98 with LO-3 induction. 350 CFI
Transmission: 5 speed and vette has 700r4
Axle/Gears: 373's in T/A .. vette unknown
Re: Kaiser Roto-charger on my Trans Am
Id have to agree that using a chain would be a very bad idea. You say your not going to open the hood while its running...good. But what if it breaks and goes down? That thing could shoot out the bottom of the car a take someones leg off. Slim chance...but still a chance. That would be a fun time trying to get out of that lawsuit
#187
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: California
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Trans Am & 1982 Corvette
Engine: L-98 with LO-3 induction. 350 CFI
Transmission: 5 speed and vette has 700r4
Axle/Gears: 373's in T/A .. vette unknown
Re: Kaiser Roto-charger on my Trans Am
#188
Supreme Member
iTrader: (1)
Join Date: Mar 2005
Location: Western PA
Posts: 1,089
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro
Engine: 3.1/3100 in progress...Turbo Soon
Transmission: 700r4
Re: Kaiser Roto-charger on my Trans Am
#189
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: California
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Trans Am & 1982 Corvette
Engine: L-98 with LO-3 induction. 350 CFI
Transmission: 5 speed and vette has 700r4
Axle/Gears: 373's in T/A .. vette unknown
Re: Kaiser Roto-charger on my Trans Am
I did get an interesting message asking what episode of tooltime "Tim" tried this on ... that was funny but sorry I came up with this idea on my own free will.
----------
The flexible stuff is metal.
----------
The flexible stuff is metal.
Last edited by Jproz1167; 12-03-2007 at 08:09 PM. Reason: Automerged Doublepost
#190
Supreme Member
iTrader: (15)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,666
Likes: 0
Received 50 Likes
on
48 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: Kaiser Roto-charger on my Trans Am
it may be metal, aluminum actually, yet it has almost NO strength, you can pull it apart with your hands, heck, if you shake it hard enought it will break. PVC pipe is stronger, especially when glued, the pressure pvc is good for a several hundred+ PSI, and even the DWV solidcord, not cellcore, is good for a couple hundred psi. You are soo full of crap its not even funny anymore. 130$ for a proof pic would have gotten me of my behind, even if i was going to patent my awesome design
#191
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: California
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Trans Am & 1982 Corvette
Engine: L-98 with LO-3 induction. 350 CFI
Transmission: 5 speed and vette has 700r4
Axle/Gears: 373's in T/A .. vette unknown
Re: Kaiser Roto-charger on my Trans Am
it may be metal, aluminum actually, yet it has almost NO strength, you can pull it apart with your hands, heck, if you shake it hard enought it will break. PVC pipe is stronger, especially when glued, the pressure pvc is good for a several hundred+ PSI, and even the DWV solidcord, not cellcore, is good for a couple hundred psi. You are soo full of crap its not even funny anymore. 130$ for a proof pic would have gotten me of my behind, even if i was going to patent my awesome design
#192
Member
Join Date: Nov 2007
Location: Elverta, California
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Z28 Camaro
Engine: TPI 350
Transmission: TH350
Axle/Gears: 3.73 10 bolt
Re: Kaiser Roto-charger on my Trans Am
Hey have you lost your mind. I know for sure every one knows that for a fact. Letts just say that this contraption some how works. What if the SC blows. all the **** in the SC will get sucked into the engine like the Home Dpot pvc pipe the mettal. What ever man this is insaine. I think your trans am thinks your out of your mind as well as every one else. Like some one else said. That thing could go through the hood and kill some one. I think there is a prob with your head. every one thinks your an idiot. I will personally drive to your house and shake your hand and hand you 500 bucks cash if you post pics. They have to be you in every one and full detail pics. no blurry ****.
#194
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: California
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Trans Am & 1982 Corvette
Engine: L-98 with LO-3 induction. 350 CFI
Transmission: 5 speed and vette has 700r4
Axle/Gears: 373's in T/A .. vette unknown
Re: Kaiser Roto-charger on my Trans Am
----------
wonder who will be the 200th post?
Last edited by Jproz1167; 12-03-2007 at 09:36 PM. Reason: Automerged Doublepost
#196
Member
Join Date: Nov 2007
Location: Elverta, California
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Z28 Camaro
Engine: TPI 350
Transmission: TH350
Axle/Gears: 3.73 10 bolt
Re: Kaiser Roto-charger on my Trans Am
Dood just honestly answer this one. Why did you really post this.
----------
[quote=travishenry;3553836]Dood just honestly answer this one. Why did you really post this Thread????? That 500 dollar offer still stands.
----------
[quote=travishenry;3553836]Dood just honestly answer this one. Why did you really post this Thread????? That 500 dollar offer still stands.
Last edited by travishenry; 12-03-2007 at 09:40 PM. Reason: Automerged Doublepost
#197
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: California
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Trans Am & 1982 Corvette
Engine: L-98 with LO-3 induction. 350 CFI
Transmission: 5 speed and vette has 700r4
Axle/Gears: 373's in T/A .. vette unknown
Re: Kaiser Roto-charger on my Trans Am
Nah thats crazy Jim
----------
[QUOTE=travishenry;3553836]Dood just honestly answer this one. Why did you really post this.
----------
When me and Oloff were shooting the breeze he told me about it so I just had to see it ... well, like all other insane people I took it a step further. Besides I've tried way worse ideas then this one.
----------
[QUOTE=travishenry;3553836]Dood just honestly answer this one. Why did you really post this.
----------
When me and Oloff were shooting the breeze he told me about it so I just had to see it ... well, like all other insane people I took it a step further. Besides I've tried way worse ideas then this one.
Last edited by Jproz1167; 12-03-2007 at 09:47 PM. Reason: Automerged Doublepost
#199
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: California
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Trans Am & 1982 Corvette
Engine: L-98 with LO-3 induction. 350 CFI
Transmission: 5 speed and vette has 700r4
Axle/Gears: 373's in T/A .. vette unknown
Re: Kaiser Roto-charger on my Trans Am
I honestly don't think any of you care about the rotocharger ... I think you really want to just see the chain spinning.