What is the ATI P600B Air Pressure Ratio
09-03-2001, 04:12 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2001
Location: Dallas, TX
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
What is the ATI P600B Air Pressure Ratio
I am using DesktopDyno2000. I am trying to simulate power with forced induction. Has anyone done this type of power projection and what were the results?
They list the following variables:
Pressure Ratio (Ambient to Forced)
Boost Limit (Max Boost before Blow off)
Speed (Impeler RPM)
Belt Gear Ratio
Surge Flow (Turbos only)
Blower efficeincy
Internal Gear Ratio (3.05to1 P600B)
Intercooler (50% Air to ducted air)
Can anyone shed some light on these inputs. I am using Pressure Ratio--Know Idea
Max Boost before BlowOff--15psi
Impellar speed 45000RPM 8lb pulley
Belt Gear Ratio 1 to 1
Surge Flow N/A
Blower Efficeincy 75%
Internal Gear Ratio 3.05 to 1
Intercooler efficeincy 50%
Am I way off or in the ball park
Thanks for any help
t2k
They list the following variables:
Pressure Ratio (Ambient to Forced)
Boost Limit (Max Boost before Blow off)
Speed (Impeler RPM)
Belt Gear Ratio
Surge Flow (Turbos only)
Blower efficeincy
Internal Gear Ratio (3.05to1 P600B)
Intercooler (50% Air to ducted air)
Can anyone shed some light on these inputs. I am using Pressure Ratio--Know Idea
Max Boost before BlowOff--15psi
Impellar speed 45000RPM 8lb pulley
Belt Gear Ratio 1 to 1
Surge Flow N/A
Blower Efficeincy 75%
Internal Gear Ratio 3.05 to 1
Intercooler efficeincy 50%
Am I way off or in the ball park
Thanks for any help
t2k
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
