good quality boost tubing?
#1
Senior Member
Thread Starter
Join Date: Sep 1999
Location: Emmaus, Pa
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro IROC Z28
Engine: 355
Transmission: 1994 T56
Axle/Gears: BW 3.27 (stock)
good quality boost tubing?
the tubing is falling apart that i got with my paxton. I'm looking to ditch it all and get some nice tubing that preferably won't pop off on me.
Are there any companies who sell nice boost tubing?
Are there any companies who sell nice boost tubing?
#2
Supreme Member
Join Date: Jul 1999
Location: Indianapolis, IN
Posts: 1,827
Likes: 0
Received 1 Like
on
1 Post
Car: 2000 Trans Am
Engine: LS1
Transmission: T56
Damn all you have had is problems with that paxton kit!
Boost tubing. Do you mean between the blower and the engine or between the air filter and the blower?
------------------
-86 IROC
S-Trim, Speed Pro, AFR
this years goal: 10.50 @ 130+ mph
-=ICON Motorsports=-
Boost tubing. Do you mean between the blower and the engine or between the air filter and the blower?
------------------
-86 IROC
S-Trim, Speed Pro, AFR
this years goal: 10.50 @ 130+ mph
-=ICON Motorsports=-
#3
Senior Member
Thread Starter
Join Date: Sep 1999
Location: Emmaus, Pa
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro IROC Z28
Engine: 355
Transmission: 1994 T56
Axle/Gears: BW 3.27 (stock)
<font face="Verdana, Arial" size="2">Originally posted by Guido:
Damn all you have had is problems with that paxton kit!
Boost tubing. Do you mean between the blower and the engine or between the air filter and the blower?
</font>
Damn all you have had is problems with that paxton kit!
Boost tubing. Do you mean between the blower and the engine or between the air filter and the blower?
</font>
actually i mean couplers. The rubber oval piece that join the metal u to the throttle body, and the rubber cylinder that joins the first u to the second. The ones that you hose clamp down.
#4
Member
Join Date: Jul 2000
Location: St. Charles, IL USA
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
I sell many shapes, sizes, colors, and types of both silicone and nitrile hose couplers. I also sell bad-*** 3/4" stainless t-clamps. Many pieces for any budget. You can call me at work to get pricing and to place an order.
Dan 630-801-1417 ext.2
Dan 630-801-1417 ext.2
#5
Senior Member
Join Date: Nov 2000
Location: Charleston, WV, USA
Posts: 727
Likes: 0
Received 1 Like
on
1 Post
Car: '86 IROC-Z + Misc. project cars.
Engine: Supercharged + Nitrous TPI 355 CID
Transmission: Art Carr built Th700r4
GMI has the ticket. My stuff was always blowing apart until I bought new hose and T bolt clamps. It hasn't blown off since.
https://www.thirdgen.org/messgboard/...ML/000521.html
------------------
Tracy /AKA IROCKZ4me
'86 IROC-Z Camaro
"Cogito ergo zoom"
[This message has been edited by IROCKZ4me (edited June 12, 2001).]
https://www.thirdgen.org/messgboard/...ML/000521.html
------------------
Tracy /AKA IROCKZ4me
'86 IROC-Z Camaro
"Cogito ergo zoom"
- 355 cid
- AFR heads
- Arizona Speed & Marine hydraulic roller cam w/ AFR hydra-rev kit
- modified SLP runners
- TRW forged pistons/ceramic coated
- fully balanced
- Edelbrock headers/ceramic coated
- SLP cat-back
- Paxton supercharger
- Nitrous Express nitrous oxide
[This message has been edited by IROCKZ4me (edited June 12, 2001).]
#6
Member
Join Date: Feb 2001
Location: san antonio tx usa
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84z28
Engine: chevy 388
Transmission: 700r4
i was going to ask what tbolt clamps were
tell i realised i have them allready
you can see them on my motor at:
http://darcom.home.texas.net/
------------------
388 SuperRam, DFI, Vortech R trim ,N.O.S.,alki injection,
Dart sportmansII heads,50 pound injectors, Headman full headers
duel 3' exhaust,and Flowmasters, Ford nine inch with 370's
Ronal rims with Nitto drad raidals.
tell i realised i have them allready
you can see them on my motor at:
http://darcom.home.texas.net/
------------------
388 SuperRam, DFI, Vortech R trim ,N.O.S.,alki injection,
Dart sportmansII heads,50 pound injectors, Headman full headers
duel 3' exhaust,and Flowmasters, Ford nine inch with 370's
Ronal rims with Nitto drad raidals.
#7
Senior Member
Thread Starter
Join Date: Sep 1999
Location: Emmaus, Pa
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro IROC Z28
Engine: 355
Transmission: 1994 T56
Axle/Gears: BW 3.27 (stock)
GMI Fast, i'll call you to order, but the problem is, i don't know exactly what i need to order, sizewise.
http://www.poorformance.net/iroc/enginebay.jpg
i need the rubber tubing/coupling for both ends of the big paxton elbow, and also the one from the little elbow to the blower itself. Does anyone have the sizes of this stuff available, or do i need to go measure it out?
I'd like like to get the t-clamps as well.
Thanks everyone.
http://www.poorformance.net/iroc/enginebay.jpg
i need the rubber tubing/coupling for both ends of the big paxton elbow, and also the one from the little elbow to the blower itself. Does anyone have the sizes of this stuff available, or do i need to go measure it out?
I'd like like to get the t-clamps as well.
Thanks everyone.
Trending Topics
#9
Senior Member
Thread Starter
Join Date: Sep 1999
Location: Emmaus, Pa
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro IROC Z28
Engine: 355
Transmission: 1994 T56
Axle/Gears: BW 3.27 (stock)
<font face="Verdana, Arial" size="2">Originally posted by Guido:
Measure the inside diameter of the pieces you need. </font>
Measure the inside diameter of the pieces you need. </font>
i will, just have to wait until friday....the car is at my parents house up on ramps
Thread
Thread Starter
Forum
Replies
Last Post
toronto formula
Engine/Drivetrain/Suspension Parts for Sale
15
11-10-2015 06:17 AM
Linson
Auto Detailing and Appearance
40
08-21-2015 02:12 PM
Street Lethal
Engine/Drivetrain/Suspension Parts for Sale
0
08-12-2015 11:33 AM