Best spot to mount a nitrous bottle?
#1
Thread Starter
Senior Member
Joined: Mar 2002
Posts: 522
Likes: 9
From: Syracuse, Utah
Engine: None
Transmission: None
Best spot to mount a nitrous bottle?
Hopefully next paycheck I can finally buy a kit. Anyone here have pics of where they mounted their bottles? I'm getting the Edelbrock kit for my holley setup. anyone used this one? Any info or pics would be appreciated. Thanks
#5
TGO Supporter
Joined: Jul 2001
Posts: 4,991
Likes: 1
From: Cheyenne, Wyoming
Car: 1992 B4C 1LE
Engine: Proaction 412, Accel singleplane
Transmission: built 700R4 w/custom converter
Axle/Gears: stock w/later 4th gen torsen pos
this post needs to decide: schlage or master? repeat posts need a lock.
Trending Topics
#9
Senior Member
Joined: Apr 2002
Posts: 531
Likes: 0
From: Northern New Jersey
Car: 91 Firebird Formula
Engine: For me to know.....
Transmission: and you to find out....
isnt there ANY other spot to put the bottle other than the wheel well? I saw one guy had a post saying you could put the
bottle(s) underneath the rear seats and fold the rear seats down to "hide" the bottles. Im assuming he meant cut the bottom of the seats out and then fold the top part down. I still would like to THINK that you can fab the bottle(s) into the rear seats somehow...what do you guys think???
B4Ctom1~ I dont wanna start an arguement with you but I did a good amount of searching (a couple days ago) on TGO for Nitrous info and I didnt find a whole lot of info. (overall) I searched through the power adder forum and body and interior. I used the words "Nos" and "Nitrous." Like I said before I didnt come up with a lot of info. Not to tell a moderator how to do his/her job but I think if there was a "sticky" for FAQ's about nitrous there wouldnt be repeat questions. If there are a lot about of threads about nitrous (where to put the bottle ect ect) then in all seriousness I must not know how to search for info here.... Just my .02
Dan
bottle(s) underneath the rear seats and fold the rear seats down to "hide" the bottles. Im assuming he meant cut the bottom of the seats out and then fold the top part down. I still would like to THINK that you can fab the bottle(s) into the rear seats somehow...what do you guys think???
B4Ctom1~ I dont wanna start an arguement with you but I did a good amount of searching (a couple days ago) on TGO for Nitrous info and I didnt find a whole lot of info. (overall) I searched through the power adder forum and body and interior. I used the words "Nos" and "Nitrous." Like I said before I didnt come up with a lot of info. Not to tell a moderator how to do his/her job but I think if there was a "sticky" for FAQ's about nitrous there wouldnt be repeat questions. If there are a lot about of threads about nitrous (where to put the bottle ect ect) then in all seriousness I must not know how to search for info here.... Just my .02
Dan
#10
TGO Supporter
Joined: Jul 2001
Posts: 4,991
Likes: 1
From: Cheyenne, Wyoming
Car: 1992 B4C 1LE
Engine: Proaction 412, Accel singleplane
Transmission: built 700R4 w/custom converter
Axle/Gears: stock w/later 4th gen torsen pos
no problem here is one I just did using "bottle AND mount" in the keyword field and I narrowed it by only looking in the "power adder" section...
#11
TGO Supporter
Joined: Jul 1999
Posts: 3,838
Likes: 4
From: Another world, some other time
Car: 86 LG4 & 92 TBI Firebird
Engine: The Mighty 305!
Transmission: 700R4
Axle/Gears: 3.42
Re: Best spot to mount a nitrous bottle?
Originally posted by 89FRMLA350
Hopefully next paycheck I can finally buy a kit. Anyone here have pics of where they mounted their bottles? I'm getting the Edelbrock kit for my holley setup. anyone used this one? Any info or pics would be appreciated. Thanks
Hopefully next paycheck I can finally buy a kit. Anyone here have pics of where they mounted their bottles? I'm getting the Edelbrock kit for my holley setup. anyone used this one? Any info or pics would be appreciated. Thanks
#12
you can see pictures of mine throughout my page.
down in the well is nice for shows but you loose some of the practicle use since it's now working on an angle.
i like the spare tire area except for street cars, something about the thought of getting hit bothers me. i've seen people mount it right on top of the hatch area with no problems. hell just about any way you want would work.
good luck.
down in the well is nice for shows but you loose some of the practicle use since it's now working on an angle.
i like the spare tire area except for street cars, something about the thought of getting hit bothers me. i've seen people mount it right on top of the hatch area with no problems. hell just about any way you want would work.
good luck.
Thread
Thread Starter
Forum
Replies
Last Post
IROCZDAVE (88-L98)
Engine/Drivetrain/Suspension Parts for Sale
0
09-02-2015 09:49 AM