Power Adders Getting a Supercharger or Turbocharger? Thinking about using Nitrous? All forced induction and N2O topics discussed here.

Custom nitrous lines

Thread Tools
 
Search this Thread
 
Old 03-29-2003 | 02:10 PM
  #1  
bjm323's Avatar
Thread Starter
Member
 
Joined: Feb 2002
Posts: 255
Likes: 0
From: Northeast OH
Car: '91 Camaro RS
Custom nitrous lines

Does anyone know a good place to get custom high pressure hose assemblies made? No one around here wants to deal with a small order. I need 2 - 5 1/2" long -4 AN lines with a 45 deg. radius fitting on one end and a straight fitting on the other.
Old 03-29-2003 | 03:07 PM
  #2  
FSTFBDY's Avatar
Supreme Member
iTrader: (33)
 
Joined: Jul 2000
Posts: 5,945
Likes: 1
From: Boosted Land
Car: 92 Z28
Engine: Boosted LSX
why not get the fitting and do it yourself. Ive done hi psi fitting befor its not hard. Just get the right type of line and your set.

Ive done hydraulic lines and tested em to 3000psi and the fitting held good and the line didn't pop. This was rubber lines also.

Earls make pish in fittings. Dono how much psi they are rated at but might be worth looking into.
Old 03-29-2003 | 03:30 PM
  #3  
bjm323's Avatar
Thread Starter
Member
 
Joined: Feb 2002
Posts: 255
Likes: 0
From: Northeast OH
Car: '91 Camaro RS
Are there no special tools needed to assemble hi press. lines? I have done regular braided hose but nothing with teflon. How did you go about pressure testing them? Thanks for the reply

Last edited by bjm323; 03-29-2003 at 04:19 PM.
Old 03-31-2003 | 03:33 PM
  #4  
9.0L Firebird's Avatar
Member
 
Joined: Jun 2000
Posts: 157
Likes: 0
From: NY, NY
Most aeroquip dealers will build custom lines. They aren't cheap but, they will do the job no one else wants to bother with.

http://www.aeroquip.com/

Copy from Aeroquip dealer search for Ohio:

This Distributor Locator will help you find where to purchase Eaton Fluid Power products. Use the form at the right to begin your search.
Industrial and Mobile Distributors

Premier Distributors APPLIED INDUSTRIAL TECH
4754 FAIRCREST ROAD SOUTH WE
PO BOX 6239 STATION B
CANTON, OH 44706
USA
Phone: 330-484-1999
Fax: 330-484-4211
Email:

APPLIED INDUSTRIAL TECH
3600 EUCLID AVE
PO BOX 6925
VENDOR # 21054259
CLEVELAND, OH 44101
USA
Phone: 216-881-2838
Fax: 216-426-4802
Email: cbeeman@ap2-applied.com

APPLIED INDUSTRIAL TECH
3600 EUCLID AVE
PO BOX 94987
CLEVELAND, OH 44101
USA
Phone: 216-881-2838
Fax: - -
Email:

BINKELMAN BAUER-WENNER
2601 HILL AVE
TOLEDO, OH 43607
USA
Phone: 419-537-9333
Toll-free: 419-537-9333
Fax: 419-537-0041
URL: www.binkelman.com
Email: dave.grana@binkelman.com

CENTRE SUPPLY CO
2239 STATE STREET SOUTHEAST
PO BOX 608
NEW PHILDELPHIA, OH 44663
USA
Phone: 330-339-3601
Toll-free: 3303393601
Fax: 330-339-5020
Email:

CENTRE SUPPLY COMPANY
AEROQUIP EXPRESS HOSE CENTER
2239 STATE ST S E
PO BOX 608
NEW PHILADELPHIA, OH 44663
USA
Phone: 330-339-3601
Fax: 330-339-5020
Email:

F B WRIGHT COMPANY
OF CINCINNATI
4689 ASHLEY DRIVE
HAMILTON, OH 45011
USA
Phone: 513-874-9100
Fax: 513-874-0235
URL: www.hoseandgaskets.com
Email: sales@hoseandgaskets.com

F B WRIGHT COMPANY
AEROQUIP EXRPESS HOSE CENTER
9005 SUTTON PLACE
HAMILTON, OH 45011
USA
Phone: 513-874-3890
Fax: 513-874-2690
URL: www.hoseandgaskets.com
Email: sales@hoseandgaskets.com

FOURNIER RUBBER & SUPPLY CO
AEROQUIP EXPRESS HOSE CENTER
1341 NORTON AVE (43212)
PO BOX 548
COLUMBUS, OH 43216-0548
USA
Phone: 614-294-6453
Fax: 614-294-0644
URL: www.aeroquipdistributor.com/fournier
Email: near4@aol.com

GOODALL RUBBER COMPANY
100 HAYNES DR
SUITE D
CLEVELAND, OH 44131
USA
Phone: 216-398-7720
Toll-free: 800-238-8321
Fax: 800-682-2169
URL: www.aeroquipdistributor.com/goodall
Email:

GOSS SUPPLY COMPANY
620 MARIETTA STREET
PO BOX 2580
ZANESVILLE, OH 43702-0192
USA
Phone: 740-454-2571
Fax: 740-454-7344
URL: ww.gosssupply.com
Email: sales@goss-supply.com

KOEHLER RUBBER & SUPPLY CO
800 W RESOURCE DR
CLEVELAND, OH 44131
USA
Phone: 216-749-5100
Fax: 216-749-1911
Email:

KOEHLER RUBBER & SUPPLY CO
800 W RESOURCE DR
CLEVELAND, OH 44131-1835
USA
Phone: 216-749-5100
Fax: 216-749-1911
Email:

MURDOCK INDUSTRIAL
AEROQUIP EXPRESS HOSE CENTER
553 CARROLL STREET
AKRON, OH 44304
USA
Phone: 330-535-7105
Toll-free: 330-535-7105
Fax: 330-535-1125
URL: ww.murdockindustrial.com
Email: aeroquip@murdockindustrial.com

OHIO AUTOMOTIVE SUPPLY
525 W MAIN CROSS
PO BOX 209
FINDLAY, OH 45840-0209
USA
Phone: 419-422-1655
Toll-free: 419-422-1655
Fax: 419-422-9670
URL: ttp://www.ohioautomotive.com
Email: sales@ohioautomotive.com

PABCO FLUID POWER
9299 MARKETPLACE
BROADVIEW HEIGHTS, OH 44147
USA
Phone: 440-546-0333
Toll-free: 1-800-589-8352
Fax: 440-546-0335
URL: www.aeroquipdistributor.com/telcofluid-power
Email: tfpsales@telcofluidpower.com

RALPH C WILLIAMS
429 WAYNESBURGH RD SE
CANTON, OH 44707
USA
Phone: 330-452-6548
Fax: 330-452-8445
URL: www.ralphcwilliams.com
Email: rcwilliams@nci2000.net

ROBECK FLUID POWER CO
350 LENA DRIVE
AURORA, OH 44202
USA
Phone: 330-562-1140
Fax: 330-582-1141
URL: ww.robeckfluidpower.com
Email: sales@robeckfluidpower.com

S G MORRIS
699 MINER RD
HIGHLAND HEIGHTS, OH 44143
USA
Phone: 440-473-1640
Toll-free: 866-SG MORRIS
Fax: 440-473-6205
URL: WW.SGMORRIS.COM
Email: sgmmail@sgmorris.com

STERLING RUBBER PRODUCTS CO
AEROQUIP EXPRESS HOSE CENTER
3190 KETTERING BLVD S
DAYTON, OH 45439
USA
Phone: 937-298-0241
Fax: 937-298-6086
URL: www.sterlingrubber.com
Email: ryarger@sterlingrubber.com

TORQUE DRIVES INC
317 S PARK AVE
WARREN, OH 44482
USA
Phone: 330-399-1000
Toll-free: 330-399-1000
Fax: 330-394-7564
Email: tdrives1@aol.com

VOTO MANUFACTURERS SALES CO
500 N 3RD ST
PO BOX 1299
STEUBENVILLE, OH 43952
USA
Phone: 740-282-3621
Toll-free: 740-282-3621
Fax: 740-282-5441
Email: votosales@steubenville.com


Authorized Distributors APPLIED INDUSTRIAL TECH
1966 SPRUCE STREET
PO BOX 730
DEFIANCE, OH 43512-0730
USA
Phone: 419-784-4566
Fax: 419-784-3555
Email:

APPLIED INDUSTRIAL TECH
230 STANFORD PARKWAY
FINDLAY, OH 45840
USA
Phone: 419-423-4921
Fax: 419-423-2509
Email:

APPLIED INDUSTRIAL TECH
2801 SALT SPRING RD
YOUNGSTOWN, OH 44509
USA
Phone: 330-799-8790
Fax: 330-799-6485
Email:

APPLIED INDUSTRIAL TECH
6020 BENORE ROAD
TOLEDO, OH 43612
USA
Phone: 419-729-0661
Fax: 419-729-5630
Email:

ASSOCIATED SUPPLIER
715 W WASHINGTON STREET
PO BOX 1250
SANDUSKY, OH 44870
USA
Phone: 419-626-2721
Toll-free: 800-686-2721
Fax: 419-626-3083
URL: ww.associatedsuppliers.com
Email: info@associatedsuppliers.com

CENTRAL INDUSTRIAL SUPPLY
1050 EAST MAIN ST
PO BOX 267
CHILLICOTHE, OH 45601
USA
Phone: 740-773-1171
Fax: 740-773-1183
URL: www.centralind.com
Email: gcarroll@centralind.com

CENTRAL INDUSTRIAL SUPPLY
1810-11TH STREET
PO BOX 1447
PORTSMOUTH, OH 45662
USA
Phone: 740-354-3141
Fax: 740-354-3143
URL: www.centralind.com
Email: jhorsleye@centralind.com

COOPER HYDRAULIC HOSE & TUBI
259 MILAN AVENUE
NORWALK, OH 44857
USA
Phone: 419-668-8090
Fax: 419-663-6418
Email:

CORBIN CORPORATION
SOUTHLAND PARK
TIFFIN, OH 44883
USA
Phone: 419-447-0414
Fax: 419-447-0954
Email:

COSHOCTON BRAKE & SUPPLY
601 WALNUT STREET
PO BOX 665
COSHOCTON, OH 43812
USA
Phone: 740-622-0595
Fax: 740-622-7512
Email:

CROSS TRUCK EQUIPMENT CO
1801 PERRY DRIVE SW
PO BOX 80509
CANTON, OH 44708
USA
Phone: 330-477-8151
Fax: 330-477-8426
Email:

GOSS SUPPLY COMPANY
660 HARMON PLAZA
COLUMBUS, OH 43223
USA
Phone: 614-445-7128
Fax: 614-445-7301
Email:

KELLERMEYER
520 N DUNBRIDGE RD
BOWLING GREEN, OH 43402
USA
Phone: 419-354-2127
Fax: 419-354-4121
Email:

LORENZ EQUIPMENT COMPANY
547 WEST RICH STREET
PO BOX 1238
COLUMBUS, OH 43216
USA
Phone: 614-228-2647
Fax: 614-228-2766
Email:

MAHONING VALLEY SUPPLY INC
691 MCCLURG RD
YOUNGSTOWN, OH 44501
USA
Phone:
Fax:
Email:

PAQUIN COMPANY
26981 LAKELAND BLVD
EUCLID SPUR OFF EXPW 90
CLEVELAND, OH 44132
USA
Phone: 216-261-5700
Fax: 216-261-5705
URL: www.paquin.com
Email: Paquin@paquin.com

PAQUIN COMPANY
8050 BECKETT CTR DR
WEST CHESTER, OH 45069
USA
Phone: 513-860-1117
Fax: 513-860-2822
Email:

RIM & WHEEL SERVICE INC
1014 GEST STREET
CINCINNATI, OH 45203
USA
Phone: 513-721-6940
Fax: 513-721-4160
Email:

RIM & WHEEL SERVICE INC
1577 HARMON AVENUE
COLUMBUS, OH 43223
USA
Phone: 614-445-7272
Fax: 614-445-7274
Email:

RIM & WHEEL SERVICE INC
827 HALL AVENUE
DAYTON, OH 45404
USA
Phone: 937-222-8351
Fax: 937-222-1456
Email:

STERLING RUBBER PRODUCTS CO
1730 SOUTH DIXIE HIGHWAY
LIMA, OH 45804
USA
Phone: 419-227-6002
Fax: 419-227-9012
Email:

TORQUE DRIVES
317 S PARK AVE
WARREN, OH 44482-1830
USA
Phone: 330-399-1000
Fax:
Email:

TORQUE DRIVES
6517 PROMLER AVER
NORTH CANTON, OH 44720
USA
Phone: 330-966-0011
Fax: 330-966-0111
Email:

VOTO MANUFACTURERS SALES CO
7888 ST RTE 7 NORTH
PO BOX 330
CHESHIRE, OH 45620
USA
Phone: 614-446-2641
Fax: 614-446-9713
Email:


Express Stores CENTRE SUPPLY COMPANY
AEROQUIP EXPRESS HOSE CENTER
2239 STATE ST S E
PO BOX 608
NEW PHILADELPHIA, OH 44663
USA
Phone: 330-339-3601
Fax: 330-339-5020
Email:

F B WRIGHT COMPANY
AEROQUIP EXRPESS HOSE CENTER
9005 SUTTON PLACE
HAMILTON, OH 45011
USA
Phone: 513-874-3890
Fax: 513-874-2690
URL: www.hoseandgaskets.com
Email: sales@hoseandgaskets.com

FOURNIER RUBBER & SUPPLY CO
AEROQUIP EXPRESS HOSE CENTER
1341 NORTON AVE (43212)
PO BOX 548
COLUMBUS, OH 43216-0548
USA
Phone: 614-294-6453
Fax: 614-294-0644
URL: www.aeroquipdistributor.com/fournier
Email: near4@aol.com

MURDOCK INDUSTRIAL
AEROQUIP EXPRESS HOSE CENTER
553 CARROLL STREET
AKRON, OH 44304
USA
Phone: 330-535-7105
Toll-free: 330-535-7105
Fax: 330-535-1125
URL: ww.murdockindustrial.com
Email: aeroquip@murdockindustrial.com

STERLING RUBBER PRODUCTS CO
AEROQUIP EXPRESS HOSE CENTER
3190 KETTERING BLVD S
DAYTON, OH 45439
USA
Phone: 937-298-0241
Fax: 937-298-6086
URL: www.sterlingrubber.com
Email: ryarger@sterlingrubber.com
Old 03-31-2003 | 04:31 PM
  #5  
FSTFBDY's Avatar
Supreme Member
iTrader: (33)
 
Joined: Jul 2000
Posts: 5,945
Likes: 1
From: Boosted Land
Car: 92 Z28
Engine: Boosted LSX
Originally posted by TPl383
why not get the fitting and do it yourself. Ive done hi psi fitting befor its not hard. Just get the right type of line and your set.

Ive done hydraulic lines and tested em to 3000psi and the fitting held good and the line didn't pop. This was rubber lines also.

Earls make pish in fittings. Dono how much psi they are rated at but might be worth looking into.
Nope if you get the right fitting only tools you need are 2 wrenches. and We tested in a special rig we had at my old job to make sure the stuff was good. (aviation mech)
Old 03-31-2003 | 06:53 PM
  #6  
bjm323's Avatar
Thread Starter
Member
 
Joined: Feb 2002
Posts: 255
Likes: 0
From: Northeast OH
Car: '91 Camaro RS
Whew!!! Damn Dan, that was a long post. Thanks for the info. TPI383, thanks for the reply. I went ahead and ordered the stuff from Summit. It will be here tomorrow. I have been told to look forward to some bloody fingers when I try separated the stainless braid from the Teflon. What's the worst that can happen, I end up with all my finger tips cut up and the line bursts under the nitrous pressure and smacks me in the noggin!! LOL!! I have been told that it might do me some good!! LMAO!!!
Old 04-01-2003 | 08:53 AM
  #7  
FSTFBDY's Avatar
Supreme Member
iTrader: (33)
 
Joined: Jul 2000
Posts: 5,945
Likes: 1
From: Boosted Land
Car: 92 Z28
Engine: Boosted LSX
Originally posted by bjm323
Whew!!! Damn Dan, that was a long post. Thanks for the info. TPI383, thanks for the reply. I went ahead and ordered the stuff from Summit. It will be here tomorrow. I have been told to look forward to some bloody fingers when I try separated the stainless braid from the Teflon. What's the worst that can happen, I end up with all my finger tips cut up and the line bursts under the nitrous pressure and smacks me in the noggin!! LOL!! I have been told that it might do me some good!! LMAO!!!
Good luck and Let us know how many bloody fingers ya get
Old 04-01-2003 | 10:09 AM
  #8  
a73camaro's Avatar
Senior Member
 
Joined: Jan 2001
Posts: 677
Likes: 0
From: Denver, CO
Can you use steel line, bend it and add the flairs with a flairing tool?
Old 04-04-2003 | 09:39 AM
  #9  
B4Ctom1's Avatar
TGO Supporter
20 Year Member
 
Joined: Jul 2001
Posts: 4,991
Likes: 1
From: Cheyenne, Wyoming
Car: 1992 B4C 1LE
Engine: Proaction 412, Accel singleplane
Transmission: built 700R4 w/custom converter
Axle/Gears: stock w/later 4th gen torsen pos
NX makes lines to fit to order
Old 04-13-2003 | 04:00 PM
  #10  
bjm323's Avatar
Thread Starter
Member
 
Joined: Feb 2002
Posts: 255
Likes: 0
From: Northeast OH
Car: '91 Camaro RS
Well, I did it. 2 lines completed, only 1 bloody finger and a cut up palm. LOL!! It was easier than I thought it would be. Now if I could only pressure test them I feel better about it but, I guess I'll find out when I put the juice to it.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
morrow
Suspension and Chassis
78
01-13-2024 01:29 PM
Hotrodboba400
Firebirds for Sale
3
12-10-2019 08:07 PM
NastyEngines
Group Purchases
4
09-08-2015 11:14 AM
TBRays98
Tech / General Engine
6
09-06-2015 06:05 PM
Hotrodboba400
Firebirds for Sale
0
09-02-2015 08:28 PM




All times are GMT -5. The time now is 08:31 AM.