Thirdgen roundup swap meet thread!
#1
Thread Starter
Supreme Member
iTrader: (3)
Joined: Jan 2009
Posts: 4,009
Likes: 6
From: Mesquite, Texas
Car: 89 rs, 86 Trans Am
Engine: RS-V6... Trans Am-LG4
Transmission: RS-T5... Trans Am 700r4
Thirdgen roundup swap meet thread!
We now have an official retailer that will at the roundup providing parts for anybody that needs them. If you have need of any thirdgen related parts, Kirk at Johnnydees is you man. Just give him a call or an email and he'll bring you what you need to Georgetown
http://johnnydees.com/camaroparts.htm
for anybody else that has parts they would like to sell, list them on this thread. there might be a buyer out there for your parts.
If you NEED parts and you decide not to go with Johnnydees, post your needs here, and somebody might have jsut what you need and can bring it to the roundup
Happy trading!
http://johnnydees.com/camaroparts.htm
for anybody else that has parts they would like to sell, list them on this thread. there might be a buyer out there for your parts.
If you NEED parts and you decide not to go with Johnnydees, post your needs here, and somebody might have jsut what you need and can bring it to the roundup
Happy trading!
#3
Senior Member
Joined: May 2010
Posts: 633
Likes: 1
From: Baytown, Tx
Car: 1989 Forumla 350 WS6
Engine: 5.7 TPI:Bosch III's 22#'s
Transmission: 700-R4
Axle/Gears: BW 9 Bolt Posi- 3:27
Re: Thirdgen roundup swap meet thread!
We now have an official retailer that will at the roundup providing parts for anybody that needs them. If you have need of any thirdgen related parts, Kirk at Johnnydees is you man. Just give him a call or an email and he'll bring you what you need to Georgetown
http://johnnydees.com/camaroparts.htm
for anybody else that has parts they would like to sell, list them on this thread. there might be a buyer out there for your parts.
If you NEED parts and you decide not to go with Johnnydees, post your needs here, and somebody might have jsut what you need and can bring it to the roundup
Happy trading!
http://johnnydees.com/camaroparts.htm
for anybody else that has parts they would like to sell, list them on this thread. there might be a buyer out there for your parts.
If you NEED parts and you decide not to go with Johnnydees, post your needs here, and somebody might have jsut what you need and can bring it to the roundup
Happy trading!
#4
Supreme Member
iTrader: (2)
Joined: Oct 2007
Posts: 2,605
Likes: 6
From: Kemah, Tx
Car: 1991 z28
Engine: Turbo 310
Transmission: T56
Axle/Gears: D44
Re: Thirdgen roundup swap meet thread!
Parts i Have:
1 set of hooker BBC swap headers, 1 7/8" D-port primaries 3" collectors, painted black, have some clearance dents, no O2 sensor bung, $225
1 set of hedman longtubes 1 5/8" round port primaries 3" ball/socket collectors, have one dent to clear the k-member, painted grey but it's not the best, no O2 bung. $65
Set of Y2K a.k.a. thin spoke C5 corvette chrome rims, they are reproduction rims not GM parts. they are an 8 out of 10 or better when cleaned up, come with solid chrome center caps as well. fronts are 17x8.5 rears are 18x9.5, rear tires are BALD, front have NEW (with casting **** still) Nitto 555 radials 245x45x17 tires ($350 is what i payed for just these two tires iirc). With the tires $400, without tires $225. I will not sell the tires without the rims but will sell the rims and keep the tires.
Parts i need:
T4 turbo flange, 2.5" flex exhaust tube, 2.5" v-bands, 3" v-bands, intercooler, intercooler tubing, aN lines, tan or black T-Top headliner, Aftermarket steering wheel (Grant, Momo, ect.), 60-80lb injectors, tubular k-member for a SBC, wonder bar, STB compatible with a Stealth Ram, built TH400 transmission, a-piller gauge pod, wideband o2, MSD box, ground control weight jacks, good shocks front and rear, really any kind of performance parts.
I can get pics of the headers, but not until this weekend. I have tons more pics of the wheels but i don't want to fill this thread up LOL
1 set of hooker BBC swap headers, 1 7/8" D-port primaries 3" collectors, painted black, have some clearance dents, no O2 sensor bung, $225
1 set of hedman longtubes 1 5/8" round port primaries 3" ball/socket collectors, have one dent to clear the k-member, painted grey but it's not the best, no O2 bung. $65
Set of Y2K a.k.a. thin spoke C5 corvette chrome rims, they are reproduction rims not GM parts. they are an 8 out of 10 or better when cleaned up, come with solid chrome center caps as well. fronts are 17x8.5 rears are 18x9.5, rear tires are BALD, front have NEW (with casting **** still) Nitto 555 radials 245x45x17 tires ($350 is what i payed for just these two tires iirc). With the tires $400, without tires $225. I will not sell the tires without the rims but will sell the rims and keep the tires.
Parts i need:
T4 turbo flange, 2.5" flex exhaust tube, 2.5" v-bands, 3" v-bands, intercooler, intercooler tubing, aN lines, tan or black T-Top headliner, Aftermarket steering wheel (Grant, Momo, ect.), 60-80lb injectors, tubular k-member for a SBC, wonder bar, STB compatible with a Stealth Ram, built TH400 transmission, a-piller gauge pod, wideband o2, MSD box, ground control weight jacks, good shocks front and rear, really any kind of performance parts.
I can get pics of the headers, but not until this weekend. I have tons more pics of the wheels but i don't want to fill this thread up LOL
#5
Supreme Member
iTrader: (5)
Joined: Mar 2011
Posts: 2,893
Likes: 4
From: Central Texas
Car: GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: Aussie 9-bolt/3.27 posi
Re: Thirdgen roundup swap meet thread!
I'm parting out the majority of my 91 TA. PM me with any requests on parts you may want.
Some parts in the pics are already gone. Some parts are already off & ready to go. I will ship, at buyers expense, or they can be picked up in the Austin area. I'll be there & can deliver or ship earlier, if the person needs it before to get there or just plain wants it sooner.
Front fenders are already gone
Steering wheel is spoken for
Front parking lights & fog lights are gone
Drivers side taillight is bad, passenger side light is good
Interior is gray
Doors not 4 sale
Some parts in the pics are already gone. Some parts are already off & ready to go. I will ship, at buyers expense, or they can be picked up in the Austin area. I'll be there & can deliver or ship earlier, if the person needs it before to get there or just plain wants it sooner.
Front fenders are already gone
Steering wheel is spoken for
Front parking lights & fog lights are gone
Drivers side taillight is bad, passenger side light is good
Interior is gray
Doors not 4 sale
Last edited by BlackenedBird; 03-10-2011 at 08:22 PM.
#6
Member
iTrader: (4)
Joined: Mar 2009
Posts: 399
Likes: 0
From: Gonzales, LA
Car: 85 Camaro Z28
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: 3.42
Re: Thirdgen roundup swap meet thread!
sorry to intrude, but I had a question about johnnydees.... I am in Louisiana btw... Is there another email addy for him b/c I never ever get a response from the one listed on the website....
#7
Senior Member
Joined: May 2010
Posts: 633
Likes: 1
From: Baytown, Tx
Car: 1989 Forumla 350 WS6
Engine: 5.7 TPI:Bosch III's 22#'s
Transmission: 700-R4
Axle/Gears: BW 9 Bolt Posi- 3:27
Re: Thirdgen roundup swap meet thread!
I called them on the phone. Then used email for Pay Pal. Don't be surprised when they answer with just hello. I ordered a hood spring from them Monday and it came today.
Trending Topics
#8
Member
iTrader: (1)
Joined: Sep 2009
Posts: 169
Likes: 0
From: ft.lauderdale Florida
Car: 1989 IROC Z
Engine: 5.0 tpi. stock [for now]
Transmission: T5
Re: Thirdgen roundup swap meet thread!
I'm parting out the majority of my 91 TA. PM me with any requests on parts you may want.
Some parts in the pics are already gone. Some parts are already off & ready to go. I will ship, at buyers expense, or they can be picked up in the Austin area.
Front fenders are already gone
Steering wheel is spoken for
Front parking lights & fog lights are gone
Drivers side taillight is bad, passenger side light is good
Interior is gray
Some parts in the pics are already gone. Some parts are already off & ready to go. I will ship, at buyers expense, or they can be picked up in the Austin area.
Front fenders are already gone
Steering wheel is spoken for
Front parking lights & fog lights are gone
Drivers side taillight is bad, passenger side light is good
Interior is gray
#9
Supreme Member
iTrader: (5)
Joined: Mar 2011
Posts: 2,893
Likes: 4
From: Central Texas
Car: GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: Aussie 9-bolt/3.27 posi
Re: Thirdgen roundup swap meet thread!
I should have a white one to sale soon. Would need painting, but the black one isn't perfect paint either.
#10
Member
iTrader: (1)
Joined: Sep 2009
Posts: 169
Likes: 0
From: ft.lauderdale Florida
Car: 1989 IROC Z
Engine: 5.0 tpi. stock [for now]
Transmission: T5
Re: Thirdgen roundup swap meet thread!
i emailed him yesterday, got a responce today, he didnt have what i needed but he did reply. if i were you & he wasent replying id give him a call.
#13
Thread Starter
Supreme Member
iTrader: (3)
Joined: Jan 2009
Posts: 4,009
Likes: 6
From: Mesquite, Texas
Car: 89 rs, 86 Trans Am
Engine: RS-V6... Trans Am-LG4
Transmission: RS-T5... Trans Am 700r4
Re: Thirdgen roundup swap meet thread!
That's why we thought it would be cool to invite them to the roundup. They are coming where the action and customers are.
#14
Senior Member
Joined: May 2010
Posts: 633
Likes: 1
From: Baytown, Tx
Car: 1989 Forumla 350 WS6
Engine: 5.7 TPI:Bosch III's 22#'s
Transmission: 700-R4
Axle/Gears: BW 9 Bolt Posi- 3:27
Re: Thirdgen roundup swap meet thread!
I have a couple of items to bring.
Last edited by texascat2; 03-10-2011 at 08:10 PM. Reason: To make sense! lol
#15
Thread Starter
Supreme Member
iTrader: (3)
Joined: Jan 2009
Posts: 4,009
Likes: 6
From: Mesquite, Texas
Car: 89 rs, 86 Trans Am
Engine: RS-V6... Trans Am-LG4
Transmission: RS-T5... Trans Am 700r4
Re: Thirdgen roundup swap meet thread!
little clarification here people. Please only post parts for sale on this thread if you intend to be AT THE ROUNDUP to deliver them in person. Otherwise, start your own thread. Thanks
#16
Member
iTrader: (2)
Joined: May 2008
Posts: 104
Likes: 1
From: Austin, Texas
Car: 87 GTA
Engine: L98
Transmission: Automatic
Axle/Gears: 2:73
Re: Thirdgen roundup swap meet thread!
I have a set of PMD seats for sale. $400
http://www.austinthirdgen.org/forum/...showtopic=4878
http://www.austinthirdgen.org/forum/...showtopic=4878
#17
Junior Member
Joined: Nov 2007
Posts: 7
Likes: 0
From: san antonio
Car: 1988 trans ama gta
Engine: 92 vette 350
Transmission: pos t5 ....# 4
Axle/Gears: ????
Re: Thirdgen roundup swap meet thread!
Hey guys i have a 700 r4 that i need gone went t5 nothing is wrong with it , i was holiding on to it in case i i found a car that need it but now i need to get my car going thanks ill take $350 OBO thanks RAM you can call 210 4410478 only has about 45k on it thanks
#19
Supreme Member
iTrader: (3)
Joined: Jul 2004
Posts: 2,989
Likes: 5
Car: '91 Z28 convertible
Engine: TPI
Transmission: T5
Axle/Gears: 3.27 posi disc
Re: Thirdgen roundup swap meet thread!
I could bring the dash pad that I have. It's in great shape with only one small crack.
I got plenty of other parts: 350 SBC crank shaft, steering boxes, bunch of electrical parts etc. I can bring a few boxes of this crap with me.
Lou
I got plenty of other parts: 350 SBC crank shaft, steering boxes, bunch of electrical parts etc. I can bring a few boxes of this crap with me.
Lou
#20
Supreme Member
iTrader: (5)
Joined: Mar 2011
Posts: 2,893
Likes: 4
From: Central Texas
Car: GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: Aussie 9-bolt/3.27 posi
Re: Thirdgen roundup swap meet thread!
I have a brand new set of red powdercoated Spohn SFCs. $150 delivered to the Roundup or picked up locally before that.
Also willing to ship at buyer's expense, if they want them before that, like to have on the car before they come to the Roundup.
EDIT: Sold!
Also willing to ship at buyer's expense, if they want them before that, like to have on the car before they come to the Roundup.
EDIT: Sold!
Last edited by BlackenedBird; 04-28-2011 at 12:26 PM.
#22
Thread Starter
Supreme Member
iTrader: (3)
Joined: Jan 2009
Posts: 4,009
Likes: 6
From: Mesquite, Texas
Car: 89 rs, 86 Trans Am
Engine: RS-V6... Trans Am-LG4
Transmission: RS-T5... Trans Am 700r4
Re: Thirdgen roundup swap meet thread!
Hey kewl, I could use a set of 3rd or 4th gen window sweep. Got any?
#23
Member
iTrader: (3)
Joined: Aug 2002
Posts: 245
Likes: 0
From: Austin, TEXAS
Car: 2x1991 & 2000 Camaros
Engine: 350, 305 & LS1
Transmission: TH-700R4 and 4l60E
Re: Thirdgen roundup swap meet thread!
Which set do you need?
I have a set of 3rd Gen ones but not 4th gen ones separate...just on the door panels.
I have a set of 3rd Gen ones but not 4th gen ones separate...just on the door panels.
#25
Supreme Member
iTrader: (3)
Joined: Jul 2004
Posts: 2,989
Likes: 5
Car: '91 Z28 convertible
Engine: TPI
Transmission: T5
Axle/Gears: 3.27 posi disc
Re: Thirdgen roundup swap meet thread!
I started making more STS (Sequential Turn Signal) units so I will be bringing some with me to the roundup. I can swap for parts or $50 cash, non-negotiable.
Lou
Lou
#28
Supreme Member
iTrader: (1)
Joined: Mar 2007
Posts: 3,525
Likes: 7
From: Arlington, Tx
Car: 91 Camaro RS
Engine: empty bay (for now)
Transmission: Built T-56
Axle/Gears: 3.42 stock posi disc
Re: Thirdgen roundup swap meet thread!
Ive got a perfectly fine centerlink and functional idler arm, along with some slightly loose inner and outter tie rods up for grabs. I replaced all these with brand new stuff from hawks and summit. As stated, centerlink has 0 issues, just felt like replacing all the steering (minus the column and box). Idler arm has a slight up ad down movement but works. Tie rods have no up/down movment but are kinda loose rotating around.
#29
Joined: Jul 2001
Posts: 529
Likes: 0
From: Richardson, TX
Car: 85 Iroc
Engine: 305 LB9
Transmission: 700r4
Axle/Gears: 3.27
Re: Thirdgen roundup swap meet thread!
I have a set of GTA wheels that are great driver quality. Tires are shot but wheels are good. $400
Headlight assemblies from Trans Am with motors and all - $80 each
Hood from Trans Am GTA - surface rusty - $100
Headlight assemblies from Trans Am with motors and all - $80 each
Hood from Trans Am GTA - surface rusty - $100
#31
Supreme Member
iTrader: (5)
Joined: Mar 2011
Posts: 2,893
Likes: 4
From: Central Texas
Car: GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: Aussie 9-bolt/3.27 posi
Re: Thirdgen roundup swap meet thread!
SFCs sold. THANKS!
I have a dual gauge pod, the hardtop a-pillar with the hole already cut for the wires & 2 gauges. AFR gauge (not wide band) & a tranny temp gauge. Was asking $75 for all 4 pieces (a-pillar, pod, 2 gauges). Lemme know if your interested & I can bring them to the Roundup. If you want them sooner too.
Parts i need:
T4 turbo flange, 2.5" flex exhaust tube, 2.5" v-bands, 3" v-bands, intercooler, intercooler tubing, aN lines, tan or black T-Top headliner, Aftermarket steering wheel (Grant, Momo, ect.), 60-80lb injectors, tubular k-member for a SBC, wonder bar, STB compatible with a Stealth Ram, built TH400 transmission, a-piller gauge pod, wideband o2, MSD box, ground control weight jacks, good shocks front and rear, really any kind of performance parts.
T4 turbo flange, 2.5" flex exhaust tube, 2.5" v-bands, 3" v-bands, intercooler, intercooler tubing, aN lines, tan or black T-Top headliner, Aftermarket steering wheel (Grant, Momo, ect.), 60-80lb injectors, tubular k-member for a SBC, wonder bar, STB compatible with a Stealth Ram, built TH400 transmission, a-piller gauge pod, wideband o2, MSD box, ground control weight jacks, good shocks front and rear, really any kind of performance parts.
#33
Thread Starter
Supreme Member
iTrader: (3)
Joined: Jan 2009
Posts: 4,009
Likes: 6
From: Mesquite, Texas
Car: 89 rs, 86 Trans Am
Engine: RS-V6... Trans Am-LG4
Transmission: RS-T5... Trans Am 700r4
Re: Thirdgen roundup swap meet thread!
the way I see it going down is they are going to bring any parts that people need (from the people that have called them ahead of time and requested parts)
I've also asked them to bring a selection of "common need" parts, but I'm not sure how they are going set up and display them
As far as everybody else, we're not having tables and rows for browsing through parts. that's what this thread is for. Post your need or you parts, and if if we find a match for a need and a seller, we're golden
I've also asked them to bring a selection of "common need" parts, but I'm not sure how they are going set up and display them
As far as everybody else, we're not having tables and rows for browsing through parts. that's what this thread is for. Post your need or you parts, and if if we find a match for a need and a seller, we're golden
#34
Supreme Member
iTrader: (5)
Joined: Mar 2011
Posts: 2,893
Likes: 4
From: Central Texas
Car: GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: Aussie 9-bolt/3.27 posi
Re: Thirdgen roundup swap meet thread!
I have an Accel Super Coil for HEI for sale: $30
The Accel decal has peeled off & is gone, but that is just cosmetic anyways.
The Accel decal has peeled off & is gone, but that is just cosmetic anyways.
#35
Supreme Member
iTrader: (5)
Joined: Mar 2011
Posts: 2,893
Likes: 4
From: Central Texas
Car: GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: Aussie 9-bolt/3.27 posi
Re: Thirdgen roundup swap meet thread!
I need a stock pan for a 700R4. NO extra depth. NO drain plug. 100% stock.
Anybody got one that they can bring to the Roundup?
Anybody got one that they can bring to the Roundup?
#36
Supreme Member
iTrader: (1)
Joined: Mar 2007
Posts: 3,525
Likes: 7
From: Arlington, Tx
Car: 91 Camaro RS
Engine: empty bay (for now)
Transmission: Built T-56
Axle/Gears: 3.42 stock posi disc
Re: Thirdgen roundup swap meet thread!
I got 2 700r4s sitting in the bed of my truck, one pans got a drain plug and one doesnt.
#37
Supreme Member
iTrader: (1)
Joined: Mar 2007
Posts: 3,525
Likes: 7
From: Arlington, Tx
Car: 91 Camaro RS
Engine: empty bay (for now)
Transmission: Built T-56
Axle/Gears: 3.42 stock posi disc
Re: Thirdgen roundup swap meet thread!
Ive also got a full set of those stupid side molding/bumper things. Currently painted stock red. $5 takes um.
#40
Supreme Member
iTrader: (5)
Joined: Mar 2011
Posts: 2,893
Likes: 4
From: Central Texas
Car: GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: Aussie 9-bolt/3.27 posi
Re: Thirdgen roundup swap meet thread!
I'm sure it is still in good shape.....DEAL!
My tranny pan has a drain plug put in it & drags over speed bumps, sharp driveway angles, etc. So it caught & got bent backwards, but still "seals". I just have to watch my fluid level. Tired of doing that.
I'll get it from you at the Roundup & we can work out, via PM, on how to find each other there.
My tranny pan has a drain plug put in it & drags over speed bumps, sharp driveway angles, etc. So it caught & got bent backwards, but still "seals". I just have to watch my fluid level. Tired of doing that.
I'll get it from you at the Roundup & we can work out, via PM, on how to find each other there.
#41
Senior Member
Joined: Mar 2002
Posts: 522
Likes: 9
From: Syracuse, Utah
Engine: None
Transmission: None
Re: Thirdgen roundup swap meet thread!
Here is what I have for the swap meet.
ENGINE
82-82 Firebird/Camaro 5.0 HO Air cleaner
85-87 Firebird/Trans Am TPI intake ducting box
88-89 Firebird/Trans Am MAF sensor mounting bracket
90-92 Firebird/Trans Am intake ducting
85-87 TPI cold start injector
82-88 Camaro/Firebird radiator overflow bottle
89-92 Camaro/Firebird radiator overflow bottle
14x3 K&N open element filter (needs oil)
Fram 14x2 open element filter (new)
Holley 600 cfm vacuum sec. w/ center hung float bowls (needs rebuild)
DRIVETRAIN/TRANSMISSION
700R4 Torque converter
700R4 Flexplate
Flywheel for a 2 piece rear main seal block
INTERIOR
82-92 Firebird/Trans Am/GTA dash pocket (black single pocket)
82-92 Gray rear speaker sail panels
82-92 Camaro/Firebird gray interior hatch trim
84-87 Firebird/Trans Am horn button
85-92 Firebird stereo faceplate
82-92 Firebird/Camaro overhead console(hardtop cars)
85-92 Firebird Center Console plastic for T-5
1998 Z-28 Gray lower center console plastic
EXTERIOR
4 Firebird 15x7 Rims w/tires (ones pictured in my signature)
85-90 Trans Am Taillight (passenger side)
Spare donut tire
ENGINE
82-82 Firebird/Camaro 5.0 HO Air cleaner
85-87 Firebird/Trans Am TPI intake ducting box
88-89 Firebird/Trans Am MAF sensor mounting bracket
90-92 Firebird/Trans Am intake ducting
85-87 TPI cold start injector
82-88 Camaro/Firebird radiator overflow bottle
89-92 Camaro/Firebird radiator overflow bottle
14x3 K&N open element filter (needs oil)
Fram 14x2 open element filter (new)
Holley 600 cfm vacuum sec. w/ center hung float bowls (needs rebuild)
DRIVETRAIN/TRANSMISSION
700R4 Torque converter
700R4 Flexplate
Flywheel for a 2 piece rear main seal block
INTERIOR
82-92 Firebird/Trans Am/GTA dash pocket (black single pocket)
82-92 Gray rear speaker sail panels
82-92 Camaro/Firebird gray interior hatch trim
84-87 Firebird/Trans Am horn button
85-92 Firebird stereo faceplate
82-92 Firebird/Camaro overhead console(hardtop cars)
85-92 Firebird Center Console plastic for T-5
1998 Z-28 Gray lower center console plastic
EXTERIOR
4 Firebird 15x7 Rims w/tires (ones pictured in my signature)
85-90 Trans Am Taillight (passenger side)
Spare donut tire
#44
Thread Starter
Supreme Member
iTrader: (3)
Joined: Jan 2009
Posts: 4,009
Likes: 6
From: Mesquite, Texas
Car: 89 rs, 86 Trans Am
Engine: RS-V6... Trans Am-LG4
Transmission: RS-T5... Trans Am 700r4
Re: Thirdgen roundup swap meet thread!
thanks for the pics, but I was looking for one for a buddy that already has a a yellow one...
#45
Junior Member
Joined: Jul 2009
Posts: 11
Likes: 0
From: Houston, Tx
Car: 1988 camaro
Engine: 355 blueprint engine
Transmission: 700 corvette servo
Axle/Gears: stock 4.11
Re: Thirdgen roundup swap meet thread!
i have all of the stock intake system if any wants it
I also have all the smog a.i.r. system, if anyone needs it for their car
Also i have some stock covers (the covers are four bolts down the middle)
I also have all the smog a.i.r. system, if anyone needs it for their car
Also i have some stock covers (the covers are four bolts down the middle)
#46
Supreme Member
iTrader: (1)
Joined: Mar 2007
Posts: 3,525
Likes: 7
From: Arlington, Tx
Car: 91 Camaro RS
Engine: empty bay (for now)
Transmission: Built T-56
Axle/Gears: 3.42 stock posi disc
Re: Thirdgen roundup swap meet thread!
I'm sure it is still in good shape.....DEAL!
My tranny pan has a drain plug put in it & drags over speed bumps, sharp driveway angles, etc. So it caught & got bent backwards, but still "seals". I just have to watch my fluid level. Tired of doing that.
I'll get it from you at the Roundup & we can work out, via PM, on how to find each other there.
My tranny pan has a drain plug put in it & drags over speed bumps, sharp driveway angles, etc. So it caught & got bent backwards, but still "seals". I just have to watch my fluid level. Tired of doing that.
I'll get it from you at the Roundup & we can work out, via PM, on how to find each other there.
#47
Senior Member
iTrader: (4)
Joined: Mar 2004
Posts: 813
Likes: 1
From: San Antonio, Tx
Car: 86 Camaro Z28/ 87 Camaro IROC Z28
Engine: 5.0L TPI LB9 / 5.0 TPI LB9 w/cam
Transmission: Built 700R4 with Transgo shift kit
Axle/Gears: 3.27 9 bolt Posi/ 2.73 10 bolt Posi
Re: Thirdgen roundup swap meet thread!
Anyone have a rear rollup cargo cover in good shape? I had one shipped to me, but one of the ends got damaged during the shipping.
#48
Senior Member
Joined: Oct 1999
Posts: 786
Likes: 1
From: Austin, Tx
Car: 92 Formula
Engine: L98
Transmission: A4
Re: Thirdgen roundup swap meet thread!
I'm looking for:
1. Tail lights (basic firebird, or 91-92 TA style)
2. drivers fender (firebird, no hole, prefer blue...)
3. 91-92 Aero spoiler - (TA/Forumla type)
1. Tail lights (basic firebird, or 91-92 TA style)
2. drivers fender (firebird, no hole, prefer blue...)
3. 91-92 Aero spoiler - (TA/Forumla type)
#50
Joined: May 2001
Posts: 1,405
Likes: 477
From: Pflugerville, Texas
Car: 92 Heritage Camaro Z28
Engine: 350 TPI
Transmission: auto
Axle/Gears: 3.23 Limited Slip
Re: Thirdgen roundup swap meet thread!
Still have my instrument cluster set:
https://www.thirdgen.org/forums/inte...camaro-v6.html
Let me know if anyone is interested.
https://www.thirdgen.org/forums/inte...camaro-v6.html
Let me know if anyone is interested.