COMP CAM for 350 TPI (260/.444, 350horse) with lifters and valve springs!!
#1
Junior Member
Thread Starter
Join Date: Nov 2005
Location: lockhart, texas (next to austin)
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC Z28
Engine: 355, all edelbrock performer rpm
Transmission: 700r4, B&M shift kit
COMP CAM for 350 TPI (260/.444, 350horse) with lifters and valve springs!!
Here's the story:
The owner of an 86 iroc built a 350 motor that produced 350 horsepower with this cam, some regular old 87 iroc heads and an 86 camaro 305 tuned port injection system. He drove it for about 2 months when the tuned port started going out. I bought the car and converted to carb with a much bigger cam. Thus, this cam is practically new and comes with the lifters and the valve springs. This cam alone is sold through summit racing for $114.00. The first person with $75 or the best offer will take it all.
Call Jim @ 512 398-3421 or email hughes1986 [at] sbcglobal [dot] net.
Here are the full specs:
Brand: Competition Cams
Product Line: Competition Cams Computer-Controlled Camshafts
Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: 1,200-5,200 RPM
Intake Duration at 050 inch Lift: 212
Exhaust Duration at 050 inch Lift: 212
Duration at 050 inch Lift: 212 int./212 exh.
Advertised Intake Duration: 260
Advertised Exhaust Duration: 260
Advertised Duration: 260 int./260 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.444
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.444
Valve Lift with Factory Rocker Arm Ratio: 0.444 int./0.444 exh. lift
Lobe Separation (degrees): 112
Intake Valve Lash (in): 0.000
Exhaust Valve Lash (in): 0.000
Computer Controlled: Yes
Grind Number: CS 260H-12 (350/T.P.I.)
The owner of an 86 iroc built a 350 motor that produced 350 horsepower with this cam, some regular old 87 iroc heads and an 86 camaro 305 tuned port injection system. He drove it for about 2 months when the tuned port started going out. I bought the car and converted to carb with a much bigger cam. Thus, this cam is practically new and comes with the lifters and the valve springs. This cam alone is sold through summit racing for $114.00. The first person with $75 or the best offer will take it all.
Call Jim @ 512 398-3421 or email hughes1986 [at] sbcglobal [dot] net.
Here are the full specs:
Brand: Competition Cams
Product Line: Competition Cams Computer-Controlled Camshafts
Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: 1,200-5,200 RPM
Intake Duration at 050 inch Lift: 212
Exhaust Duration at 050 inch Lift: 212
Duration at 050 inch Lift: 212 int./212 exh.
Advertised Intake Duration: 260
Advertised Exhaust Duration: 260
Advertised Duration: 260 int./260 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.444
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.444
Valve Lift with Factory Rocker Arm Ratio: 0.444 int./0.444 exh. lift
Lobe Separation (degrees): 112
Intake Valve Lash (in): 0.000
Exhaust Valve Lash (in): 0.000
Computer Controlled: Yes
Grind Number: CS 260H-12 (350/T.P.I.)
Thread
Thread Starter
Forum
Replies
Last Post
1988iroc350tpi
Tech / General Engine
8
08-14-2015 07:52 PM