475hk engine/engine parts
02-27-2005, 09:52 PM
#1
Want a title? Post!
Thread Starter
Join Date: Jan 2002
Location: fort worth, tx
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro
Engine: 468, 11:1
Transmission: T56
475hp engine/engine parts
I live in Fort Worth, TX
it is a '92 350 4bolt main, internally ballanced, 11:1, carburated, engine
had 475hp or 370hp/355 torque rear wheel (have dyno sheet)
it broke, so i decided to get a new engine.
however there are great parts left.
Get pistons, cam, lifters, and some work, and you have a great engine!
it has one bad valve, one bad rocker, block has one cylinder with scratch so it needs to be bored/honed to 40 or 60 over.
cam/lifters is worn out too.
all parts $900
induvidual parts:
Dart Iron Eagle 200 heads and intake.
Have $700 in porting,valve and milling at Kim Barr racing engines!
Milled to 58cc to get 11:1 compression. heads are fully ported and polished to the intake. it has Competition Cams double roller rockers 1.6 ratio and comes with valves. Intake is a Edelbrok Victor Jr.
for now they are disassembled and acid washed. it is one bad rocker and valve. $500.
if you want it touched up, assembled by a machine shop, and a new rocker and valve, add $150 please.
i would prefer to sell the intake and the intake together since they are ported to each other, and gives 470hk.
Eagle "ESP" H-beam rods.
5,7" long. $200
GM steel crank .010/.010 . nice. doesn't need to be turned, you might want to polish it, but i don't think you need to. $100
Fluid dampner harmonic ballancer $100
Flywheel, 10,4", 153 tooth, one rear main seal. lightweight $ 50
16 Comp. Cams chromemoly push rods. for the rockers over and a hydraulic roller cam. and guide plates $ 40
Double roller timing chain, gears, and cover $ 30
Water pump, Flow Kooler high flow $30
Valve covers, crome $20
Oil pump $20
Oil pan. Morroso $50
Block. '92 one piece rear main. from a truck. 4 bolt main.
bored .030 over, needs to be bored/honed to .040 over.
comes with 4 bolt caps. cleaned and acid washed. $50
Air Flow Resource Hydra Rev Kit $30
morten
email: morten@jsmi.org
it is a '92 350 4bolt main, internally ballanced, 11:1, carburated, engine
had 475hp or 370hp/355 torque rear wheel (have dyno sheet)
it broke, so i decided to get a new engine.
however there are great parts left.
Get pistons, cam, lifters, and some work, and you have a great engine!
it has one bad valve, one bad rocker, block has one cylinder with scratch so it needs to be bored/honed to 40 or 60 over.
cam/lifters is worn out too.
all parts $900
induvidual parts:
Dart Iron Eagle 200 heads and intake.
Have $700 in porting,valve and milling at Kim Barr racing engines!
Milled to 58cc to get 11:1 compression. heads are fully ported and polished to the intake. it has Competition Cams double roller rockers 1.6 ratio and comes with valves. Intake is a Edelbrok Victor Jr.
for now they are disassembled and acid washed. it is one bad rocker and valve. $500.
if you want it touched up, assembled by a machine shop, and a new rocker and valve, add $150 please.
i would prefer to sell the intake and the intake together since they are ported to each other, and gives 470hk.
Eagle "ESP" H-beam rods.
5,7" long. $200
GM steel crank .010/.010 . nice. doesn't need to be turned, you might want to polish it, but i don't think you need to. $100
Fluid dampner harmonic ballancer $100
Flywheel, 10,4", 153 tooth, one rear main seal. lightweight $ 50
16 Comp. Cams chromemoly push rods. for the rockers over and a hydraulic roller cam. and guide plates $ 40
Double roller timing chain, gears, and cover $ 30
Water pump, Flow Kooler high flow $30
Valve covers, crome $20
Oil pump $20
Oil pan. Morroso $50
Block. '92 one piece rear main. from a truck. 4 bolt main.
bored .030 over, needs to be bored/honed to .040 over.
comes with 4 bolt caps. cleaned and acid washed. $50
Air Flow Resource Hydra Rev Kit $30
morten
email: morten@jsmi.org
Last edited by morten; 02-28-2005 at 08:40 PM.
02-27-2005, 11:05 PM
#2
TGO Supporter
Join Date: Mar 2001
Location: Fort Wayne,In
Posts: 146
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 Formula 350
Engine: 355 HSR
Transmission: Rossler 700R4
Axle/Gears: 9 bolt/3.27
How many miles on the damper and the push rods?What size damper is it? I just emailed the same questions to you. Stewart
02-27-2005, 11:30 PM
#3
Want a title? Post!
Thread Starter
Join Date: Jan 2002
Location: fort worth, tx
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro
Engine: 468, 11:1
Transmission: T56
hmmm, miles?
i think the engine had half a year before i got it.
i used it for 2 years. i drove for a year(!) before i got my Autometer speedometer, so it is hard to say ....
i think the engine had half a year before i got it.
i used it for 2 years. i drove for a year(!) before i got my Autometer speedometer, so it is hard to say ....
02-28-2005, 07:00 PM
#6
Member
iTrader: (1)
Join Date: Sep 2003
Location: Arlington, Tx
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Firebird Formula 350 WS6
Engine: 350
Transmission: 700R4
Air Flow Resource Hydra Rev Kit $30
sold if you still have it.
I live in Arlington and could meet to pick it up. E-mail me
arlockstedt@comcast.net
sold if you still have it.
I live in Arlington and could meet to pick it up. E-mail me
arlockstedt@comcast.net
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
11-14-2015 12:02 AM
Thomas
Interior Parts for Sale
12
10-03-2015 05:34 PM
