What kind of project you got going on with your third gen right now?
#101
Junior Member
Join Date: Aug 2011
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Pontiac Firebird
Engine: 5.7L 350
Transmission: Automatic
Re: What kind of project you got going on with your third gen right now?
I parked my Bird away for the winter now. Got the dash all ripped apart. Going to put all LED lights inside and out. And trying to find some custom gauge overlays. I can't afford real gauges! ha. and a new steering wheel. I love that '60s Muscle car look so I want to go with the BIG wood steering wheel kind of thing and vintage looking gauges.
What do you think about that? Good? Bad?
Got a new door for my driver side, the last week or so the previous owner had it, deer ran head on into it. So I have to get paint and switch the door over, also going to put a rebuild kit in the engine. Doesn't start right, bad oil leak. I hope I don't have to pull out the entire motor..
And just alot of little minor things that need fixed up.
I loved driving it over the summer, lots of rubber necking. ha, but with that caved in Drivers door it was like a big ZIT ON YOUR FOREHEAD, that everyone stares at!
What do you think about that? Good? Bad?
Got a new door for my driver side, the last week or so the previous owner had it, deer ran head on into it. So I have to get paint and switch the door over, also going to put a rebuild kit in the engine. Doesn't start right, bad oil leak. I hope I don't have to pull out the entire motor..
And just alot of little minor things that need fixed up.
I loved driving it over the summer, lots of rubber necking. ha, but with that caved in Drivers door it was like a big ZIT ON YOUR FOREHEAD, that everyone stares at!
#102
Supreme Member
Thread Starter
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: What kind of project you got going on with your third gen right now?
well a 91 bird is 20 years old...i guess it is approaching that vintage status....not really my cup of tea on these cars...but it is your car so you do as you please and love it!
#103
Supreme Member
iTrader: (2)
Join Date: Sep 2003
Location: Woodland, CA
Posts: 10,494
Likes: 0
Received 3 Likes
on
3 Posts
Car: '02 Z06
Engine: L33 5.7
Transmission: T56
Axle/Gears: Stock IRS
Re: What kind of project you got going on with your third gen right now?
steering wheel sounds like a bad idea :\
#104
Junior Member
Join Date: Aug 2011
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Pontiac Firebird
Engine: 5.7L 350
Transmission: Automatic
Re: What kind of project you got going on with your third gen right now?
Technically it is 'vintage' now, well classic. I could never afford the '68-'70 Dodge Charger I've always wanted, so I'll do something with this. I've never done so much work on a car before and actually enjoyed it, it's rather fun. It's especially fun to watch it come together when you actually like the car
#105
Junior Member
Join Date: Jan 2011
Location: Auburn, CA
Posts: 46
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 IROC-Z Camaro
Engine: 355 TPI
Transmission: 700r4
Axle/Gears: BW 9 Bolt 2.77 Posi
Re: What kind of project you got going on with your third gen right now?
Well next for my IROC is new brakes (upgrading to cross drilled and slotted front and rear with some nice pads) and then onto having new headers and exhaust system installed.
#106
Re: What kind of project you got going on with your third gen right now?
my 89 RS will be getting a new aluminum dash and center console with gauges. also custom strut tower brace made to wrap around my tunnel ram setup. and hopefully have the interior wired up.
#107
Supreme Member
Thread Starter
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: What kind of project you got going on with your third gen right now?
Technically it is 'vintage' now, well classic. I could never afford the '68-'70 Dodge Charger I've always wanted, so I'll do something with this. I've never done so much work on a car before and actually enjoyed it, it's rather fun. It's especially fun to watch it come together when you actually like the car
#108
Supreme Member
iTrader: (2)
Join Date: Feb 2009
Location: Delaware
Posts: 1,450
Likes: 0
Received 1 Like
on
1 Post
Car: Lots of 'em
Re: What kind of project you got going on with your third gen right now?
Haven't done a darn thing with the IROC lately.
Bought it as this three years ago.
Started tearing it down in late 2009.
Almost completely torn down now.
Engine apart, it's a good looking 4 bolt block, so a forged 383 build will come one of these years.
Bought it as this three years ago.
Started tearing it down in late 2009.
Almost completely torn down now.
Engine apart, it's a good looking 4 bolt block, so a forged 383 build will come one of these years.
#109
Supreme Member
iTrader: (2)
Join Date: Feb 2009
Location: Delaware
Posts: 1,450
Likes: 0
Received 1 Like
on
1 Post
Car: Lots of 'em
Re: What kind of project you got going on with your third gen right now?
Been way more focused on this one.
T56 swapped in back in March.
Vortech V1 S-trim picked up in May.
And just recently (Few weeks ago) put out over $500 on Borla Stingers.
Gonna save for another daily driver eventually, then get into more serious work on the two. Built engines for both, already got the supercharger for the Mustang, IROC could use a stout 700R4 and a turbo or two.
T56 swapped in back in March.
Vortech V1 S-trim picked up in May.
And just recently (Few weeks ago) put out over $500 on Borla Stingers.
Gonna save for another daily driver eventually, then get into more serious work on the two. Built engines for both, already got the supercharger for the Mustang, IROC could use a stout 700R4 and a turbo or two.
#110
Member
Join Date: Jul 2011
Location: California
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 305 TBI L03
Transmission: Auto
Axle/Gears: 2.73
#111
Junior Member
Join Date: Aug 2011
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Pontiac Firebird
Engine: 5.7L 350
Transmission: Automatic
#112
Member
Join Date: Oct 2009
Location: Berwyn, PA
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 camaro RS
Engine: 350
Transmission: 700r4
Re: What kind of project you got going on with your third gen right now?
new ford 9 inch w/4:10 going into this
https://www.thirdgen.org/forums/hist...urrection.html
looks like we have the same paint
#115
Supreme Member
iTrader: (3)
Join Date: Jul 2011
Location: Katy TEXAS (West Houston)
Posts: 1,826
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 5.0 TBI L03 V8
Transmission: Rebuilt 700R4 W/ Corvette shift kit
Axle/Gears: 2:73 open
Re: What kind of project you got going on with your third gen right now?
Shadow Z
Thats a good project.
Thats a good project.
Last edited by SKELITOR117; 09-08-2011 at 06:00 PM.
#117
Junior Member
Join Date: Aug 2011
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Pontiac Firebird
Engine: 5.7L 350
Transmission: Automatic
Re: What kind of project you got going on with your third gen right now?
Yeah I'd like to see it...I wish I had one.
#118
Junior Member
Join Date: Apr 2006
Location: Northern CA
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 TPI formula
Engine: L98 Vortech
Transmission: TH700r4
Axle/Gears: 3.27
Re: What kind of project you got going on with your third gen right now?
Start saving... I have a buddy jus south of Auburn who owns his own custom shop, been slanging paint since.he was.12. He is my number 1 option right now. I have another guy in the South Sac area who has been at it since he was 15. We grew up together and he painted.for a large number of Lowrider guys both here and in Florida. I trust both 100% and kno.they will stand by there work. Get your paper together and we will go.visit them.
Let's do.that.
Let's do.that.
#119
Supreme Member
Thread Starter
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: What kind of project you got going on with your third gen right now?
that's a good question. that's one of the reason's why I have not thought about repainting mine..well I thought about it. but havnt saved up for it. because right now it is my daily and it'd be hard to put a 5k paint job on it to be weathered constantly
#120
Supreme Member
iTrader: (2)
Join Date: Feb 2006
Location: Sacramento Ca
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Trans am, 91 Camaro RS
Engine: 355 Sbc, nothin yet
Transmission: 700r4- both
Re: What kind of project you got going on with your third gen right now?
#121
Supreme Member
Thread Starter
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: What kind of project you got going on with your third gen right now?
Well I am not even thinking about it right now. But maybe some year in the future haha.
#122
Supreme Member
iTrader: (3)
Join Date: Jul 2011
Location: Katy TEXAS (West Houston)
Posts: 1,826
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 5.0 TBI L03 V8
Transmission: Rebuilt 700R4 W/ Corvette shift kit
Axle/Gears: 2:73 open
Re: What kind of project you got going on with your third gen right now?
You should get flames.
#123
Supreme Member
Thread Starter
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: What kind of project you got going on with your third gen right now?
lol flames arent my thing
#125
Junior Member
Join Date: Apr 2006
Location: Northern CA
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 TPI formula
Engine: L98 Vortech
Transmission: TH700r4
Axle/Gears: 3.27
Re: What kind of project you got going on with your third gen right now?
Yeah, my buddy in Newcastle (east of roseville/rockin, but just west of auburn) does everything from budget re-sprays to all out show jobs. His budget sprays are remarkable. I will check on his avg price range for that type of work and report back. How much body work needs to be done for ur rides?
Want a red to a darker red paint change, so door jams etc need painted.
Looking for a budget driver quality paint job. To me that means basic surface prep, sanding (not stripped to metal of course), and no runs or major orange peel. Like what you see when you take your car to a decent body shop and they fix crash damage...looks original when it's done. A general idea of cost would help me and others who are also needing paint work.
#126
Supreme Member
iTrader: (3)
Join Date: Jul 2011
Location: Katy TEXAS (West Houston)
Posts: 1,826
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 5.0 TBI L03 V8
Transmission: Rebuilt 700R4 W/ Corvette shift kit
Axle/Gears: 2:73 open
Re: What kind of project you got going on with your third gen right now?
Wow. Buying a car with the origional owner's body still inside of it. That is a bold move.
Last edited by SKELITOR117; 09-08-2011 at 11:15 PM.
#127
Supreme Member
iTrader: (2)
Join Date: Feb 2006
Location: Sacramento Ca
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Trans am, 91 Camaro RS
Engine: 355 Sbc, nothin yet
Transmission: 700r4- both
Re: What kind of project you got going on with your third gen right now?
I have two small door dings, one small paintbubble (I just scratched off the paint, the metal underneath looks ok, not rust all the way through), spoiler cracking and all the paint coming off it, and overall paint is pitting. No crash damage, no rust through etc.
Want a red to a darker red paint change, so door jams etc need painted.
Looking for a budget driver quality paint job. To me that means basic surface prep, sanding (not stripped to metal of course), and no runs or major orange peel. Like what you see when you take your car to a decent body shop and they fix crash damage...looks original when it's done. A general idea of cost would help me and others who are also needing paint work.
Want a red to a darker red paint change, so door jams etc need painted.
Looking for a budget driver quality paint job. To me that means basic surface prep, sanding (not stripped to metal of course), and no runs or major orange peel. Like what you see when you take your car to a decent body shop and they fix crash damage...looks original when it's done. A general idea of cost would help me and others who are also needing paint work.
#128
Junior Member
Join Date: Apr 2006
Location: Northern CA
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 TPI formula
Engine: L98 Vortech
Transmission: TH700r4
Axle/Gears: 3.27
Re: What kind of project you got going on with your third gen right now?
well given the fact that I personally will not be painting.your car, I cannot give you a figure and put a guarantee on it. My boy will start an entire car at 2k and damage that has to be repaired is added after he visually assesses the car. I just had a friend go to him for collision work on his front bumper, hood and both fenders. Although it was paid for by insurance, the car looks just as immaculate as factory or better. Customer has a renewed love for his car again and won't stop takin pics of it. Like I said, if u would like to at least talk to him, let's go visit him. Never hurts to talk.
I guess I need to put my new compressor, spraygun, two gal of paint and supplies along with the how to paint books to work
Might look like "some dude did it in his driveway", but that's only because some dude did it in his driveway
#129
Supreme Member
Thread Starter
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: What kind of project you got going on with your third gen right now?
I think only way to get a paint job for under 1k is to do the whole earl scheib, maaco, miracle way. fight with them. and deffinately dont take the car the 1st time they call and tell you that you are done. go through and point out all the imperfections, then they will strip off the clear and put more layers of paint on. then if the clear looks decent, at least you'll have a couple layers of paint under there. haha.
#130
Member
Join Date: Jan 2011
Location: Dundalk, MD
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Car: 70 Chevelle
Engine: 396
Transmission: TH350
Axle/Gears: 10 bolt 3.73
Re: What kind of project you got going on with your third gen right now?
im doing a 88 formula original 305 tbi 5 speed. im swapping it over to a built 700r4 with shift kit and a 350 tpi/chipped. my build can be found at https://www.thirdgen.org/forums/engi...ml#post5034379
#131
Supreme Member
Thread Starter
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: What kind of project you got going on with your third gen right now?
sweet conversion. just couldnt stand the tbi all that much eh?
Off topic now:
Del the moderator locked a thread on us I cannot believe it. so not cool.
Off topic now:
Del the moderator locked a thread on us I cannot believe it. so not cool.
#132
Supreme Member
iTrader: (3)
Join Date: Jul 2011
Location: Katy TEXAS (West Houston)
Posts: 1,826
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 5.0 TBI L03 V8
Transmission: Rebuilt 700R4 W/ Corvette shift kit
Axle/Gears: 2:73 open
Re: What kind of project you got going on with your third gen right now?
Which thread? Just curious.
#133
Supreme Member
Thread Starter
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: What kind of project you got going on with your third gen right now?
the summit bucks. no big deal. my comment probably made him. dont get off topic i dont want my thread locked!
#134
Supreme Member
iTrader: (3)
Join Date: Jul 2011
Location: Katy TEXAS (West Houston)
Posts: 1,826
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 5.0 TBI L03 V8
Transmission: Rebuilt 700R4 W/ Corvette shift kit
Axle/Gears: 2:73 open
Re: What kind of project you got going on with your third gen right now?
I just saw the title and the first sentence that apears when you drag your curser over it and I thought .
But I agree . And to help that, I should mention that I got new rear tires today. Nitto NT555 285/40-17s. They look sick! They are the same ones Jupiter has on his '82 T/A 383.
But I agree . And to help that, I should mention that I got new rear tires today. Nitto NT555 285/40-17s. They look sick! They are the same ones Jupiter has on his '82 T/A 383.
#135
Supreme Member
Thread Starter
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: What kind of project you got going on with your third gen right now?
Im changing my spark plugs, ac delco rapidfires foul to easy. back to standard plugs!
oh and im going to change my fuel pump, I now have too much fuel, which is making my pressure too inconsistent and overpowering my return system. therefore backing pressure up and causing too much crap. damn i hate fuel injection!
oh and im going to change my fuel pump, I now have too much fuel, which is making my pressure too inconsistent and overpowering my return system. therefore backing pressure up and causing too much crap. damn i hate fuel injection!
#136
Junior Member
Join Date: Sep 2011
Location: Tennessee
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Black and Gold Trans Am
Engine: 305 Tuned Port Injection
Transmission: T5 Borg Warner Manual 5-speed
Axle/Gears: 3.08
Re: What kind of project you got going on with your third gen right now?
I was going to replace the bushings, but while up under the car, I decided to clean up the underside and put on an attractive and durable undercoat. I just started this past weekend and man, what a dirty job!! This is gonna take a few Saturdays! I am using a Matco scraper, a rotary wire brush in a powerdrill, a hand brush, and sandpaper!!! I must say though, it will be worth it to know the underside is as clean and sharp as the top side.
#137
Junior Member
Join Date: Dec 2010
Location: St. Louis
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Camaro RS
Engine: 305 soon to be 383
Transmission: 700r4/T56
Axle/Gears: 3.27 ratio
Re: What kind of project you got going on with your third gen right now?
I have too much to list going on with my project right now but I am currently taking the differential out of a camaro to put into a GTA body which I am selling. Than I am putting the GTA differential into my camaro, at that time I will Start the rebuild with a hopefully turbo'd 305 just to see how much power I can make. And of course the engine is going through the works at dependable.
#138
Supreme Member
iTrader: (3)
Join Date: Jul 2011
Location: Katy TEXAS (West Houston)
Posts: 1,826
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 5.0 TBI L03 V8
Transmission: Rebuilt 700R4 W/ Corvette shift kit
Axle/Gears: 2:73 open
Re: What kind of project you got going on with your third gen right now?
An 89 RS w/ 305 TPI and a turbo along w/a GTA Rear dif huh? That'll be interesting.
#139
Supreme Member
Thread Starter
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: What kind of project you got going on with your third gen right now?
Hey Thane your next project is a lower temp thermostat with a new computer chip huh?
#140
Supreme Member
iTrader: (3)
Join Date: Jul 2011
Location: Katy TEXAS (West Houston)
Posts: 1,826
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 5.0 TBI L03 V8
Transmission: Rebuilt 700R4 W/ Corvette shift kit
Axle/Gears: 2:73 open
Re: What kind of project you got going on with your third gen right now?
Yeeeep. That and front tires. Turning in a job application at a Discount Tire store down the street to get more money to emediatly dump into this thing. Wish me luck, prayin' wouldn't hurt either haha.
This Is post #999 by the way. Who wants post #1000?
This Is post #999 by the way. Who wants post #1000?
Last edited by SKELITOR117; 09-13-2011 at 12:59 AM.
#141
Supreme Member
Thread Starter
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: What kind of project you got going on with your third gen right now?
post 1000? of what?
#142
Supreme Member
iTrader: (3)
Join Date: Jul 2011
Location: Katy TEXAS (West Houston)
Posts: 1,826
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 5.0 TBI L03 V8
Transmission: Rebuilt 700R4 W/ Corvette shift kit
Axle/Gears: 2:73 open
Re: What kind of project you got going on with your third gen right now?
My mistake, I got posts and views misxted up. I has dilexia. Dont't mak funna me!
#143
Supreme Member
Thread Starter
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: What kind of project you got going on with your third gen right now?
#144
Supreme Member
Thread Starter
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: What kind of project you got going on with your third gen right now?
trying to revive this thread. So I did my fuel pump...again...and I changed my intake gasket...again...those problems are solved. so now I am getting into the tuning. I have a cold running problem...very bad...but I think I know what the problem is there...so we will see..if all goes well i'll be at the late october grudge fest trying to run a 13...remember the good ol days when a 13 was fast....i wanna go back then...lol.
#145
Junior Member
Join Date: Feb 2009
Location: Tracy, Ca.
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 Chevy Camaro. T-Tops.
Engine: 2.8L V-6 (yea, it cruises nice !)
Transmission: 700-R4
Axle/Gears: 3:42's
Re: What kind of project you got going on with your third gen right now?
trying to revive this thread. So I did my fuel pump...again...and I changed my intake gasket...again...those problems are solved. so now I am getting into the tuning. I have a cold running problem...very bad...but I think I know what the problem is there...so we will see..if all goes well i'll be at the late october grudge fest trying to run a 13...remember the good ol days when a 13 was fast....i wanna go back then...lol.
I did the t top leak fix, so far so good !
#146
Supreme Member
iTrader: (2)
Join Date: Nov 2003
Location: Antelope, CA
Posts: 3,400
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 IrocZ/17 LS 1LE
Engine: 383/LGX
Transmission: 400/TR-3160
Axle/Gears: 3.08/3.27
Re: What kind of project you got going on with your third gen right now?
Im sure you know what these are for. Still have a couple parts I need to order. Hoping to have this done by the end of the month.
#147
Re: What kind of project you got going on with your third gen right now?
trying to revive this thread. So I did my fuel pump...again...and I changed my intake gasket...again...those problems are solved. so now I am getting into the tuning. I have a cold running problem...very bad...but I think I know what the problem is there...so we will see..if all goes well i'll be at the late october grudge fest trying to run a 13...remember the good ol days when a 13 was fast....i wanna go back then...lol.
#148
Supreme Member
Thread Starter
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: What kind of project you got going on with your third gen right now?
#149
Supreme Member
iTrader: (3)
Join Date: Jul 2011
Location: Katy TEXAS (West Houston)
Posts: 1,826
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 5.0 TBI L03 V8
Transmission: Rebuilt 700R4 W/ Corvette shift kit
Axle/Gears: 2:73 open
Re: What kind of project you got going on with your third gen right now?
I finished a bunch of little things this week. Fitted the custom leather shifter boot, putnthe rear veiw mirror back on, fitted the new licence plates and rear plate frame, and something else. I dont remember. Maybe it was a supercharger. hmm....