Third Gen Swap Meet!!
#51
Senior Member
iTrader: (1)
Join Date: Sep 2007
Location: New Philadelphia/ Canton OH
Posts: 914
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 RS, 84 El Camino conquista RIP
Engine: 5.0 (for now)
Transmission: 4L60
Axle/Gears: 2.xx torsen limited slip & 3.42 ope
Re: Third Gen Swap Meet!!
what mods are needed to get the subframe connectors to fit? and is the sub box the one that fits in the back? thanks!
4) competition eng. sub frame connectors weld in type. modification to floor needed for instal. $60 obo
5) sub box for 2 ten inch subs with oooooolllddd rockford fosgates in it. make offer.
4) competition eng. sub frame connectors weld in type. modification to floor needed for instal. $60 obo
5) sub box for 2 ten inch subs with oooooolllddd rockford fosgates in it. make offer.
#52
Member
Join Date: Jan 2006
Location: So.MD
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92rs
Engine: 350
Transmission: 350
Axle/Gears: 3.73/Moser 12bolt
Re: Third Gen Swap Meet!!
700r4 w/ 90,000 miles . Worked fine when removed to do swap . $75 obo
I am also loking for a junk rear to put under my car so I can push it in and out of garage .
thanks Mike
I am also loking for a junk rear to put under my car so I can push it in and out of garage .
thanks Mike
Last edited by raptor80dad; 01-10-2008 at 06:53 PM.
#53
Member
Join Date: Jul 1999
Location: Glenside, PA, USA
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Car: 83 Sport Coupe
Engine: 383ci
Transmission: turbo350
Axle/Gears: 3.42
Re: Third Gen Swap Meet!!
Motion Glass Notchback for sale. No glass, but has never been on a car. Asking $400 and for pick up only. I'm located in central PA, between Hazleton and Allentown.
Email for pics.
Email for pics.
#56
Moderator
Thread Starter
iTrader: (57)
Join Date: Sep 2000
Location: Annapolis Maryland
Posts: 1,149
Likes: 0
Received 14 Likes
on
12 Posts
Car: To many to list
Re: Third Gen Swap Meet!!
4th gen graphite cloth firebird seats $200.Pick up only
https://www.thirdgen.org/forums/inte...-graphite.html
91-92 Z28 wheels with tires $150
https://www.thirdgen.org/forums/exte...tml?highlight=
https://www.thirdgen.org/forums/inte...-graphite.html
91-92 Z28 wheels with tires $150
https://www.thirdgen.org/forums/exte...tml?highlight=
#57
Member
Join Date: Mar 2007
Location: South Side Of Westmonster MD
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Z28 Camaro
Engine: TPI 305
Transmission: 5 spd
Axle/Gears: Uh, Haven't investigated this yet
Re: Third Gen Swap Meet!!
Need TPI Intake parts for MAF setup for a camaro. I have the flex hoses just need the air box itself and the peice that attaches to the MAF sensor.
#59
Re: Third Gen Swap Meet!!
I am interested in the throttle body carb and intake for that. You are asking $30 for both plus shipping? What does shipping cost to zip code 93536 in Lancaster, California.
#61
Senior Member
Join Date: Apr 2001
Location: Diamondhead, MS
Posts: 940
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 20th Ann. TA
Engine: Turbo 3.8 V6
Transmission: 200 4R
Axle/Gears: 3.27
Re: Third Gen Swap Meet!!
I have 2 sets of T-Tops I need to get rid of. I know one set was a large pin, might be both. Haven't pulled them out in years. I think one had a bag also. They were in decent condition. I don't remember having keys for either set.
$40 for all. Come and get them, no shipping. If I get a chance, I'll pull them out and snap some pics.
Have some misc TTA stuff also. Mainly tune up stuff and some stock parts. I'd have to check though. I know I have the stock injectors and stock D5 converter.
$40 for all. Come and get them, no shipping. If I get a chance, I'll pull them out and snap some pics.
Have some misc TTA stuff also. Mainly tune up stuff and some stock parts. I'd have to check though. I know I have the stock injectors and stock D5 converter.
#63
Senior Member
Join Date: Jul 1999
Location: College Park, MD
Posts: 701
Likes: 0
Received 0 Likes
on
0 Posts
Re: Third Gen Swap Meet!!
krisb410,
I just ran across these on the DC Craigslist yesterday, hopefully they're what your friend needs.
http://washingtondc.craigslist.org/m...574779709.html
I just ran across these on the DC Craigslist yesterday, hopefully they're what your friend needs.
http://washingtondc.craigslist.org/m...574779709.html
#64
Supreme Member
iTrader: (11)
2 Dynomax Ultra Flow Mufflers in Stafford VA pm me
i have a set of stock runners, stock tpi base ported alittle, and a stock throttle body with a polished ws6 plate on top, 4.30 3.73 and 2 sets of 2.73 for sale and a ring gear spacer to use a 3 series gear on a 2 series carrier, i have a complete 4th gen 10 bolt with moser axles and the 4.30s in it, also have a 9 bolt posi rear with 3.45s gears but the pinion gear is missing some teeth, make an offer on any of this stuff i need to clean out garage
i have a set of stock runners, stock tpi base ported alittle, and a stock throttle body with a polished ws6 plate on top, 4.30 3.73 and 2 sets of 2.73 for sale and a ring gear spacer to use a 3 series gear on a 2 series carrier, i have a complete 4th gen 10 bolt with moser axles and the 4.30s in it, also have a 9 bolt posi rear with 3.45s gears but the pinion gear is missing some teeth, make an offer on any of this stuff i need to clean out garage
Last edited by Steve86TA; 02-20-2008 at 04:32 PM.
#65
Junior Member
Join Date: Dec 2007
Location: Lynchburg VA
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87Z 87Blazer
Engine: 305TPI 2.8TBI
Transmission: A4 M5
Axle/Gears: 2.73 4.11
Re: Third Gen Swap Meet!!
I am thinking of selling my 1987 Z28. It has 112k on the body and 40k on motor. new blue paint, 4th gen seats, all power options. The car looks, drives and runs great. I will get pics and complete discription up soon. make me an offer.
#66
Senior Member
iTrader: (2)
Join Date: Aug 1999
Location: Elkton MD, USA
Posts: 858
Likes: 0
Received 6 Likes
on
4 Posts
Car: 1985 Camaro Z28, VIN F
Engine: 427 sbc, HSR
Transmission: T-56, self rebuilt 700+ hp
Axle/Gears: Moser 12bolt, 3.42 trutrac
Re: Third Gen Swap Meet!!
Rebuilt (Stock+) T56 ('94-'97) for sale:
This trans is to replace a broken T56, it's not complete for a Auto or T5 swap.
(Needs shifter, sensors, plate transfered from existing T56)
All the internal components were checked/tested and replaced if needed. It includes the upgraded steel 3/4 shift fork. Synchros were all replaced. A .002" preload was shimmed for performance/endurance driving/usage.
The trans is located in Elkton, MD (21921) and can be delivered up to 50mi from there.
$1000+core for the trans, or $1400 outright.
This trans is to replace a broken T56, it's not complete for a Auto or T5 swap.
(Needs shifter, sensors, plate transfered from existing T56)
All the internal components were checked/tested and replaced if needed. It includes the upgraded steel 3/4 shift fork. Synchros were all replaced. A .002" preload was shimmed for performance/endurance driving/usage.
The trans is located in Elkton, MD (21921) and can be delivered up to 50mi from there.
$1000+core for the trans, or $1400 outright.
#67
Senior Member
iTrader: (3)
Join Date: Jul 1999
Location: Mechanicsburg, PA
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
Re: Third Gen Swap Meet!!
Hello everybody,
I still looking for some parts:
1 Kumho 245/50/16 with 50% or more tread. Prefer the 711 but let me know if you have anything.
Front bumper cover and 2 front fenders for a 92 T/A.
Black coupe carpet and door panels for 91-92
I still have some parts that GOTTA GO too!!
Fiberglass targa/notch style hatch back. Needs paint and a piece of glass. $175
Factory rear glass hatch in red w/defrost. $40
Factory base V6 hood in pretty good shape in red. $50
I still looking for some parts:
1 Kumho 245/50/16 with 50% or more tread. Prefer the 711 but let me know if you have anything.
Front bumper cover and 2 front fenders for a 92 T/A.
Black coupe carpet and door panels for 91-92
I still have some parts that GOTTA GO too!!
Fiberglass targa/notch style hatch back. Needs paint and a piece of glass. $175
Factory rear glass hatch in red w/defrost. $40
Factory base V6 hood in pretty good shape in red. $50
#69
Member
iTrader: (5)
Join Date: Aug 2005
Location: forest hill md
Posts: 293
Likes: 0
Received 2 Likes
on
2 Posts
Car: 89 formula
Engine: 305tpi
Transmission: t-56
Axle/Gears: ford 9" 4.11s
Re: Third Gen Swap Meet!!
i have a set of front and rear canuck motor sports lowering springs that i just replaced with a set or moroso trick springs and v6 springs, i paid 170$ for them last year ill sell them for 50$plus shipping, im also looking for a set of black door panels for power windows and locks, if anyone has a set and would like to trade let me know
#70
Senior Member
Join Date: Sep 2000
Location: Annapolis, Maryland
Posts: 885
Likes: 0
Received 1 Like
on
1 Post
Car: 1985 Camaro
Engine: 565 BBC
Transmission: Glide
Axle/Gears: 9 inch/spool/3.70
Re: Third Gen Swap Meet!!
Hey raptor80dad does the motor come with all the wiring? I am asking for a guy at work that wants to do a swap so all info would be great.
#71
Senior Member
iTrader: (2)
Join Date: Aug 1999
Location: Elkton MD, USA
Posts: 858
Likes: 0
Received 6 Likes
on
4 Posts
Car: 1985 Camaro Z28, VIN F
Engine: 427 sbc, HSR
Transmission: T-56, self rebuilt 700+ hp
Axle/Gears: Moser 12bolt, 3.42 trutrac
WTB: LT1 T56 bellhousing with slave extension.
I need a LT1-T56 bellhousing if anyone has or runs across one. I need the slave extension with the bellhousing also.
thanks
mike
thanks
mike
#72
Senior Member
iTrader: (2)
Join Date: May 2002
Location: Chester, VA
Posts: 731
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 GTA
Engine: L-98
Transmission: T-56
Re: Third Gen Swap Meet!!
no leads on a bell but you can get the slave adapter/bracket from GM parts direct P/N: 12523315
Its listed at $28
there was another place that had them (slave adapter) for $13 but I cant seem to locate where that was
EDIT: found it http://www.autogear.net/warnergearT56.htm
Its listed at $28
there was another place that had them (slave adapter) for $13 but I cant seem to locate where that was
EDIT: found it http://www.autogear.net/warnergearT56.htm
Last edited by arrowcamaro; 03-14-2008 at 07:02 PM.
#73
Junior Member
iTrader: (1)
Join Date: Feb 2008
Location: mechanicsville, md
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro Vert, 91 RS
Engine: 355ci
Transmission: TKO 500
Axle/Gears: 10 Bolt 3.73 posi
Re: Third Gen Swap Meet!!
i have a 305Tbi 109k on it ran good, no smoke, best offer takesit. I'm tired of tripping over it. reply to fordspanker@msn.com
#74
Junior Member
iTrader: (1)
Join Date: Feb 2008
Location: mechanicsville, md
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro Vert, 91 RS
Engine: 355ci
Transmission: TKO 500
Axle/Gears: 10 Bolt 3.73 posi
Re: Third Gen Swap Meet!!
just cleaned my garage today, I've got some misc. black seat belts, a t-top bag, a tonue cover, a set of 4th gen door panels(grey leather) with switches, and a 4th gen rear seat back (gray leather it's all going to the dump if not claimed. I also have an 86 thats getting ready to be towed to the bone yard not much left to it but if you need something let me know.(the car has no drivetrain)
#75
Senior Member
Join Date: Apr 2001
Location: Diamondhead, MS
Posts: 940
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 20th Ann. TA
Engine: Turbo 3.8 V6
Transmission: 200 4R
Axle/Gears: 3.27
Re: Third Gen Swap Meet!!
I have 2 sets of T-Tops I need to get rid of. I know one set was a large pin, might be both. Haven't pulled them out in years. I think one had a bag also. They were in decent condition. I don't remember having keys for either set.
$40 for all. Come and get them, no shipping. If I get a chance, I'll pull them out and snap some pics.
Have some misc TTA stuff also. Mainly tune up stuff and some stock parts. I'd have to check though. I know I have the stock injectors and stock D5 converter.
$40 for all. Come and get them, no shipping. If I get a chance, I'll pull them out and snap some pics.
Have some misc TTA stuff also. Mainly tune up stuff and some stock parts. I'd have to check though. I know I have the stock injectors and stock D5 converter.
#76
Member
iTrader: (2)
Join Date: Mar 2007
Location: Centreville, MD
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Firebird
Engine: 2.8
Transmission: 700R4
Axle/Gears: 3.42s
Re: Third Gen Swap Meet!!
Looking for a running 2.8 MPFI and 700r4 to go in my 86 bird. I live on the eastern shore of MD. Preferrably wanting something close.
#77
Member
iTrader: (5)
Join Date: Aug 2005
Location: forest hill md
Posts: 293
Likes: 0
Received 2 Likes
on
2 Posts
Car: 89 formula
Engine: 305tpi
Transmission: t-56
Axle/Gears: ford 9" 4.11s
Re: Third Gen Swap Meet!!
this isnt really 3rd gen related but i have to sell it to fund my 3rd gen
i have a 98 cherokee sport for sale 145k 4.0 motor runs good needs tires and a battery , something wrong witht the hood latch, only the secondary latch works, damage to the drivers side rear door and rocker panel, its green. has power everything, id say its in decent shape, looking for 1700$ obo
i have a 98 cherokee sport for sale 145k 4.0 motor runs good needs tires and a battery , something wrong witht the hood latch, only the secondary latch works, damage to the drivers side rear door and rocker panel, its green. has power everything, id say its in decent shape, looking for 1700$ obo
#78
Member
iTrader: (5)
Join Date: Oct 2007
Location: Hollyrock MD
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 formula
Engine: 350 goin carb
Transmission: 700r4
Re: Third Gen Swap Meet!!
HOLA!
i have out of a 88 firebird:
tpi set up w/9th injector (no harness or cpu)
pair of 083 heads ported (slightly) 1.60 /2.02 valves done by clear water heads in FL.
misc tpi stuff (all connectors engine side
cruise controll... worked perfect.
stock torqe arm
i have out of a 88 firebird:
tpi set up w/9th injector (no harness or cpu)
pair of 083 heads ported (slightly) 1.60 /2.02 valves done by clear water heads in FL.
misc tpi stuff (all connectors engine side
cruise controll... worked perfect.
stock torqe arm
#79
Supreme Member
iTrader: (11)
Re: Third Gen Swap Meet!!
I bought a set of Motive 373 gears for 10 bolt rear end and the TA girdle with the intention of installing them for this season. However, I am in the military and they decided to ship me off to Japan pretty soon. I am not going to hang onto these things for the 2 years i will be spending over there since I cannot bring the firebird over there. These parts are brand new! Pics will be up soon.
Gears-$140 plus shipping
Girdle-$130 plus shipping
Gears-$140 plus shipping
Girdle-$130 plus shipping
Last edited by 89formula350b2l; 04-10-2008 at 07:02 PM. Reason: adding pics
#80
Member
Join Date: Mar 2007
Location: South Side Of Westmonster MD
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Z28 Camaro
Engine: TPI 305
Transmission: 5 spd
Axle/Gears: Uh, Haven't investigated this yet
Re: Third Gen Swap Meet!!
WTB cheap:
I need the AC side (Engine compartment) of the heater Box assembly to fit my 85 camaro.
I also need an AC condensor.
thanks
I need the AC side (Engine compartment) of the heater Box assembly to fit my 85 camaro.
I also need an AC condensor.
thanks
#81
Member
Join Date: Mar 2008
Location: Westminster, Maryland
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z
Engine: 383ci SBC
Transmission: 700r4
Re: Third Gen Swap Meet!!
WTS: 355ci early model mild performnce 350.
Would prefer to trade for a L98, and would prefer to deal locally
https://www.thirdgen.org/forums/engi...nce-355ci.html
Would prefer to trade for a L98, and would prefer to deal locally
https://www.thirdgen.org/forums/engi...nce-355ci.html
#82
Member
iTrader: (2)
Join Date: May 2002
Location: Frederick, MD
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 z28, 87 IROC, 88 sc, 93 z28
Engine: LG4, LB9, LO3, LT1
Transmission: 700r4, T5, 700r4, 4L60
Axle/Gears: 3.73, 3.45, 2.73, 3.42
Moving sale
My job is taking me to a project in tennessee for 4 years or so and I have a lot of parts i need to sell before I go. A lot of these parts are also listed in the classified boards.
Hooker 2460 Jet hot sterling coated headers 1 5/8 primaries 3 inch collectors. they are brand new never mounted. cost me $350 sell for $275
4th gen dash from my 93 z28 in great shape with cluster. $150
4th gen seats grey/charcoal good shape no tears $200
87 tpi intake complete with tb injectors etc $200
ls1 driveshaft bought brand new used for less than one week, like new condition aluminum 3 inch, complete $150
010 high nickel 350 4 bolt main block, hot tanked and magnafluxed, checked out ok ($110 worth of work). will sell with a 10/10 crank that is ready to go all for $150
intrax front springs 2 inch drop
eibach sportline rear springs with 1 coil cut off all for $100
700r4 from my 93 z28. complete overhaul 20k miles ago. workerd great when removed.
I will add more as I look around. I will be moving within the next few weeks so please contact me asap if you are interested in any of these parts.
Thanks
Hooker 2460 Jet hot sterling coated headers 1 5/8 primaries 3 inch collectors. they are brand new never mounted. cost me $350 sell for $275
4th gen dash from my 93 z28 in great shape with cluster. $150
4th gen seats grey/charcoal good shape no tears $200
87 tpi intake complete with tb injectors etc $200
ls1 driveshaft bought brand new used for less than one week, like new condition aluminum 3 inch, complete $150
010 high nickel 350 4 bolt main block, hot tanked and magnafluxed, checked out ok ($110 worth of work). will sell with a 10/10 crank that is ready to go all for $150
intrax front springs 2 inch drop
eibach sportline rear springs with 1 coil cut off all for $100
700r4 from my 93 z28. complete overhaul 20k miles ago. workerd great when removed.
I will add more as I look around. I will be moving within the next few weeks so please contact me asap if you are interested in any of these parts.
Thanks
#83
Junior Member
Join Date: Apr 2007
Location: Alamogordo New Mexico
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Chevy Camaro
Engine: 5.7L 440hp 450FBT
Transmission: WC T-5
Axle/Gears: 3.73 Rear end
Re: window regulators & seats
Do you still have the windoe regulators. IF you do Send me a pic syncom9@msn.com and is that 50 plus shipping
#84
Re: Third Gen Swap Meet!!
I am looking for a front parking brake cable that will fit a 90 formula with rear discs. The cable is the one that comes from the lever and connects to the two rear cables. If any1 has 1 please let me know so I can get my bird inspected and on the road. I am located in Baltimore.
#86
Supreme Member
iTrader: (3)
Join Date: Oct 2005
Location: Cincinatti OH
Posts: 1,833
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 L03 700r4 RS
Engine: 1987 WS6 Trans AM Lb2
Transmission: Th350 red neck Performance 3k stall
Axle/Gears: 95 Mustang 8.8 built with 3.73s
Re: Third Gen Swap Meet!!
Pics of the ET streets? If they still have some life left in them I'll take em.
#87
Re: Third Gen Swap Meet!!
I am looking for a decent condition '91 or '92 Firebird that I can pull some body parts off of. Can be smashed up in the back, don't need any of those. PM me, I'm in Virginia Beach.
#88
Senior Member
iTrader: (2)
Join Date: Aug 1999
Location: Elkton MD, USA
Posts: 858
Likes: 0
Received 6 Likes
on
4 Posts
Car: 1985 Camaro Z28, VIN F
Engine: 427 sbc, HSR
Transmission: T-56, self rebuilt 700+ hp
Axle/Gears: Moser 12bolt, 3.42 trutrac
LS1/GTO T56, LT1 T56
I have a LS1/GTO spec T56 on the classifieds:
"https://www.thirdgen.org/forums/engine-drivetrain-parts-sale/479502-ls1-gto-t56-built.html"
Build for ~700hp, and can be adapted to a T5 setup.
Also have another stock-rebuild LT1-T56 that will be finished next week.
Still another 3 LS1s, 4 LT1s, and 1 viper to rebuild, if anyone wants a custom rebuild.
thanks
mike
"https://www.thirdgen.org/forums/engine-drivetrain-parts-sale/479502-ls1-gto-t56-built.html"
Build for ~700hp, and can be adapted to a T5 setup.
Also have another stock-rebuild LT1-T56 that will be finished next week.
Still another 3 LS1s, 4 LT1s, and 1 viper to rebuild, if anyone wants a custom rebuild.
thanks
mike
Last edited by 85MikeTPI; 06-10-2008 at 10:51 AM.
#90
Member
Join Date: Jan 2006
Location: So.MD
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92rs
Engine: 350
Transmission: 350
Axle/Gears: 3.73/Moser 12bolt
Re: Third Gen Swap Meet!!
set of IROC rims good condition,need to be stripped and re-cleared to shine again.
Set of MT drag radials with 4-5 runs on them on rear (255/60-16).
front tires old but have tread.
$325/obo pick up only .I'm in southern MD
Set of MT drag radials with 4-5 runs on them on rear (255/60-16).
front tires old but have tread.
$325/obo pick up only .I'm in southern MD
#91
Senior Member
iTrader: (3)
Join Date: Jul 1999
Location: Mechanicsburg, PA
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
Re: Third Gen Swap Meet!!
I have a nice un molested 1991 Trans Am front bumper support. It is straight with all lights intact. It has both turn signals and fog lights in good condition. It came from a white car and it is cherry. I don't really want to ship this but if you really need it I'm sure we can work that out. I prefer pickup in north eastern Maryland. Let me know if you have any nice aftermarket parts for a 1989 Formula 350.
#92
Senior Member
iTrader: (3)
Join Date: Jul 1999
Location: Mechanicsburg, PA
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
Re: Third Gen Swap Meet!!
I have a nice un molested 1991 Trans Am front bumper support. It is straight with all lights intact. It has both turn signals and fog lights in good condition. It came from a white car and it is cherry. I don't really want to ship this but if you really need it I'm sure we can work that out. I prefer pickup in north eastern Maryland. Let me know if you have any nice aftermarket parts for a 1989 Formula 350.
#94
Senior Member
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: Third Gen Swap Meet!!
wtb cheap exhaust any useable condition, looks dont matter, just want it to be structurally sound pm me thx
#95
Junior Member
Join Date: Sep 2007
Location: bowie, MD
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Trans Am
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 2:77
Re: Third Gen Swap Meet!!
I have a hood from my 86 Trans Am, it is in great condition. pm me and make offer, pickup only(bowie,md),
#96
Re: Third Gen Swap Meet!!
I have a bunch of gray interior plastics from my GTA that I need to get rid of, including two sun visors with mirrors, and also two Kumho tires that came off the front of the car. I'm catching grief for it "taking up too much space". If it doesn't go soon I'm gonna be forced to throw this stuff out, and I don't want to have to do that. Will accept most offers.
#97
Junior Member
Join Date: Sep 2007
Location: bowie, MD
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Trans Am
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 2:77
Re: Third Gen Swap Meet!!
how much tread is left on the tires? and what size are they? im in desperate need of new front tires. i might be able to pick up thurs or fri if they good
#98
Re: Third Gen Swap Meet!!
They're 245/50ZR16's. Both have a pretty good amount of tread, but pass. side tire has some bad-alignment wear on the outer edge. I woulda kept'em on but I decided I wanted 4 of the same tires when I got the rears replaced. Lemme know, I'll be around here whenever.
#99
Junior Member
Join Date: Sep 2007
Location: bowie, MD
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Trans Am
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 2:77
Re: Third Gen Swap Meet!!
im gonna be gone for a week but can probably pick them up next saturday. you just name the price and ill take em. thanks
#100
Supreme Member
iTrader: (9)
Re: Third Gen Swap Meet!!
I have a 3.42 open/drum rear, and the speedo gears that go with the rear (if you have a VSS and not a cable driven speedo). I would $100 for it, but will consider all offers.
I also have A arms off my 91 RS that orginally came with the 16" wheel option. I installed Moog ball joints in them a little over a year ago (less then 10,000 miles ago), but they will need new bushings. These are just the thing if you are planning to keep the factory A arms. You can get these ready with new bushings, get them boxed, painted, whatever. That way, when you take out your old A arms, you can install these right away!!!!
I am located in Baltimore, MD and would like them to go to good use. I know how time consuming they are to remove, install bushings and balljoints, then re-install onto the car.
I'll consider any fair offers on them, keep in mind with the fairly new Moog balljoints, and the time/effort to remove the A arms (like from a junk yard or parts car). I will even clean them up and paint them, and install bushing of your choice if you so desire (for the price of parts). I am not able to "box" them though. I can take pics and post them if you want, but everybody knows what our A arms look like.
I also have A arms off my 91 RS that orginally came with the 16" wheel option. I installed Moog ball joints in them a little over a year ago (less then 10,000 miles ago), but they will need new bushings. These are just the thing if you are planning to keep the factory A arms. You can get these ready with new bushings, get them boxed, painted, whatever. That way, when you take out your old A arms, you can install these right away!!!!
I am located in Baltimore, MD and would like them to go to good use. I know how time consuming they are to remove, install bushings and balljoints, then re-install onto the car.
I'll consider any fair offers on them, keep in mind with the fairly new Moog balljoints, and the time/effort to remove the A arms (like from a junk yard or parts car). I will even clean them up and paint them, and install bushing of your choice if you so desire (for the price of parts). I am not able to "box" them though. I can take pics and post them if you want, but everybody knows what our A arms look like.
Last edited by krisb410; 07-17-2008 at 07:05 PM.