Got my new rims on
#1
Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
Thread Starter
Join Date: Oct 2007
Location: San Antonio, Tx
Posts: 154
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am WS6
Engine: 305 tpi
Transmission: Auto
Got my new rims on
I bought these from Duffster here on the boards, great guy. They are ZO6 replicas 18x9.5 front and 18x10.5 rear +58mm offset, i am running 245-40-18 front (wanted 275's but Duff gave me a great deal on these tires i couldnt pass it up "Thanks Duff!") and 295-35-18 on the rear. I did use 2" spacers all the way around. Car is still stock height and i dont know how i am going to lower it with the rear tires being even with the rear fender. And i hope to get a 4th gen rear in the future to lose the drums in the back.
Anyways on to the pictures.
-Buddy-
Old
![](http://www.lavaloungecreations.com/pics/ready/0.jpg)
New
![](http://www.lavaloungecreations.com/pics/ready/1.jpg)
![](http://www.lavaloungecreations.com/pics/ready/2.jpg)
Anyways on to the pictures.
-Buddy-
Old
![](http://www.lavaloungecreations.com/pics/ready/0.jpg)
New
![](http://www.lavaloungecreations.com/pics/ready/1.jpg)
![](http://www.lavaloungecreations.com/pics/ready/2.jpg)
![](http://www.lavaloungecreations.com/pics/ready/3.jpg)
#6
Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (1)
Join Date: Sep 2005
Location: Walnut, CA
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 z28 & 1992 z28
Engine: 305 TPI
Transmission: 700-R4
Re: Got my new rims on
They look great! I think they would look even better with a slight drop. Do you think you could use a thinner adapter in the rear without having to take a hammer to the wheel wells?
#7
Supreme Member
iTrader: (3)
Join Date: Sep 2006
Location: sunny so cal.
Posts: 1,531
Likes: 0
Received 1 Like
on
1 Post
Car: 1990
Engine: 305
Transmission: 700r4
Axle/Gears: stock
Re: Got my new rims on
![thumbs up](https://www.thirdgen.org/forums/images/smilies/thumbsup.gif)
Not only do I like your new rims, I like the old ones to.
Enjoy!
Trending Topics
#8
Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
Thread Starter
Join Date: Oct 2007
Location: San Antonio, Tx
Posts: 154
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am WS6
Engine: 305 tpi
Transmission: Auto
Re: Got my new rims on
![thumbs up](https://www.thirdgen.org/forums/images/smilies/thumbsup.gif)
Not only do I like your new rims, I like the old ones to.
Enjoy!
-Buddy-
#9
Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (1)
Join Date: Sep 2005
Location: Walnut, CA
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 z28 & 1992 z28
Engine: 305 TPI
Transmission: 700-R4
Re: Got my new rims on
If you can that would be great! I plan on running the same wheels and would also like to run a thinner adapter to get them tucked in more.
#10
Supreme Member
iTrader: (3)
Join Date: Sep 2006
Location: sunny so cal.
Posts: 1,531
Likes: 0
Received 1 Like
on
1 Post
Car: 1990
Engine: 305
Transmission: 700r4
Axle/Gears: stock
Re: Got my new rims on
thanks for the information.
if you go to a 4th gen rear end you will not get much except disk breaks, if you have disks on the one you buy. you are still going to have a small rear and it will be 4 inches wider than ours.
you would be better off getting an 87 cam rear end. if it has disks on it then it is posi. and it is a stronger rear end.
and are those side vents at the rear of your hood? i have never seen a camaro with those - nor a bird either.
if you go to a 4th gen rear end you will not get much except disk breaks, if you have disks on the one you buy. you are still going to have a small rear and it will be 4 inches wider than ours.
you would be better off getting an 87 cam rear end. if it has disks on it then it is posi. and it is a stronger rear end.
and are those side vents at the rear of your hood? i have never seen a camaro with those - nor a bird either.
#11
Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
Thread Starter
Join Date: Oct 2007
Location: San Antonio, Tx
Posts: 154
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am WS6
Engine: 305 tpi
Transmission: Auto
Re: Got my new rims on
thanks for the information.
if you go to a 4th gen rear end you will not get much except disk breaks, if you have disks on the one you buy. you are still going to have a small rear and it will be 4 inches wider than ours.
you would be better off getting an 87 cam rear end. if it has disks on it then it is posi. and it is a stronger rear end.
and are those side vents at the rear of your hood? i have never seen a camaro with those - nor a bird either.
if you go to a 4th gen rear end you will not get much except disk breaks, if you have disks on the one you buy. you are still going to have a small rear and it will be 4 inches wider than ours.
you would be better off getting an 87 cam rear end. if it has disks on it then it is posi. and it is a stronger rear end.
and are those side vents at the rear of your hood? i have never seen a camaro with those - nor a bird either.
-Buddy-
#12
Supreme Member
iTrader: (3)
Join Date: Sep 2006
Location: sunny so cal.
Posts: 1,531
Likes: 0
Received 1 Like
on
1 Post
Car: 1990
Engine: 305
Transmission: 700r4
Axle/Gears: stock
Re: Got my new rims on
well that is something else i learned today. went and did some research and there were a few like that. need them for my camaro.
#13
Member
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Got my new rims on
Iv always wanted to see Zo6s on a T/A..looks pretty sweet.
Thread
Thread Starter
Forum
Replies
Last Post
LiquidBlue
Wheels and Tires
32
12-10-2019 04:06 PM