will these LS swap engine mounts work?
02-12-2012 | 06:55 AM
#1
Thread Starter
Joined: Feb 2008
Posts: 504
Likes: 1
From: newfoundland canada
Car: 1989 camaro rs
Engine: ls 5.3 carb
Transmission: t56 six speed
Axle/Gears: 3:73
will these LS swap engine mounts work?
hey guys i was wondering if you might know if these Moroso LS Series Motor Mount Adapter Plates will work with my older style engine mounts? any info will help, thanks
02-12-2012 | 07:18 AM
#2
Member
Joined: Apr 2004
Posts: 131
Likes: 0
From: Mississauga, Ontario, Canada
Car: 1984 Chevrolet Camaro Z28
Engine: Carb'd LT1 w/ a Cam :)
Transmission: T56
Axle/Gears: Moser 9" w/ 3.75 gears
Re: will these work?
hey guys i was wondering if you might know if these Moroso LS Series Motor Mount Adapter Plates will work with my older style engine mounts? any info will help, thanks
Attachment 234136
Attachment 234136
02-13-2012 | 04:10 PM
#4
Moderator
iTrader: (14)
Joined: Mar 2000
Posts: 43,169
Likes: 36
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
I used a different brand, but same concept.
Only hitch is you can't use the LS1 AC compressor with them.
Only hitch is you can't use the LS1 AC compressor with them.
02-13-2012 | 04:29 PM
#6
Supreme Member
iTrader: (5)
Joined: Jan 2002
Posts: 13,622
Likes: 3
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
Re: will these LS swap engine mounts work?
bolt holes aren't staggered they won't fit properly. You need ones like the car shop inc 1" setback plates
Trending Topics
02-13-2012 | 06:25 PM
#8
Supreme Member
iTrader: (4)
Joined: Mar 2009
Posts: 3,079
Likes: 3
From: Pepperell, MA
Car: 1987 Trans Am
Engine: LQ9/L92
Transmission: 4L60E
Re: will these LS swap engine mounts work?
the non-setbacks work, you just gotta notch more outta the kmember. i used them on my 5.3L. however, if you havent bought anything yet, go with the 1" setbacks, it'll put your engine and trans where they belong.
02-13-2012 | 08:11 PM
#9
Thread Starter
Joined: Feb 2008
Posts: 504
Likes: 1
From: newfoundland canada
Car: 1989 camaro rs
Engine: ls 5.3 carb
Transmission: t56 six speed
Axle/Gears: 3:73
Re: will these LS swap engine mounts work?
cant i just set my holes back 1" ? that should do the same thing? i want everything to go just as it was in the beginning, thanks guys for the help
02-14-2012 | 06:54 AM
#10
Supreme Member
iTrader: (4)
Joined: Mar 2009
Posts: 3,079
Likes: 3
From: Pepperell, MA
Car: 1987 Trans Am
Engine: LQ9/L92
Transmission: 4L60E
Re: will these LS swap engine mounts work?
if you buy the right ones the first time, you dont have to mod. if you're going to buy the plates, get the 1" setback ones and be done.
02-14-2012 | 07:20 AM
#11
Thread Starter
Joined: Feb 2008
Posts: 504
Likes: 1
From: newfoundland canada
Car: 1989 camaro rs
Engine: ls 5.3 carb
Transmission: t56 six speed
Axle/Gears: 3:73
Re: will these LS swap engine mounts work?
I hear ya, but I love to fabricate and weld so makeing my own would just be fun, but you are right, if i was to buy them, get the right ones the first time, im looking for measurements and info to make it a little easier. thanks
Last edited by camarozz383; 02-14-2012 at 07:27 AM.
02-14-2012 | 07:27 AM
#12
Supreme Member
iTrader: (4)
Joined: Mar 2009
Posts: 3,079
Likes: 3
From: Pepperell, MA
Car: 1987 Trans Am
Engine: LQ9/L92
Transmission: 4L60E
Re: will these LS swap engine mounts work?
if that's the case, i know i've seen dimensions somewhere over on 'tech for building your own swap plates. just can't seem to find them at the moment.....
Thread
Thread Starter
Forum
Replies
Last Post
