92 Camaro vats lock cylinder
#1
Junior Member
Thread Starter
Join Date: May 2003
Location: Cincinnati area
Posts: 79
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Iroc-Z / 1992 RS
Engine: 5.7 TPI / L03 TBI
Transmission: 700r-4 / 700r-4
Axle/Gears: 9 bolt 2.77 posi / 10 bolt 2.73
92 Camaro vats lock cylinder
One of the two white wires broke. I taped it up and seem to be okay for awhile. Now its causing problems with the car. I know how to replace the lock cylinder. But don't know what else I need to do for everything to work right. I assume that I will need to get the resistance reading from my key. Get a new key blank with that resistance. Then get that key cut to the new key that comes with the lock cylinder?
Is this what needs to be done or is that wrong way?
Is this what needs to be done or is that wrong way?
#2
Junior Member
iTrader: (3)
Join Date: Sep 2005
Location: NOVA
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 IROC-Z
Engine: lb9
Transmission: t56
Axle/Gears: 3.73
Re: 92 Camaro vats lock cylinder
i went to a locksmith with my old key and the key that came with the lock cylinder and had the guy measure the resistance and then cut the new key into a blanck with the same resistance as the old key. It worked great.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
Zachattack0925
Tech / General Engine
2
08-12-2015 09:54 PM
Zachattack0925
Transmissions and Drivetrain
4
08-12-2015 09:52 PM