[FL] 1991 Pontiac Firebird interior parts
#1
Thread Starter
Member
Joined: Sep 2011
Posts: 152
Likes: 0
From: Florida
Car: 1991 Pontiac Firebird Trans Am
Engine: 1987 Chevy 355 TPI Mild Cam
Transmission: 5-Speed T-5 WC
Axle/Gears: 3.42
1991 Pontiac Firebird interior parts
Hey all,
I need a black carpet, black door panels and any black plastic parts. I would like a carpet in pretty good condition. Also if anyone has a center console from a 2002 or so camaro for a manual I would like that as well.
Thanks
I need a black carpet, black door panels and any black plastic parts. I would like a carpet in pretty good condition. Also if anyone has a center console from a 2002 or so camaro for a manual I would like that as well.
Thanks
#2
Joined: Aug 1999
Posts: 5,077
Likes: 375
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: 1991 Pontiac Firebird interior parts
I've got a set of black plastics, Black Door Panels, Might have a rug, & I've got the fourth gen center console too. It's got a 5-speed shifter pattern on the bezel. ( sorry - no pics yet. )
There are several questions about your car's options that are important to know to be sure that you get the right plastic parts for your ride. If your interested than post your ZIP code for shipping quotes and additional info.
There are several questions about your car's options that are important to know to be sure that you get the right plastic parts for your ride. If your interested than post your ZIP code for shipping quotes and additional info.
#4
Thread Starter
Member
Joined: Sep 2011
Posts: 152
Likes: 0
From: Florida
Car: 1991 Pontiac Firebird Trans Am
Engine: 1987 Chevy 355 TPI Mild Cam
Transmission: 5-Speed T-5 WC
Axle/Gears: 3.42
Re: 1991 Pontiac Firebird interior parts
I am interested, zip is 32114 or 29681 whichever one is cheaper. (college student haha)
What do you mean by options for the interior plastics? It is a 91 Trans am, they told me it was a GTA when I bought it but I don't think it is.
What do you mean by options for the interior plastics? It is a 91 Trans am, they told me it was a GTA when I bought it but I don't think it is.
#5
Joined: Aug 1999
Posts: 5,077
Likes: 375
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: 1991 Pontiac Firebird interior parts
I don't have time to get shipping info right now, but wanted to post some questions while I had a little time to write.
Does your car have T-Tops
Does your car have a Light mounted in the Rear Hatch Panel
Does your car have an electrical "contact panel" hole in the top of the rear hatch panel ? (for 3rd brake light, rear wiper, or other hatch mounted potion)
Does your car use a Hatch "Roll-UP" shade ??
If your car is a 91 than it should have rear shoulder belts. There should also be a small housing on the headliner trim panel for the internal 3rd brake light. It may - or may not - have an optional hard plastic, locking hatch-well storage cover. ( I do NOT have this option for 86+ cars ) All the 88+ ( or 89+?) black rear shoulder belt plastic panels that I have are the NON-carpeted version.
Let me know about your cars options and I'll see what parts I've got that will match up to your needs. Then I'll deal with getting some shipping estimates for Ya' !
Does your car have T-Tops
Does your car have a Light mounted in the Rear Hatch Panel
Does your car have an electrical "contact panel" hole in the top of the rear hatch panel ? (for 3rd brake light, rear wiper, or other hatch mounted potion)
Does your car use a Hatch "Roll-UP" shade ??
If your car is a 91 than it should have rear shoulder belts. There should also be a small housing on the headliner trim panel for the internal 3rd brake light. It may - or may not - have an optional hard plastic, locking hatch-well storage cover. ( I do NOT have this option for 86+ cars ) All the 88+ ( or 89+?) black rear shoulder belt plastic panels that I have are the NON-carpeted version.
Let me know about your cars options and I'll see what parts I've got that will match up to your needs. Then I'll deal with getting some shipping estimates for Ya' !
#6
Banned
iTrader: (5)
Joined: Oct 2012
Posts: 90
Likes: 0
From: Maryland
Car: Camaro
Engine: 350
Transmission: 6 Speed
Axle/Gears: 9 bolt 370
Re: 1991 Pontiac Firebird interior parts
More parts at
http://www.facebook.com/ThisWeekInCamaro
443-527-9573 Jason
#7
Thread Starter
Member
Joined: Sep 2011
Posts: 152
Likes: 0
From: Florida
Car: 1991 Pontiac Firebird Trans Am
Engine: 1987 Chevy 355 TPI Mild Cam
Transmission: 5-Speed T-5 WC
Axle/Gears: 3.42
Re: 1991 Pontiac Firebird interior parts
Ok, yes I do have T-Tops, I do have a light mounted in the rear hatch panel, yes I do have the 3rd brake light and yes I do have the hatch roll-up shade.
And yes it has the rear shoulder belts, but no locking hatch well storage and I would prefer the non-carpeted panels.
And yes it has the rear shoulder belts, but no locking hatch well storage and I would prefer the non-carpeted panels.
Trending Topics
#8
Joined: Aug 1999
Posts: 5,077
Likes: 375
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: 1991 Pontiac Firebird interior parts
Yup,....
I've got the exact panels that your looking for. A Black Plastic Interior Conversion is $250 + shipping. The drivers side hatch panel pictured above has the correct provisions for your car. I've got the pass side that matches as well as a rear hatch panel that matches the options your car has. (PPD hatch motor, T-Tops, with light )
Parts for 91 Firebird include: ( **non-carpeted panels )
door sills (2, L&R)
kick panels (2, L&R)
Headliner trim ( 3rd brake )
Hatchback trim ( roll-up shade)
Rear Hatch Panel ( T-Tops, Light, PPD )
Pass hatch panel ( rear shoulder, roll-up )
Driver Hatch Panel ( rear shoulder, roll-up )
Spare Tire Panel
Rear Seat Arm rest (2, L&R, rear shoulder belt )
Rear Seat Belt covers (2, L&R)
Black Plastic Hardware
** No Center console and no "soft" parts
Shipping estimate for the interior panels is $135. This is a close estimate based on the size of previously shipped plastic conversions. Because that package would so big, it is possible to also include door panels in the package. An exact shipping QUOTE will be provided ONLY once the parts are packed for shipping so it's as accurate as possible.
The black Trans Am Door Panels pictured above are $175 and the 98-02 center console is $125 + shipping. The console includes a 5 Speed Bezel, the Ashtray, the Lighter, and a Console Pad. ( The factory Coin Holder is an extra $15 ) If you bought the plastic panels, the door panels and the console together I'd reduce the prices a bit.
I did not get a shipping quote for the center console. I do not think it can be shipped with the interior plastics. I will check; but I think it would need to be shipped separate to ensure that the size limits are not exceeded. While taking this pic I found that 1 of the ash tray door pins is missing and needs to be replaced. Opens and closes - but needs a pin so it works smoothly again.
Send me a PM for the remaining details if your seriously interested.
I've got the exact panels that your looking for. A Black Plastic Interior Conversion is $250 + shipping. The drivers side hatch panel pictured above has the correct provisions for your car. I've got the pass side that matches as well as a rear hatch panel that matches the options your car has. (PPD hatch motor, T-Tops, with light )
Parts for 91 Firebird include: ( **non-carpeted panels )
door sills (2, L&R)
kick panels (2, L&R)
Headliner trim ( 3rd brake )
Hatchback trim ( roll-up shade)
Rear Hatch Panel ( T-Tops, Light, PPD )
Pass hatch panel ( rear shoulder, roll-up )
Driver Hatch Panel ( rear shoulder, roll-up )
Spare Tire Panel
Rear Seat Arm rest (2, L&R, rear shoulder belt )
Rear Seat Belt covers (2, L&R)
Black Plastic Hardware
** No Center console and no "soft" parts
Shipping estimate for the interior panels is $135. This is a close estimate based on the size of previously shipped plastic conversions. Because that package would so big, it is possible to also include door panels in the package. An exact shipping QUOTE will be provided ONLY once the parts are packed for shipping so it's as accurate as possible.
The black Trans Am Door Panels pictured above are $175 and the 98-02 center console is $125 + shipping. The console includes a 5 Speed Bezel, the Ashtray, the Lighter, and a Console Pad. ( The factory Coin Holder is an extra $15 ) If you bought the plastic panels, the door panels and the console together I'd reduce the prices a bit.
I did not get a shipping quote for the center console. I do not think it can be shipped with the interior plastics. I will check; but I think it would need to be shipped separate to ensure that the size limits are not exceeded. While taking this pic I found that 1 of the ash tray door pins is missing and needs to be replaced. Opens and closes - but needs a pin so it works smoothly again.
Send me a PM for the remaining details if your seriously interested.
#9
Banned
iTrader: (5)
Joined: Oct 2012
Posts: 90
Likes: 0
From: Maryland
Car: Camaro
Engine: 350
Transmission: 6 Speed
Axle/Gears: 9 bolt 370
Re: 1991 Pontiac Firebird interior parts
UOTE=Termanalor117;5479649]Hey all,
I need a black carpet, black door panels and any black plastic parts. I would like a carpet in pretty good condition. Also if anyone has a center console from a 2002 or so camaro for a manual I would like that as well.
Thanks[/QUOTE]
443-527-9573- jason
http://www.facebook.com/ThisWeekInCamaro
I need a black carpet, black door panels and any black plastic parts. I would like a carpet in pretty good condition. Also if anyone has a center console from a 2002 or so camaro for a manual I would like that as well.
Thanks[/QUOTE]
443-527-9573- jason
http://www.facebook.com/ThisWeekInCamaro
#10
Thread Starter
Member
Joined: Sep 2011
Posts: 152
Likes: 0
From: Florida
Car: 1991 Pontiac Firebird Trans Am
Engine: 1987 Chevy 355 TPI Mild Cam
Transmission: 5-Speed T-5 WC
Axle/Gears: 3.42
Re: 1991 Pontiac Firebird interior parts
Hey sorry to drop off the face of the earth, do you still have these parts?
#11
Joined: Aug 1999
Posts: 5,077
Likes: 375
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: 1991 Pontiac Firebird interior parts
I should still have most of them. I've used/sold some of the black interior stuff that I had but should still be able to complete a full set of interior panels. ( just might not be the exact piece pictures a few months ago. ) I know I've still got the4th gen center console pictured.....
#12
Thread Starter
Member
Joined: Sep 2011
Posts: 152
Likes: 0
From: Florida
Car: 1991 Pontiac Firebird Trans Am
Engine: 1987 Chevy 355 TPI Mild Cam
Transmission: 5-Speed T-5 WC
Axle/Gears: 3.42
Re: 1991 Pontiac Firebird interior parts
Alright, as long as they are good condition that's all I care about. Would you be interested in my old tan interior parts for a deduction in price?
#13
Banned
iTrader: (5)
Joined: Oct 2012
Posts: 90
Likes: 0
From: Maryland
Car: Camaro
Engine: 350
Transmission: 6 Speed
Axle/Gears: 9 bolt 370
Re: 1991 Pontiac Firebird interior parts
#14
Joined: Aug 1999
Posts: 5,077
Likes: 375
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: 1991 Pontiac Firebird interior parts
I will not ship anything that I would not use myself. I would also be sending pictures of the parts you would receive once we reach an agreement and I can pull all the parts out. All the details I previously oulined are still accurate. (I never got a shipping quote for the center console so if you need that I will have to get a shipping quote for it. ) When your ready just send me a PM to get the ball rolling.
P.S, Not really interested in the Tan plastics. The expense of shipping parts that I really don't need forces me to decline the offer.
P.S, Not really interested in the Tan plastics. The expense of shipping parts that I really don't need forces me to decline the offer.
#15
Member
iTrader: (9)
Joined: Feb 2005
Posts: 166
Likes: 0
From: FRESNO CA.
Car: DEPENDS ON WHAT DAY IT IS
Engine: 428 STROKED TO 462
Transmission: 6 SPEED
Re: 1991 Pontiac Firebird interior parts
I have 2 very nice black carpet sets if you still need carpet, Not gonna jump in on the black plastics competition you already have two very good sources there, but I didn't see a mention of the black carpet. I have one original with padding set up and one replacement set up with no padding. both are nice and bright (ok thats a hell of a oxymoron) black
#17
Thread Starter
Member
Joined: Sep 2011
Posts: 152
Likes: 0
From: Florida
Car: 1991 Pontiac Firebird Trans Am
Engine: 1987 Chevy 355 TPI Mild Cam
Transmission: 5-Speed T-5 WC
Axle/Gears: 3.42
Re: 1991 Pontiac Firebird interior parts
Also if you have a drivers floor pan let me know thanks
#19
Joined: Aug 1999
Posts: 5,077
Likes: 375
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: 1991 Pontiac Firebird interior parts
Ya' He 'dropped off the face of the earth' again so most of the parts I listed here are still available. ( The 4th gen console was SOLD ) Send me a PM with a list of stuff that you need and your ZIP code and I'll reply with as much info as possible.
#20
Banned
iTrader: (5)
Joined: Oct 2012
Posts: 90
Likes: 0
From: Maryland
Car: Camaro
Engine: 350
Transmission: 6 Speed
Axle/Gears: 9 bolt 370
Re: 1991 Pontiac Firebird interior parts
#21
Senior Member
iTrader: (6)
Joined: May 2005
Posts: 751
Likes: 0
From: Beech Bluff,TN
Car: 1991 Trans Am Convertible
Engine: 305 TPI
Transmission: T5
Axle/Gears: 3:08
Re: 1991 Pontiac Firebird interior parts
#23
Banned
iTrader: (5)
Joined: Oct 2012
Posts: 90
Likes: 0
From: Maryland
Car: Camaro
Engine: 350
Transmission: 6 Speed
Axle/Gears: 9 bolt 370
Re: 1991 Pontiac Firebird interior parts
Had some health problem's .Made alot of changes in business , So never happens again,
If not shipped in 3 business Days its free.(Unless other wise stated)
443-527-9573 Jason @ TGC Ship World Wide
www.facebook.com/ThisWeekInCamaro
#24
Junior Member
Joined: Jul 2011
Posts: 90
Likes: 0
From: NEPA
Car: 86 Camaro Coupe
Engine: currently building a 355
Transmission: unsure what it will end up with
Axle/Gears: 10 Bolt 2.73
Re: 1991 Pontiac Firebird interior parts
Do you still need any of the black plastic interior pieces? I have a bunch listed in the interior for sale thread under Black Plastics. If you want any of them send me a pm with a list of what ones and Ill get a shipping price and pm you back the same day or next day.
Thread
Thread Starter
Forum
Replies
Last Post
colton_carlson
Firebirds for Sale
7
03-08-2019 12:21 PM
1992 Trans Am
Engine/Drivetrain/Suspension Parts for Sale
1
08-08-2015 08:16 PM