[OH] Parting out 91RS - MINT Dash pad
#1
Thread Starter
Member
Joined: Jul 2002
Posts: 144
Likes: 0
From: Ohio
Car: 1991 RS
Engine: 406 in progress
Transmission: th350
Parting out 91RS - MINT Dash pad
Got a 73 camaro, and that means that the 91s gotta go. Nobody was interested in buying a roller, so I am parting out my 91. I will post this in stages as I get stuff taken off - if there is anything you need that you dont see here, just ask - I have it all, and most of it is in pretty good shape.
I will update items as pricing below, as I get it all figured out. Buyer is responsible for shipping charges. I prefer paypal or cash in person. Items will be listed here first, but will go to ebay after a few days if they are not sold on here.
I have the entire dash for sale in addition to the pad. There are various parts pictured below.
Interior plastic set is in good shape. I will get images up soon, the only piece not included is the driver side rocker panel cover - i'm having issues getting it out.
MINT Dash Pad - $200 [SOLD]
Main dash section - $150
Center console -$50 (Does not include lid - lid was garbage)
Lower dash mount - $50
Assorted dash trim pieces - $100
Front seats - $75
Rear seat - $75
shifter - $50
guage cluster - $75 [SOLD]
guage cluster trim - $25
Interior Plastic Set -$250
Feel free to make offers on anything - remember its going on ebay if nobody here wants it. I wont be offended by any offer, but I will also reserve the right not to accept an offer (but likely no reasonable offer will be declined).
I will update items as pricing below, as I get it all figured out. Buyer is responsible for shipping charges. I prefer paypal or cash in person. Items will be listed here first, but will go to ebay after a few days if they are not sold on here.
I have the entire dash for sale in addition to the pad. There are various parts pictured below.
Interior plastic set is in good shape. I will get images up soon, the only piece not included is the driver side rocker panel cover - i'm having issues getting it out.
MINT Dash Pad - $200 [SOLD]
Main dash section - $150
Center console -$50 (Does not include lid - lid was garbage)
Lower dash mount - $50
Assorted dash trim pieces - $100
Front seats - $75
Rear seat - $75
shifter - $50
guage cluster - $75 [SOLD]
guage cluster trim - $25
Interior Plastic Set -$250
Feel free to make offers on anything - remember its going on ebay if nobody here wants it. I wont be offended by any offer, but I will also reserve the right not to accept an offer (but likely no reasonable offer will be declined).
Last edited by acidpad; 05-29-2009 at 06:09 PM.
#7
Member
iTrader: (2)
Joined: Mar 2009
Posts: 148
Likes: 0
From: Detroit, Michigan
Car: 1989 Camaro RS
Engine: 305 TBI
Transmission: 700R4
Re: Parting out 91RS - MINT Dash pad
I need a set of front quarter panels, and a driver door. Yours look kinda rusted a bit, but that's okay. I'll give you 100 bucks cash and can come pick them up as soon as my paycheck comes through. I'll pm you my #, and we can negotiate, set up date and time.
Trending Topics
#8
Thread Starter
Member
Joined: Jul 2002
Posts: 144
Likes: 0
From: Ohio
Car: 1991 RS
Engine: 406 in progress
Transmission: th350
Re: Parting out 91RS - MINT Dash pad
I do have the roll shade, its a bit faded but otherwise in good shape. I'll get pictures and shipping info for you tomorrow.
#10
Re: Parting out 91RS - MINT Dash pad
two questions. What part of Ohio do u live? Im in the Cleveland area. and is the steering column a PASS-KEY security ignition or no? if not ill take it as long as its in good condition and under $100 also might be interested in a few other items as well. (Ground effectcs, nose w/ the reinforcement grid, driver fender, and driver door handle pieces) as long as the prices are good
#11
Thread Starter
Member
Joined: Jul 2002
Posts: 144
Likes: 0
From: Ohio
Car: 1991 RS
Engine: 406 in progress
Transmission: th350
Re: Parting out 91RS - MINT Dash pad
I'm in toledo. The steering column is a pass-key security ignition. I'll get pictures of the other pieces up tonight (hopefully). I've got someone thats getting the rolling body mostly for the sheet metal after its parted out - but in any case, i'll get pictures up an we'll figure out whats still available.
#12
Thread Starter
Member
Joined: Jul 2002
Posts: 144
Likes: 0
From: Ohio
Car: 1991 RS
Engine: 406 in progress
Transmission: th350
Re: Parting out 91RS - MINT Dash pad
fbodyman - Mine is the canvas rollshade, not the vinyl, it is faded blue. I'll try to get pics on tonight.
price with shipping would be $50. I've got someone else interested too, so let me know if you wanted it - you did post first.
price with shipping would be $50. I've got someone else interested too, so let me know if you wanted it - you did post first.
#13
Member
iTrader: (2)
Joined: Mar 2009
Posts: 148
Likes: 0
From: Detroit, Michigan
Car: 1989 Camaro RS
Engine: 305 TBI
Transmission: 700R4
Re: Parting out 91RS - MINT Dash pad
two questions. What part of Ohio do u live? Im in the Cleveland area. and is the steering column a PASS-KEY security ignition or no? if not ill take it as long as its in good condition and under $100 also might be interested in a few other items as well. (Ground effectcs, nose w/ the reinforcement grid, driver fender, and driver door handle pieces) as long as the prices are good
I've got a column and wheel out of an 89 RS. The Tilt function is... not quite broken, but dying, maybe. I can take it out and see if it can't be fixed. It's pass key, ignition, and looks good. It's yours for 20 bucks if you want it (Detroit area - You'd have to pay shipping, but I could meet you close to the MI/OH border, if you'd rather). I also just saw one from a 92 on ebay for like 50 bucks.
#14
Junior Member
Joined: Mar 2009
Posts: 39
Likes: 0
From: North Carolina
Car: 88 Formula
Engine: E code, what else is there ??
Transmission: 700R4 stock
Axle/Gears: Stock w/ limited slip
Re: Parting out 91RS - MINT Dash pad
Woukd you possibly sell the Ac/heat blower motor and fan for $30 ?
*side note, you can remove the pass key cylinder from those columns and put a older one in from autozone for about 15 bucks.
*side note, you can remove the pass key cylinder from those columns and put a older one in from autozone for about 15 bucks.
#15
Re: Parting out 91RS - MINT Dash pad
I actually do need the steering column and wheel with the roller I'm buying.
I've got a column and wheel out of an 89 RS. The Tilt function is... not quite broken, but dying, maybe. I can take it out and see if it can't be fixed. It's pass key, ignition, and looks good. It's yours for 20 bucks if you want it (Detroit area - You'd have to pay shipping, but I could meet you close to the MI/OH border, if you'd rather). I also just saw one from a 92 on ebay for like 50 bucks.
I've got a column and wheel out of an 89 RS. The Tilt function is... not quite broken, but dying, maybe. I can take it out and see if it can't be fixed. It's pass key, ignition, and looks good. It's yours for 20 bucks if you want it (Detroit area - You'd have to pay shipping, but I could meet you close to the MI/OH border, if you'd rather). I also just saw one from a 92 on ebay for like 50 bucks.
#18
Junior Member
Joined: Mar 2009
Posts: 39
Likes: 0
From: North Carolina
Car: 88 Formula
Engine: E code, what else is there ??
Transmission: 700R4 stock
Axle/Gears: Stock w/ limited slip
Re: Parting out 91RS - MINT Dash pad
Im sorry if I caused you any trouble, I picked an new one from Auto Zone today for $20. Impulse buy but no heater blower this last winter ticked me off.
#19
Re: Parting out 91RS - MINT Dash pad
Any word on the body plastics (front bumper/clip, GFX) thats about all i need for mine along with the pass fender and carpet. I dont kno what the status is with this post and the 91 being parted so i figured i would just throw it out there and if its available then great but if not then there was no harm in asking
#21
Member
iTrader: (2)
Joined: Mar 2009
Posts: 148
Likes: 0
From: Detroit, Michigan
Car: 1989 Camaro RS
Engine: 305 TBI
Transmission: 700R4
Re: Parting out 91RS - MINT Dash pad
Any word on the body plastics (front bumper/clip, GFX) thats about all i need for mine along with the pass fender and carpet. I dont kno what the status is with this post and the 91 being parted so i figured i would just throw it out there and if its available then great but if not then there was no harm in asking
I have an extra set of doors off of my red 89 RS - Grey interior. The driver has a big dent in it, and the vinyl handle on the inside isnt in very good shape. The electric unlock on the passanger door doesnt work. They've both got glass, no rust, and are in good working condition (aside from problems described).
If 40 bucks a piece sounds good, send me a message. I'm in MI near Detroit. If you want me to ship them, I'm willing... but it'll probably cost an arm and a leg.
#22
Thread Starter
Member
Joined: Jul 2002
Posts: 144
Likes: 0
From: Ohio
Car: 1991 RS
Engine: 406 in progress
Transmission: th350
Re: Parting out 91RS - MINT Dash pad
I have the ground effect pieces and the grill. The front GFX piece is cracked, other than that they are good. I'll have to come up with a price - let me know if your interested and I'll figure it out.
#25
Thread Starter
Member
Joined: Jul 2002
Posts: 144
Likes: 0
From: Ohio
Car: 1991 RS
Engine: 406 in progress
Transmission: th350
Re: Parting out 91RS - MINT Dash pad
Dash pad is available again - deal fell through, yet again. As far as pictures go - see above. If you want more, let me know I suppose.
#27
Thread Starter
Member
Joined: Jul 2002
Posts: 144
Likes: 0
From: Ohio
Car: 1991 RS
Engine: 406 in progress
Transmission: th350
Re: Parting out 91RS - MINT Dash pad
I Just checked the lid and deemed it garbage. The underside plastic is cracking or cracked off over most of it, both the inside piece and the outer piece. The foam is out of shape around the edges, the only good part about it is the outer vinyl. It has a few light blemishes, but not tears, holes, or scuffs. If you just wanted it for the outter vinyl I can get pics of it, but in general I think I'm just going to throw it away.
#28
Junior Member
Joined: Oct 2008
Posts: 63
Likes: 0
From: Jamestown, NY
Car: 1992 Z28 Vert. 1 of 1254
Engine: 305 TPI
Transmission: 5-speed manual
Axle/Gears: 3.08 posi
Re: Parting out 91RS - MINT Dash pad
Hows the air bag? I'm looking for one that has no damage or shrinkage around the edges. Also need black trunk panel that hides the tailight nuts. Thanks!
#29
Thread Starter
Member
Joined: Jul 2002
Posts: 144
Likes: 0
From: Ohio
Car: 1991 RS
Engine: 406 in progress
Transmission: th350
Re: Parting out 91RS - MINT Dash pad
Airbag is gone with the car, but it wasnt in great shape anyway. as far as the trunk panel - are you talking about the very back interior plastic panel that spans close to the whole width of the back ? If so, I have it, but its grey not black - but can probably be dyed.
#30
Supreme Member
iTrader: (9)
Joined: Sep 2002
Posts: 1,086
Likes: 19
From: Melbourne Australia but from South Carolina
Car: 1991 Trans Am convertible
Engine: 305 TPI
Transmission: Auto
Re: Parting out 91RS - MINT Dash pad
Do you have the wiper squirters and the hoses for them? I broke the clip that holds mine to the wiper arm.
#31
Thread Starter
Member
Joined: Jul 2002
Posts: 144
Likes: 0
From: Ohio
Car: 1991 RS
Engine: 406 in progress
Transmission: th350
Re: Parting out 91RS - MINT Dash pad
I dont - I left those on the car - didnt even think about them. Check with 89Camaro89MI, he might be willing to sell it to you.
Thread
Thread Starter
Forum
Replies
Last Post
Vintageracer
Interior Parts for Sale
1
08-11-2015 08:13 PM