lots of interior plastics
#601
Junior Member
iTrader: (15)
Joined: Jun 2010
Posts: 44
Likes: 5
From: Shreveport, La
Car: 1987 Iroc Z
Engine: 355 TPI Fully Built
Transmission: Borg Warner WC 5-Speed
Axle/Gears: Stock Posi Rearend
Re: lots of interior plastics
I need a driver's side under dash hush panel for an 87 if you have one. Thanks!
#602
Junior Member
Joined: Oct 2009
Posts: 1
Likes: 0
From: DF-Dub
Car: 91 Z28 Camaro
Engine: TPI 305
Transmission: T56
Axle/Gears: 4.10s
Re: lots of interior plastics
Ted-
Looking for black interior pieces...
Black Headliner Roof trim w/ third brake light
Rear T-Top hatch motor cover
Left Door sill
T-top headliner (any color or condition. Im going to reupholster my self)
Looking for black interior pieces...
Black Headliner Roof trim w/ third brake light
Rear T-Top hatch motor cover
Left Door sill
T-top headliner (any color or condition. Im going to reupholster my self)
#603
#605
Thread Starter
Senior Member
iTrader: (28)
Joined: Jun 2002
Posts: 966
Likes: 0
From: New Jersey
Car: 89 formula convert looks like a 92
Engine: original 350 tpi engine
Transmission: auto
Axle/Gears: 373 10 bolt with LS1 brakes
Re: lots of interior plastics
just to let everyone know i f you have not read in other posting i was hit hard by sandy its taken 7 months just to get into the house liveable but still not finished, i ended up throwing out 50 % of the parts due to flood waters, there are parts that were not affected but need to re inventory everything so its going to be a slow process, sorry for the delay
gcj280, i will due my best to look for it i know there were plenty of them and most were up high
FrankdaTank, i have some of that stuff still but going to be a bit before i can locate what i have
pybmf pm sent
86iroc'er, i know i have those, whats your e-mail address for some pics
gcj280, i will due my best to look for it i know there were plenty of them and most were up high
FrankdaTank, i have some of that stuff still but going to be a bit before i can locate what i have
pybmf pm sent
86iroc'er, i know i have those, whats your e-mail address for some pics
#606
Junior Member
Joined: Oct 2011
Posts: 6
Likes: 0
From: West Palm Beach, Fl
Car: 1992 Heritage RS Convertible
Engine: 305 H.O.
Transmission: 5speed
Re: lots of interior plastics
Hello, looking for door sill plates and interior rear quarter trim (convertible) all in red. If you have, how much with shipping to 33414? Thanks in advance.
#607
Re: lots of interior plastics
Hey, I need tan front seatbelt recievers (part that bolts to floor on either side of console). Mine are all cracked up from the sun. Do you have a good set for an 89? Tim
#608
Thread Starter
Senior Member
iTrader: (28)
Joined: Jun 2002
Posts: 966
Likes: 0
From: New Jersey
Car: 89 formula convert looks like a 92
Engine: original 350 tpi engine
Transmission: auto
Axle/Gears: 373 10 bolt with LS1 brakes
Re: lots of interior plastics
sorry guys sandy destroyed 90% of the interior and electronic parts i had
#609
Want a title? Post!
Joined: Jun 2013
Posts: 0
Likes: 0
From: Tatum, Texas
Car: 87 IROZ-Z
Engine: 5.7L
Transmission: 700R4
Axle/Gears: 3.27
#611
Thread Starter
Senior Member
iTrader: (28)
Joined: Jun 2002
Posts: 966
Likes: 0
From: New Jersey
Car: 89 formula convert looks like a 92
Engine: original 350 tpi engine
Transmission: auto
Axle/Gears: 373 10 bolt with LS1 brakes
Re: lots of interior plastics
bralda57, i dont but there is a guy in north jersey thats parting theses out as well and has a pretty good size shop and inventory,
cam406406, sorry i cant help went underwater
cam406406, sorry i cant help went underwater
#612
Junior Member
Joined: Dec 2012
Posts: 7
Likes: 2
Car: 89 GTA
Engine: 6.2 ls3
Transmission: T56
Axle/Gears: 3:73
Re: lots of interior plastics
hey man, im looking for interior plactics in black for my firebird anything you have should work considering im swapping from tan to black
#613
Thread Starter
Senior Member
iTrader: (28)
Joined: Jun 2002
Posts: 966
Likes: 0
From: New Jersey
Car: 89 formula convert looks like a 92
Engine: original 350 tpi engine
Transmission: auto
Axle/Gears: 373 10 bolt with LS1 brakes
Re: lots of interior plastics
jess68starr, key question, what year and t-top or hard top car,
#615
Thread Starter
Senior Member
iTrader: (28)
Joined: Jun 2002
Posts: 966
Likes: 0
From: New Jersey
Car: 89 formula convert looks like a 92
Engine: original 350 tpi engine
Transmission: auto
Axle/Gears: 373 10 bolt with LS1 brakes
Re: lots of interior plastics
jess68starr, i have a good amount of the plastics,
#617
Supreme Member
iTrader: (1)
Joined: Jul 2007
Posts: 1,263
Likes: 3
From: Great Smoky Mountains, Bryson City North Carolina
Car: 86WS6 30K and 82WS7 24K
Engine: 86:305 TPI, 82: 305 LG4
Transmission: 86:700R4, 82: T200C
Axle/Gears: 86:3:27 9 bolt, 82: 3:23 10 bolt
Re: lots of interior plastics
Hi Ted,
I am looking for the trim panels that attach to the inside of the t tops. These need to be a very nice set that are suitable for a show car. Prefer the ones without the key locks, however since the non-lockable styles are difficult to find, I can use the ones with key holes and install black rubber or plastic plugs in the holes. Need the passenger side, but will buy a pair if available.
Thanks,
Charles
I am looking for the trim panels that attach to the inside of the t tops. These need to be a very nice set that are suitable for a show car. Prefer the ones without the key locks, however since the non-lockable styles are difficult to find, I can use the ones with key holes and install black rubber or plastic plugs in the holes. Need the passenger side, but will buy a pair if available.
Thanks,
Charles
#618
Junior Member
Joined: Oct 2011
Posts: 6
Likes: 0
From: West Palm Beach, Fl
Car: 1992 Heritage RS Convertible
Engine: 305 H.O.
Transmission: 5speed
Re: lots of interior plastics
#619
Thread Starter
Senior Member
iTrader: (28)
Joined: Jun 2002
Posts: 966
Likes: 0
From: New Jersey
Car: 89 formula convert looks like a 92
Engine: original 350 tpi engine
Transmission: auto
Axle/Gears: 373 10 bolt with LS1 brakes
Re: lots of interior plastics
jess68starr, can you pm me your e-mail address, would like to send you some pic's
86WS6, will need to check but i think i have 2 without the key holes, not sure of condition but i know i have one pair,
tcarlos13, sorry i dont but a buddy is in the process of cutting up a white 92 rs convert with a red interior not sure of condition but will ask.
86WS6, will need to check but i think i have 2 without the key holes, not sure of condition but i know i have one pair,
tcarlos13, sorry i dont but a buddy is in the process of cutting up a white 92 rs convert with a red interior not sure of condition but will ask.
#622
Junior Member
Joined: Jul 2005
Posts: 15
Likes: 0
From: Alberta, Canada
Car: '82 & '84 Trans-Am
Engine: LG4 305 & L69 305 H.O.
Transmission: TH200C & 700 R4
Axle/Gears: 3:23 & 3:73 10 bolt
Re: lots of interior plastics
By any chance would you have a tan shoulder buckle cover such as this? This is for an '82 Trans Am, camel tan interior.
#624
Member
iTrader: (1)
Joined: Jul 2008
Posts: 179
Likes: 0
From: Des Moines, Ia
Car: 91 Firechicken
Engine: 355ci SBC
Transmission: 97GM BW T-56
Axle/Gears: 9", Moser 31 Splines 3.73s Trac Loc
Re: lots of interior plastics
Need all the rear plastic and door sill plastic for a 91 TA in black shipped to 50316
#625
Re: lots of interior plastics
Do you have a rear uncarpeted trim panel in black for the cargo area on a 89 TA? The one that goes across the very back of the trunk? It needs to have the provision for the cargo cover. Also need the cargo cover itself.
Thanks
Thanks
#626
Junior Member
iTrader: (1)
Joined: Jan 2013
Posts: 64
Likes: 0
From: Hobart, Indiana
Car: 1991 Firebird
Engine: stock 305
Transmission: Stock auto
Axle/Gears: stock
Re: lots of interior plastics
blooking for black door sill piece drivers side.. and both black door panel cup holders with no cracks with hardware and bolt cover pieces
#628
Thread Starter
Senior Member
iTrader: (28)
Joined: Jun 2002
Posts: 966
Likes: 0
From: New Jersey
Car: 89 formula convert looks like a 92
Engine: original 350 tpi engine
Transmission: auto
Axle/Gears: 373 10 bolt with LS1 brakes
Re: lots of interior plastics
tcarlos13, the door sills are shot but he does remember taking out the j convert parts on the back side of the door jams, just not sure where he put them before all the snow came, and is still here, and more on the way
codyscamaroz28 needs some info, like what year car, to start with plastics are different in different years,
Kevin Knight, sorry no more early stuff,
I DIG IT, that i dont have, very common broken part
breynolds, pm sent
damiano1, yes i have the rear panel, can you pm me your address, also do you want a vinyl or cloth cargo cover
Nickmiceli7, need to check but i should have it all, not sure if i still have the screw covers on the cup holders, as far as the door sill goes need to check how many are left,
TRANSAM82-92, sorry i dont have
codyscamaroz28 needs some info, like what year car, to start with plastics are different in different years,
Kevin Knight, sorry no more early stuff,
I DIG IT, that i dont have, very common broken part
breynolds, pm sent
damiano1, yes i have the rear panel, can you pm me your address, also do you want a vinyl or cloth cargo cover
Nickmiceli7, need to check but i should have it all, not sure if i still have the screw covers on the cup holders, as far as the door sill goes need to check how many are left,
TRANSAM82-92, sorry i dont have
Last edited by ted gerlach; 02-12-2014 at 04:48 AM.
#631
Joined: Sep 2009
Posts: 3,774
Likes: 94
From: Spokane WA
Car: 92 Lingenfelter Z28 articwhite
Engine: Aluminum 615BBC
Transmission: Th400wbrake/curri entps9" locker
Axle/Gears: 4.11/4.30/4.56
Re: lots of interior plastics
sent ya a pm. about flame red parts.
if ya do have any of the wheel well side parts. after payn ya.. all i need is going to be the wheel well hump part of the plastic.
all the rest can be cut away.. for shipping. as im just using part to make a better fit around the roll bar...
ill send pics and info.
if ya do have any of the wheel well side parts. after payn ya.. all i need is going to be the wheel well hump part of the plastic.
all the rest can be cut away.. for shipping. as im just using part to make a better fit around the roll bar...
ill send pics and info.
#633
Supreme Member
iTrader: (3)
Joined: Jan 2013
Posts: 3,038
Likes: 49
From: Newtown, CT
Car: 1987 IROC Original Owner
Engine: LB9
Transmission: M39 MM5
Axle/Gears: G80 G92 J65
Re: lots of interior plastics
Looking for anything you have in the 87 gray that's in good to excellent for an 87 IROC with deluxe luggage compartment trim, & grey custom cloth seats. Need the seats too. I'm in CT & could come down to pick them up - no boxing or shipping needed.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM