Couple of parts I don't need. Seats, 2 cargo cover, ect
05-11-2006, 01:49 AM
#1
Couple of parts I don't need. Seats, 2 cargo cover, ect
I went to the junk yard today and there was a car that had the covers that go over the under dash interior lights (by your feet). Both in great condition.
I also got a mint vinyl cargo cover, so I have a canvas rear cargo cover thats faded but works great. Doesn't roll completely up when disconected from the hatch, but it stays tight when connected to the hatch when closed.
I also got a dome light with the maplights built in. I thought this was a direct swap but the headliner need to be cut. I just spent $150 on a new headliner so I will not be cutting it.
I also got 4th gen seats so if anybody needs any of the 3rd gen factory seats (no seat tracks on pass side, and i kept my original drivers side tracks, so the drivers side has the 4th gen tracks) grey in color(front and rear splitbacks). All the seats are in great condition except the drivers seat has the ussual wear (small rips/tears). I could include the "bar" that you need to install the splitback rears.
I also got a hard rear cargo cover that has blue carpet on it. This is the one that covers the well in the rear of the car. My car has a power hatch release and this was on a "standard" non power hatch release car. So it does not fit in my car.
If you want/need any of these let me know and I'll post/email pics.
I also got a mint vinyl cargo cover, so I have a canvas rear cargo cover thats faded but works great. Doesn't roll completely up when disconected from the hatch, but it stays tight when connected to the hatch when closed.
I also got a dome light with the maplights built in. I thought this was a direct swap but the headliner need to be cut. I just spent $150 on a new headliner so I will not be cutting it.
I also got 4th gen seats so if anybody needs any of the 3rd gen factory seats (no seat tracks on pass side, and i kept my original drivers side tracks, so the drivers side has the 4th gen tracks) grey in color(front and rear splitbacks). All the seats are in great condition except the drivers seat has the ussual wear (small rips/tears). I could include the "bar" that you need to install the splitback rears.
I also got a hard rear cargo cover that has blue carpet on it. This is the one that covers the well in the rear of the car. My car has a power hatch release and this was on a "standard" non power hatch release car. So it does not fit in my car.
If you want/need any of these let me know and I'll post/email pics.
05-12-2006, 12:39 PM
#2
Member
Join Date: Jan 2006
Location: Flint, MI
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Car: 05 C6, 91 z28 Vert, 66 Mustang vert
Engine: Ls2, TPI 350, 289 4bbl
Transmission: T-56, T-5, C4
Axle/Gears: 3.42,3.08,3.73
Originally Posted by krisb410
I went to the junk yard today and there was a car that had the covers that go over the under dash interior lights (by your feet). Both in great condition.
I also got a mint vinyl cargo cover, so I have a canvas rear cargo cover thats faded but works great. Doesn't roll completely up when disconected from the hatch, but it stays tight when connected to the hatch when closed.
I also got a dome light with the maplights built in. I thought this was a direct swap but the headliner need to be cut. I just spent $150 on a new headliner so I will not be cutting it.
I also got 4th gen seats so if anybody needs any of the 3rd gen factory seats (no seat tracks on pass side, and i kept my original drivers side tracks, so the drivers side has the 4th gen tracks) grey in color(front and rear splitbacks). All the seats are in great condition except the drivers seat has the ussual wear (small rips/tears). I could include the "bar" that you need to install the splitback rears.
I also got a hard rear cargo cover that has blue carpet on it. This is the one that covers the well in the rear of the car. My car has a power hatch release and this was on a "standard" non power hatch release car. So it does not fit in my car.
If you want/need any of these let me know and I'll post/email pics.
I also got a mint vinyl cargo cover, so I have a canvas rear cargo cover thats faded but works great. Doesn't roll completely up when disconected from the hatch, but it stays tight when connected to the hatch when closed.
I also got a dome light with the maplights built in. I thought this was a direct swap but the headliner need to be cut. I just spent $150 on a new headliner so I will not be cutting it.
I also got 4th gen seats so if anybody needs any of the 3rd gen factory seats (no seat tracks on pass side, and i kept my original drivers side tracks, so the drivers side has the 4th gen tracks) grey in color(front and rear splitbacks). All the seats are in great condition except the drivers seat has the ussual wear (small rips/tears). I could include the "bar" that you need to install the splitback rears.
I also got a hard rear cargo cover that has blue carpet on it. This is the one that covers the well in the rear of the car. My car has a power hatch release and this was on a "standard" non power hatch release car. So it does not fit in my car.
If you want/need any of these let me know and I'll post/email pics.
05-12-2006, 03:25 PM
#4
Originally Posted by C6matt
With the fourth gen tracks work in a 3rd gen? my car has the power seat and the foward-backward motor is shot...
Originally Posted by Steve 92 RS
How much for the the passanger side seats?
05-12-2006, 10:11 PM
#5
Supreme Member
iTrader: (45)
Join Date: Dec 2003
Location: Northern, VA
Posts: 3,970
Likes: 0
Received 0 Likes
on
0 Posts
Car: Pair of 92 Z28s
kris if you could get me a shot of the driver side seat, thanks.
Its gotta look better then my current one in my girls car. If its pretty decent let me know how much ur lookin for.
Its gotta look better then my current one in my girls car. If its pretty decent let me know how much ur lookin for.
05-12-2006, 10:51 PM
#6
Member
iTrader: (2)
Join Date: Dec 2004
Location: Kennett Square, PA
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 GTA
Engine: 383 Stroker L98 TPI
Transmission: 700 R4 w/ B&M Shift Kit
Axle/Gears: Stock BW LS 9 Bolt with 3.27 gears
What about the cargo covers
I'm looking for a black cargo cover for my 88 gta
How much with shipping to 19348?
How much with shipping to 19348?
05-12-2006, 11:36 PM
#7
Supreme Member
iTrader: (21)
Join Date: Dec 2005
Posts: 4,075
Likes: 0
Received 1 Like
on
1 Post
Car: 04 Silverado
Engine: 4.8
Transmission: auto
I have a piece of vinly that I removed from a broken roll up shade. I can replace the worn canvas to vinyl so I need a price just for the guts of your vinyl cargo shade?
Trending Topics
05-13-2006, 12:50 PM
#8
Originally Posted by M&M_GTA88
I'm looking for a black cargo cover for my 88 gta
How much with shipping to 19348?
How much with shipping to 19348?
Originally Posted by 82 Iron Duke
I have a piece of vinly that I removed from a broken roll up shade. I can replace the worn canvas to vinyl so I need a price just for the guts of your vinyl cargo shade?
12-28-2014, 04:24 PM
#10
Want a title? Post!
Join Date: Dec 2014
Location: Maryland
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 IROC-Z
Engine: 5.7L
Transmission: AUTO.
Re: Couple of parts I don't need. Seats, 2 cargo cover, ect
I went to the junk yard today and there was a car that had the covers that go over the under dash interior lights (by your feet). Both in great condition.
I also got a mint vinyl cargo cover, so I have a canvas rear cargo cover thats faded but works great. Doesn't roll completely up when disconected from the hatch, but it stays tight when connected to the hatch when closed.
I also got a dome light with the maplights built in. I thought this was a direct swap but the headliner need to be cut. I just spent $150 on a new headliner so I will not be cutting it.
I also got 4th gen seats so if anybody needs any of the 3rd gen factory seats (no seat tracks on pass side, and i kept my original drivers side tracks, so the drivers side has the 4th gen tracks) grey in color(front and rear splitbacks). All the seats are in great condition except the drivers seat has the ussual wear (small rips/tears). I could include the "bar" that you need to install the splitback rears.
I also got a hard rear cargo cover that has blue carpet on it. This is the one that covers the well in the rear of the car. My car has a power hatch release and this was on a "standard" non power hatch release car. So it does not fit in my car.
If you want/need any of these let me know and I'll post/email pics.
I also got a mint vinyl cargo cover, so I have a canvas rear cargo cover thats faded but works great. Doesn't roll completely up when disconected from the hatch, but it stays tight when connected to the hatch when closed.
I also got a dome light with the maplights built in. I thought this was a direct swap but the headliner need to be cut. I just spent $150 on a new headliner so I will not be cutting it.
I also got 4th gen seats so if anybody needs any of the 3rd gen factory seats (no seat tracks on pass side, and i kept my original drivers side tracks, so the drivers side has the 4th gen tracks) grey in color(front and rear splitbacks). All the seats are in great condition except the drivers seat has the ussual wear (small rips/tears). I could include the "bar" that you need to install the splitback rears.
I also got a hard rear cargo cover that has blue carpet on it. This is the one that covers the well in the rear of the car. My car has a power hatch release and this was on a "standard" non power hatch release car. So it does not fit in my car.
If you want/need any of these let me know and I'll post/email pics.
2402172613
12-31-2014, 05:07 PM
#11
Member
iTrader: (5)
Join Date: Nov 2004
Location: Galion, Ohio
Posts: 440
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 Firebird Fornula 350
Engine: 350 L98 / NOS
Transmission: 4sp Auto
Re: Couple of parts I don't need. Seats, 2 cargo cover, ect
How much for these and can you send pictures? jeff@rummell.net
I went to the junk yard today and there was a car that had the covers that go over the under dash interior lights (by your feet). Both in great condition.
I went to the junk yard today and there was a car that had the covers that go over the under dash interior lights (by your feet). Both in great condition.
12-31-2014, 07:17 PM
#12
12-31-2014, 10:14 PM
#13
Want a title? Post!
Join Date: Dec 2014
Location: Maryland
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 IROC-Z
Engine: 5.7L
Transmission: AUTO.
Re: Couple of parts I don't need. Seats, 2 cargo cover, ect
I went to the junk yard today and there was a car that had the covers that go over the under dash interior lights (by your feet). Both in great condition.
I also got a mint vinyl cargo cover, so I have a canvas rear cargo cover thats faded but works great. Doesn't roll completely up when disconected from the hatch, but it stays tight when connected to the hatch when closed.
I also got a dome light with the maplights built in. I thought this was a direct swap but the headliner need to be cut. I just spent $150 on a new headliner so I will not be cutting it.
I also got 4th gen seats so if anybody needs any of the 3rd gen factory seats (no seat tracks on pass side, and i kept my original drivers side tracks, so the drivers side has the 4th gen tracks) grey in color(front and rear splitbacks). All the seats are in great condition except the drivers seat has the ussual wear (small rips/tears). I could include the "bar" that you need to install the splitback rears.
I also got a hard rear cargo cover that has blue carpet on it. This is the one that covers the well in the rear of the car. My car has a power hatch release and this was on a "standard" non power hatch release car. So it does not fit in my car.
If you want/need any of these let me know and I'll post/email pics.
I also got a mint vinyl cargo cover, so I have a canvas rear cargo cover thats faded but works great. Doesn't roll completely up when disconected from the hatch, but it stays tight when connected to the hatch when closed.
I also got a dome light with the maplights built in. I thought this was a direct swap but the headliner need to be cut. I just spent $150 on a new headliner so I will not be cutting it.
I also got 4th gen seats so if anybody needs any of the 3rd gen factory seats (no seat tracks on pass side, and i kept my original drivers side tracks, so the drivers side has the 4th gen tracks) grey in color(front and rear splitbacks). All the seats are in great condition except the drivers seat has the ussual wear (small rips/tears). I could include the "bar" that you need to install the splitback rears.
I also got a hard rear cargo cover that has blue carpet on it. This is the one that covers the well in the rear of the car. My car has a power hatch release and this was on a "standard" non power hatch release car. So it does not fit in my car.
If you want/need any of these let me know and I'll post/email pics.
12-31-2014, 10:51 PM
#15
Member
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM