1988 1LE Camaro's
#151
Senior Member
Re: 1988 1LE Camaro's
My name is Scott Southers and we built all the factory race 1LE's F- bodys for GM. Rick A Shay and I are still friends today. I built most of the cars at TDM or W2W through the 80's and 90's. It was a great time and we were successful in the IMSA Firehawk series and SCCA series. We even had Tom Goad, Dougie's father driving for a while. This was all headed by Jeff Bietzel who has now passed away last fall a friend and great mentor to me and many others!! I still enjoy driving the 3rd gens. www.bsmtech.com
#152
Member
iTrader: (4)
Join Date: Apr 2008
Location: Tulsa Oklahoma
Posts: 482
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1990 IROC-Z 1LE
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: G92 3.23
Re: 1988 1LE Camaro's
This thread has been dead for over 5 years. You may want to start a new message and see if you can find your answers there
Best of luck
Krik
Best of luck
Krik
#153
Member
Re: 1988 1LE Camaro's
I just stumbled onto this thread.
I own two of the four 1988 IROC 1LE’s. Both are original and fully documented. Both are 350 CI Auto and have Fog Lights.
The Red one was originally owned by Delco and has 14K miles with Radio. The Black one has 2500 mi and is Radio Delete.
If I can figure out how, I will post Pics.
I also own a 1969 Dick Harrell COPO 427, a 1971 Baldwin Motion Phase III 454 and various other rare Camaro’s.
I own two of the four 1988 IROC 1LE’s. Both are original and fully documented. Both are 350 CI Auto and have Fog Lights.
The Red one was originally owned by Delco and has 14K miles with Radio. The Black one has 2500 mi and is Radio Delete.
If I can figure out how, I will post Pics.
I also own a 1969 Dick Harrell COPO 427, a 1971 Baldwin Motion Phase III 454 and various other rare Camaro’s.
#154
Senior Member
#155
Member
#156
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,898
Received 912 Likes
on
599 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: 1988 1LE Camaro's
IIRC, GM has a plastic part to fit in/over the antenna hole. Or maybe my memory is failing but I'm sure i've seen it in the parts book somewhere..
#157
Supreme Member
iTrader: (3)
Re: 1988 1LE Camaro's
My UL5 Radio Delete ordered 1987 IROC came with the antenna in the fender and the wiring harness for the speakers intact. It did not however have the holes cut in the side panels in the back that are covered by the fabric fill panels. Although my original dash mounted block off plate is long gone, I have another one that will be going in.
Thread
Thread Starter
Forum
Replies
Last Post