Jay

iTrader: (2)

I sent a down payment.

bmfIROC-Z

iTrader: (1)

finally some clear tails awesome!!

bmfIROC-Z

iTrader: (1)

was just wondering if somebody could pm me and tell me what exactly i gotta do to get a set of these tail light lenses , im a little confused

I H8 WWD

iTrader: (5)

Go to the sign up page located HERE, then send your interest at the bottom of the page, then send in your down payment with email address and/or name

Down payment is to ensure sale and to get the group buy made official.

Also we might be getting full housings which might bring the cost of these tails from $200 for lenses to $400 for full replacements. Price may be higher or lower, we wont know for sure until lenses are sent in for molds to be made. I heard our tails are easy to remove so i feel getting a housing might be probable.

Norwood

iTrader: (1)

I sent my down payment in for the replacement lenses, NOT for the full replacements. If I can't get just the lenses, then I'm back out and they can have my $20

krisb410

iTrader: (9)

I just want the lenses too. Unless you have a broken housing, which you get at a junk yard if needed. You really only need the lenses. Once you have them taken m you can clean up the housings pretty easily. Once we get the lenses in production, then we should be worried about the housing in a separate thread.

camarobeast84

iTrader: (1)

Screw that, I'm down for a full out set including lense housing and built in license plate lenses. For the love of god lets get this crackin'. I still haven't seen any pics of the different color choices or combos....

Norwood

iTrader: (1)

Since you have so much money to waste on things you don't need, can I have your old housings? Mine are a little dirty and I just don't want to clean them.

I H8 WWD

iTrader: (5)

Now guys, its not official yet and it is two separate molding processes. I am sure they can sell separate or might not do housings at all...the sooner the DP's are in the quciker we'll know.

Okally dokally im out.

krisb410

iTrader: (9)

Check the links already posted in this thread


Why spend @ $430 when you can accomplish the same for @ $200 for the lenses and @ $30 for the tag lights and a little elbow grease to clean up your current housings???????

camarobeast84

iTrader: (1)

Really that's none of anyone's concern. If I want it and can afford it that's my business, I don't mean to sound like a ****, but that's just the way it is...

Also, I saw a couple of photoshops in this thread, but it was only for the clear and the all red. I was under the impression that there would be more pictures posted, hence my post.

Thanks to all who are supporting this GP and this thread, and let's keep it constructive and in motion.

I H8 WWD

iTrader: (5)

Definitely like your attitude towards getting this done..haha, but there are more pictures on the site. www.klearz.com/camaro.html clear/light smoked, dark smoked, all red, smoked red. Shoot green if you wanted it to be..haha.

ewwewwnotme

What if they offered both options. Just the lens by itself and the lens and housing. When I took mine apart I cracked one of the clips on the lens and broke I think 2 of the black plastic rivets that are on top of the housing. I know everyone isnt willing to pay for both if you can just get the lens but with the option of both would make it better I think. Just my

I H8 WWD

iTrader: (5)

Well lets get the DP's in and then we'll ask for more options. Right now I am trying to get the GB's for the front&side markers and rear third brake light in order (in spoiler).

Norwood

iTrader: (1)

We need 5 more down payments to get this going, so just to keep this from dying and drum up interest I will send the following items free to one of the next 5 people who sends in their money.



Winner to be determined by I H8 WWD (to make this fair) from one of the next 5 people who make a down payment, if he so agrees, by lottery or however he decides.
Announce here after you have made payment to be entered.

I will include free shipping and items are unopenned. (Lokar 700r4 stainless dipstick and a Perma Cool radiator made cap made for aluminum radiators (will not fit Griffin radiators, damn it).

I H8 WWD

iTrader: (5)

This is also posted on http://www.camaros.net/forums/showthread.php?t=122299

Not many have responded on here.

I have been trying to get local guys in on this but most of the local guys are drag strip racers or just like to cruise...or just plain love the car stock.

I will keep trying to get more people in on this....as the sooner the better.

I dont want to go this far and not get anywhere ya know.

Norwood

iTrader: (1)

Then lets limit the entrants to those who respond here when we hit 15, whether its 1 or 5, that fair?

I H8 WWD

iTrader: (5)

Your giving the prizes so we'll keep it to the 5 entries here. Ill e-mail Tina after we get the next 5 DP's and ask for e-mails....pick 1 of 5 e-mails and see whos e-mail it is...then send them their prizes for getting this on the roll.

Hows that...

Norwood

iTrader: (1)

That's what we'll do. This is a good time for those who have shown interest to send in the deposit. A 1 in 5 chance of winning!

camarojustin

We definately can not let this die!
I just sent my down payment.

Is there any way we can post something about this GP in the appearance forum? I don't think that many people look way down here at the group purchases very often, or at all. I bet alot of people on here still don't know this is going on.

Plus.. now you can play the lottery for a sweet dipstick LOL

toxik IROC

iTrader: (12)

sent down payment
and im interested! just not sure what im interested yet i got a few ideas though

I H8 WWD

iTrader: (5)

I had this posted there first but they moved it to here because this is the actual Category for it.

Im going to post again but with this link as the referer. BRB

EDIT: Here it is https://www.thirdgen.org/forums/cama...ml#post3618188

The Entries:

1. camarojustin
2. toxik IROC
3.
4.
5.

12 DP's so far, 3 more

sadeks8

I just sent my DP so i guess im # 13

Jay

iTrader: (2)

I agree, I never scroll all the way down to the bottom for the group purchase thing. I only found this because of the post on the LED tail lights thread.

Norwood

iTrader: (1)

we need 2 more victims..I know we can do this, I've seen way too many sets of ugly tail lights out there

toxik IROC

iTrader: (12)

so one buy more for your other camaros.....commmon this has to get put into production common!tell your family tell your friends tell your dog ,but if your dog talks back to you....hmm

85_ZED28

Why doesn't this company actually MAKE a set first, then try to sell their product? I'm not trying to be a jerk or anything, I just really don't understand.

krisb410

iTrader: (9)

Because it cost a decent amount of money to make the molds. If they invest the money to make the molds and they don't sell enough lenses to recoup their initial investment, then they lost money. This way they are guaranteed to at least recoup their initial investment. They are in business to make a profit.

I H8 WWD

iTrader: (5)

Also from what I've heard they used to be a couple of guys in a garage trying to make aftermarket lenses for their community and friends. Now that they are known they are getting into the more difficult products and more expensive equipment to ensure quality....look at www.clearcorners.com this is a 'bigger' company, and all their lenses are cheap and usually use YOUR housings...and are MUCH MUCH more than KLEARZ. So when it comes down to it, this is the best out there...to me at least.

85_ZED28

I know what you're saying, but risk is what business is all about. Making the customer put down deposits to provide funding for the R & D of a new product just seems weird to me. Although, I'm no business man. I'm sure they can afford to at least make one prototype.

Anyways, I'm really interested in seeing the final product. Anyone making anything new for third gens is a good thing.

sadeks8

the 3rd brake light section is up on the page...check it out

chevboy28

to the top i wanna see what the actual products will look like so come on people

Stevo

iTrader: (45)

Down payment sent.

Lets get this rollin!

I H8 WWD

iTrader: (5)

1 more needed, thanks guys.

1. camarojustin
2. toxik IROC
3. sadeks8
4. Stevo
5.

tonys91rs

iTrader: (17)

i have just completed my down payment. i think all clear lenses will look good.

Norwood

iTrader: (1)

That makes 15, and our last contestant. JW ? Tell us who is our winner!

Spike-Z

iTrader: (4)

WOooo let the creation begins!

I H8 WWD

iTrader: (5)

Norwood

iTrader: (1)

Alright toxic iroc, send me some shipping info and I'll put this in the mail
for you. PM me or my email is roblewis(at)bigriver.net

p.s. I'll send when we get confirmation of 15 down payments, right now they
are showing 14

I H8 WWD

iTrader: (5)

Has anyone been reading this thread on LED tails.

GUESS WHAT, LED tails for the grid style tails are going to be made for us.

Spaghetti Eng. is making these....check em http://www.spaghettiengineering.com/...store/home.asp

these are said to fit inside the housing (obviously) but will need the lenses removed...so I think this is my next mod...LED tails.

Here is the thread on the write up and PAGE 5 is where the idea to reproduce started. So you can start reading from there on.

Page 1
https://www.thirdgen.org/forums/body...nversions.html

toxik IROC

iTrader: (12)

norwood i sent you a pm

I H8 WWD-Is the Spaghetti Eng. CO makingit just a plug and play? How much should this be?

I H8 WWD

iTrader: (5)

That company is making us the KIT. EVERYTHING NEEDED FOR FULL REPLACEMENT OF STOCK BULBS.

Price for that to come soon...might even need a group buy but it doesnt seem like they are doing that as they are dedicated to the GM cars/trucks.

CONGRATULATIONS ON THE WIN....because as I was pulling your name from the hat (yeah I did pull from a hat), your name was the last paper left in the hat, all others stuck together so thats how you won...by sticky paper..HAHA.

THANKS AGAIN GUYS. As Norwood said we are waiting for confirmation that all 15 DP's are there...once verified, Norwood will send out the prize.

toxik IROC

iTrader: (12)

I H8 WWD - Im in for the LED lights too.... So if I want two color lenses it will be an extra $20

I H8 WWD

iTrader: (5)

CORRECT

As for the LED's, I am unsure what color lenses I want now. Reason is, if the LED kits are white reverse, amber turn, and red brakes with NO TRIGNALE LIGHTS, I will need to get either clear or dark smoked or stock look or that amber will look weird through the red lens. BUT if the kits have red turn, red brakes and red triangle I AM getting DARK SMOKED..maybe even a custom BLACK...as dark as they can before total black...

So until I find out whether these LED kits are going to be stock colors and variation or custom setups per request, I cant get my lenses...or I might have to skip getting the LEDS and settle for regular replacement LEDS.

Norwood

iTrader: (1)

My luck, already got the sequential lights but not LEDs. I would still be interested only if I could get the LEDs all in red to match the new lenses.
I got toxic iroc's info and notified him I would send out tomorrow (As long as we have the 15 down payments)

I H8 WWD

iTrader: (5)

UPDATE 2-5-08: "Will start producing the lenses once we receive the oem set."

Norwood, that means 15 buddy. Send out the mans prize, thanks to you for urging this along and sacrificing parts.

I'd say another couple weeks and we'll see our first glimpse.

krisb410

iTrader: (9)

Tail lights are on the way to Klearz

Imthebriman

iTrader: (1)

I cant wait!!!!! I wanna see a set of these..... once they are finished...

Norwood

iTrader: (1)

toxic iroc has his package on the way. can't wait to see the 1st set of tail lights when they become available...

I H8 WWD

iTrader: (5)

I JUST WANTED TO REMIND EVERYONE, WHEN YOU MAKE YOUR ORDER THEY CAN DO ANY BASIC COLOR AT ANY DARKNESS OR LIGHTNESS...JUST SPECIFY.

I am getting my tails to match 5% TINT....real dark smoked. I figure if I get the LED kit from Spaghetti Engineering, I dont want the boards to show through, so I need them dark but still cleared....

I was even thinking on getting the top and lower grid sections painted solid and have just the center row shining through, but then I figured the LED kit wouldnt be worth it...to have all that extra light without it emitting through...

IDK, hopefully we see some custom setups...maybe red with black and green? HAHA