UMI Sub Frame Connectors--GP--Post for the committed
#1
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
UMI Sub Frame Connectors--GP--Post for the committed
CLOSING DATE FOR GP ORDER 31st JAN 06..Time has run out. This GP has come to a close. You missed out if you didnt order before the 31 of Jan.
NUMBER OF COMMITTED:28, PEOPLE WITH ORDERS IN:33
Once 20 people have ordered price per set will be: 159.99 per set (american)+shipping and UPS Brokrage.
(20 orders have now been placed giving those that order their sets for 159.99 (american) plus shipping and UPS brokrage)
EASIEST PAYMENT OPTION:
"Shopping Cart- For orders placed online we have created a Coupon code that reduces the price of the item to $159.99. During check out at our web site at www.umiperformance.com please enter coupon code 814502 and the price will be reduced to $159.99. If you were quoted a shipping price please enter the quoted amount in the in the comments section. I will personally e-mail each buyer with the correct amounts if a shipping price was quoted by me, if you were not quoated shipping the shopping cart will also figure shipping for you. If 20 buyers are not received the buyer will have the option to pay an additional $10.00 for the 10 person price if we have 10 buyers. If not we destroy your credit card information and discard the order. No credit cards will be charged until we have reached the correct amount of buyers. We can accept Visa, MasterCard, American Express and Paypal."--Quoted from Ryan at UMI--
______________________________________________
Hey guys new thread just for us that are committed. Do not reply here if not committed we have 3 of 10 so far.
For those saying huh wad through this thread on TGO....
https://www.thirdgen.org/techbb2/sho...hreadid=335711
if your committed post on that site and then on this one.....but dont post on this if you are not committed or interested in this GP
IROCSTANG IS IN-----1 out of 10
NUMBER OF COMMITTED:28, PEOPLE WITH ORDERS IN:33
Once 20 people have ordered price per set will be: 159.99 per set (american)+shipping and UPS Brokrage.
(20 orders have now been placed giving those that order their sets for 159.99 (american) plus shipping and UPS brokrage)
EASIEST PAYMENT OPTION:
"Shopping Cart- For orders placed online we have created a Coupon code that reduces the price of the item to $159.99. During check out at our web site at www.umiperformance.com please enter coupon code 814502 and the price will be reduced to $159.99. If you were quoted a shipping price please enter the quoted amount in the in the comments section. I will personally e-mail each buyer with the correct amounts if a shipping price was quoted by me, if you were not quoated shipping the shopping cart will also figure shipping for you. If 20 buyers are not received the buyer will have the option to pay an additional $10.00 for the 10 person price if we have 10 buyers. If not we destroy your credit card information and discard the order. No credit cards will be charged until we have reached the correct amount of buyers. We can accept Visa, MasterCard, American Express and Paypal."--Quoted from Ryan at UMI--
______________________________________________
Hey guys new thread just for us that are committed. Do not reply here if not committed we have 3 of 10 so far.
For those saying huh wad through this thread on TGO....
https://www.thirdgen.org/techbb2/sho...hreadid=335711
if your committed post on that site and then on this one.....but dont post on this if you are not committed or interested in this GP
IROCSTANG IS IN-----1 out of 10
Last edited by irocstang; 02-01-2006 at 09:29 AM.
#3
Supreme Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (30)
Join Date: Sep 2005
Location: O'Fallon, MO
Posts: 6,258
Likes: 0
Received 4 Likes
on
4 Posts
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
when is the planned date on the purchase? if you guys do this in spring/summer then i'll be 3 of 10. i'll have the money around the beginning of summer...just asking to see when you guys are planning on it?
#4
Supreme Member
Join Date: Jul 2005
Location: Miramichi, NB
Posts: 1,423
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Monte Carlo
Engine: Blown 489
Transmission: TH400
Axle/Gears: 9" 370s
im guessing we do the transaction soon as we get 10 people?
i wonder if you get 15-20 if they will lower the price even more.
i wonder if you get 15-20 if they will lower the price even more.
#5
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
price....
the more we get the less it will probably cost us.......that would be sweet if we could get 40 people together on it and get them for more than 1/2 off. Ryan at UMI is away today so ill email him tommorrow about it. Please post this type of quetion on the other thread.
yes we worry about the transaction once weve rounded up enough people.
Thanks
IRoc
yes we worry about the transaction once weve rounded up enough people.
Thanks
IRoc
#6
Supreme Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (3)
Join Date: May 2005
Location: Southern IL
Posts: 1,942
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 GTA "Cocaine"
Engine: 350 tpi
Transmission: 700r4
Axle/Gears: 3.27
I am definatly in. these look strong and I love to wip it around the corner and I have t-tops.
I have two questions
1- do we have to cut the exsisting rear control arm mounts.
2- I have edelbrok tes headers what will I have to do to make it work. I want to have as much info for the guy who is going to do the welding
I have two questions
1- do we have to cut the exsisting rear control arm mounts.
2- I have edelbrok tes headers what will I have to do to make it work. I want to have as much info for the guy who is going to do the welding
#7
Supreme Member
Join Date: Jul 2005
Location: Miramichi, NB
Posts: 1,423
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Monte Carlo
Engine: Blown 489
Transmission: TH400
Axle/Gears: 9" 370s
i have hooker shorty headers, 2 1/2" y-pipe, i guess the little piece is to go from your subframe to the subframe connectors so that the exhaust is nice and snug
im also wondering what we do about the rear control arms
im also wondering what we do about the rear control arms
Trending Topics
#8
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
ansewers
no they do not replace the contol arm mounts they go over top of them then you weld them...Ryan says you must take the bolt out of the control arm bracket weld them over top and the holes in the sfcs should match the holes on the brackets....just reinstall the bolt..make sure to have bolt through both stock bracket and sfc bracket before welding (Theres holes in the sfc brackets for the control arm bolts)
get control arm bolt out put subframe bracket over stock bracket put in bolt....make sure rest of rail meets the subframe where it should. (ryan says it will be obvious once you have the bolt through the brackets) and weld the SFCs onto the subframes including welding the SFC brackets to the stock control arm brackets
yes you will use the extra piece and yes it will fit...once the two rails are welded in slide the extra piece under the y pipe to a place that meets the subframe rail and the subframe, place it so exhaust does not have a chance of hiting it, and weld..
no mounting instructions online...is real friken easy though.
hope this helps
get control arm bolt out put subframe bracket over stock bracket put in bolt....make sure rest of rail meets the subframe where it should. (ryan says it will be obvious once you have the bolt through the brackets) and weld the SFCs onto the subframes including welding the SFC brackets to the stock control arm brackets
yes you will use the extra piece and yes it will fit...once the two rails are welded in slide the extra piece under the y pipe to a place that meets the subframe rail and the subframe, place it so exhaust does not have a chance of hiting it, and weld..
no mounting instructions online...is real friken easy though.
hope this helps
Last edited by irocstang; 12-13-2005 at 06:21 PM.
#9
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
planned date for purchase
the planned date for purchase will be the last day of january 2006. I have set this date a bit later than id like it to be so that we can hopefully get 10 people.
we have 3 of 10 people so far.
we have 3 of 10 people so far.
#11
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
great 5 of 10.
Right on the more we get the less it costs us.
ALL IN ARE:
Irocstang
Jamon8
Roughskinz
Bluezee
Bigdavesiroc
Questionable is: Flamingford......is very interested though.
Thanks and any questions or comments appretiated on the other post.
ALL IN ARE:
Irocstang
Jamon8
Roughskinz
Bluezee
Bigdavesiroc
Questionable is: Flamingford......is very interested though.
Thanks and any questions or comments appretiated on the other post.
#13
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
great 6 out of 10
Right on the more we get the less it costs us.
ALL IN ARE:
Irocstang
Jamon8
Roughskinz
Bluezee
Bigdavesiroc
Camaroracerlt1
Questionable is: Flamingford......is very interested though.
Thanks and any questions or comments appretiated on the other post.
ps If we have the full 10 before the end of January we will go for more people untill the last day of Jan 2006.
Thanks. My research is paying off. Who want to pay full price when they can pay less.
ALL IN ARE:
Irocstang
Jamon8
Roughskinz
Bluezee
Bigdavesiroc
Camaroracerlt1
Questionable is: Flamingford......is very interested though.
Thanks and any questions or comments appretiated on the other post.
ps If we have the full 10 before the end of January we will go for more people untill the last day of Jan 2006.
Thanks. My research is paying off. Who want to pay full price when they can pay less.
#14
Member
Join Date: Mar 2002
Location: Bradley,IL
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
Car: 83 T-top T/A, 92 RS
Engine: 1970 LT1,305 TBI
Transmission: Th-400, 700r4
Axle/Gears: 3.42,2.73
Count me In
Just get me info on Who, How much, Where to send $, and When. I am all in.
![thumbs up](https://www.thirdgen.org/forums/images/smilies/thumbsup.gif)
#15
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
4MULA88
Great. awsome. you are #7 of 10. The prices are on the other post near the beggining. The S+H plus delivery method is also there. Any questions about your order 4MULA88 PM me. Will supply each of the committed with invoices with the totals nearer to the end of Jan. For now read the other post carefully.
7 out of 10
ALL IN ARE:
Irocstang
Jamon8
Roughskinz
Bluezee
Bigdavesiroc
Camaroracerlt1
4MULA88
Questionable is: Flamingford......is very interested though.
Thanks and any questions or comments appretiated on the other post
Thanks.
keep the committed coming guys.
7 out of 10
ALL IN ARE:
Irocstang
Jamon8
Roughskinz
Bluezee
Bigdavesiroc
Camaroracerlt1
4MULA88
Questionable is: Flamingford......is very interested though.
Thanks and any questions or comments appretiated on the other post
Thanks.
keep the committed coming guys.
#16
Member
Join Date: Mar 2003
Location: Illinois
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro Sport Coupe LT
Engine: 357
Transmission: turbo 350
Axle/Gears: 10 bolt posi, 3.73 gears
did you find out if it would be even less if there are more than 10 people?
#17
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
not yet
will base order on 10. If we get more ill inquire. May have to get 20 to get even more off...i dunno. Are you in or what?
8 out of 10
ALL IN ARE:
Irocstang
Jamon8
Roughskinz
Bluezee
Bigdavesiroc
Camaroracerlt1
4MULA88
Wiseman9986 (posted he was in on other thread..sent message to him to post here....hopefully he does soon)
Questionable is: Flamingford......is very interested though.
8 out of 10
ALL IN ARE:
Irocstang
Jamon8
Roughskinz
Bluezee
Bigdavesiroc
Camaroracerlt1
4MULA88
Wiseman9986 (posted he was in on other thread..sent message to him to post here....hopefully he does soon)
Questionable is: Flamingford......is very interested though.
#19
Supreme Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (4)
Join Date: Mar 2005
Location: Home of most 3rd gens Van Nuys, CA
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC
Engine: Turbo 293ci 4.8l
Transmission: T56
two questions
1. do they get shipped to one location or to our house?
2. will they fit my irocs exhaust?
if theyll fit then count me in
1. do they get shipped to one location or to our house?
2. will they fit my irocs exhaust?
if theyll fit then count me in
#20
Supreme Member
Join Date: Jul 2005
Location: Miramichi, NB
Posts: 1,423
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Monte Carlo
Engine: Blown 489
Transmission: TH400
Axle/Gears: 9" 370s
im guessing we all send payment to them directly, they ship them to our house, and what exhaust do you have
#21
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
eternaldarkness
they are shipped to our houses via ups (they are insured)
read the other post very carefully all info is in there.
have an 86 Iroc myself 2 inch exhaust straight pipe from the headers to the flowmaster. Theyll fit mine. is your exhaust stock?
are you in?
read the other post very carefully all info is in there.
have an 86 Iroc myself 2 inch exhaust straight pipe from the headers to the flowmaster. Theyll fit mine. is your exhaust stock?
are you in?
Last edited by irocstang; 12-17-2005 at 09:37 PM.
#22
Supreme Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (4)
Join Date: Mar 2005
Location: Home of most 3rd gens Van Nuys, CA
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC
Engine: Turbo 293ci 4.8l
Transmission: T56
well i have SLP headers and y pipes that connect like right b4 the cat. if you look in my passenger side wheel well you can see the 2 pipes running right there.
just to be safe let me look 2morrow underneath there and then ill let you guys know.but judging from the other pics with the stock exhaust it looks like there might be room. let me check first.
if it looks like itll clear then yeah im in
just to be safe let me look 2morrow underneath there and then ill let you guys know.but judging from the other pics with the stock exhaust it looks like there might be room. let me check first.
if it looks like itll clear then yeah im in
#23
Supreme Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (3)
Join Date: May 2005
Location: Southern IL
Posts: 1,942
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 GTA "Cocaine"
Engine: 350 tpi
Transmission: 700r4
Axle/Gears: 3.27
that is so sweet. what do we have 9 or so. I have the edelbrock tes system same deal except the slp headers do not have the turn out at the end of the y-pipe. I want to hear that for sure this will work
#24
Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (1)
Join Date: May 2004
Location: New Port Richey, Fl
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Trans Am
Engine: 6.6 at least
Transmission: T-56 (waiting)
Axle/Gears: 9" w/4.56 & spool (4 now)
If my long tube headers and duel pipes will clear, with little or no modification then you can count me in.
![thumbs up](https://www.thirdgen.org/forums/images/smilies/thumbsup.gif)
#25
Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
Join Date: Aug 2005
Location: PA
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 25th Anniversary White W/ Red
Engine: Procharged 383CI/ Soon LS2 Turbo
Transmission: Manual 700R4
Axle/Gears: 4:11/Auburn Posi/Moser Axle
depending how cheap its gonna be count me in?
#27
Supreme Member
Join Date: Jul 2005
Location: Miramichi, NB
Posts: 1,423
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Monte Carlo
Engine: Blown 489
Transmission: TH400
Axle/Gears: 9" 370s
yeah he has to email the guy, we already hit 10, and are only half way through december, even 169.99 is a good price, but even lower is better
![thumbs up](https://www.thirdgen.org/forums/images/smilies/thumbsup.gif)
#28
Junior Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
Join Date: Jul 2003
Location: Canada, B.C.
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 IROC t-tops
Engine: 5.7 (350 tpi)
Transmission: Auto (700R4)
Axle/Gears: 9 bolt disc with 3.73's
Just wondering is the GP availiable to Canadian's?
I have a small mig welder (OLD MILLER Cricket welder) with .35 flux core wire, would that be enough to weld these in (I am not that great of a welder)
I think the welder is rated at 20% duty cycle and 70 amps?
I have only considered Spohn but I know that I would have trouble welding to the thin floor/body under the carpet and I could probably get hotchkis but I am not sure of the quality.
I am very interested in the UMI due to the easier install?? I currently have the stock exhaust but I want to run the hooker 2055's with the hooker "Y" pipe and an aftermarket cat or the SLP's (which one I don't know (carsound? Hedman? I need to do some research)
Here is another dumb question (I hope not though) shouldn't the cars be checked for straightness before installing the connectors?? My IROC looks like it has been put on a frame straighting rack (yes I know it's unibody)
It's a t-top car and I replaced the gearing from 2.77 to 3.73 and I think the car is flexing quite a bit more.
The car also seems to have small creeces at the top of the quarter panel at the top of the hatch at the back of the t-top
(CLEAR AS MUD???)
I have a small mig welder (OLD MILLER Cricket welder) with .35 flux core wire, would that be enough to weld these in (I am not that great of a welder)
![Frown](https://www.thirdgen.org/forums/images/smilies/frown.gif)
I have only considered Spohn but I know that I would have trouble welding to the thin floor/body under the carpet and I could probably get hotchkis but I am not sure of the quality.
I am very interested in the UMI due to the easier install?? I currently have the stock exhaust but I want to run the hooker 2055's with the hooker "Y" pipe and an aftermarket cat or the SLP's (which one I don't know (carsound? Hedman? I need to do some research)
Here is another dumb question (I hope not though) shouldn't the cars be checked for straightness before installing the connectors?? My IROC looks like it has been put on a frame straighting rack (yes I know it's unibody)
It's a t-top car and I replaced the gearing from 2.77 to 3.73 and I think the car is flexing quite a bit more.
The car also seems to have small creeces at the top of the quarter panel at the top of the hatch at the back of the t-top
(CLEAR AS MUD???)
#29
Supreme Member
Join Date: Jul 2005
Location: Miramichi, NB
Posts: 1,423
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Monte Carlo
Engine: Blown 489
Transmission: TH400
Axle/Gears: 9" 370s
grizlee i live in canada. yes we can get it, also the person who started this irocstang i believe is from canada.
these will keep your car straight, and beef up the frame some, my motor has about 375HP and i dont have subframe connectors yet
these will keep your car straight, and beef up the frame some, my motor has about 375HP and i dont have subframe connectors yet
#30
Junior Member
Join Date: Feb 2005
Location: London,Ohio
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 firebird formula
Engine: 350 sbc
Count me in! Ive been researching SFC's for about a month now, and i just happen to stumble along this thread, and im def goin with these SFC's, count me in for a set! Now where and when do i send my money. Thanx
#31
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
exhaust questions ansewered
received this email from umi about your exhausts
"I suggest they use our installation pictures from the site to determine clearance issues with certain exhaust set-ups. I am assuming with there longtube headers and true duals they are running straight down the center of the vehicle in the tunnel. If this is the case, there will no clearance issues and the SFC's will fit excellent. "
Hope that helps!
Ryan"
post that you are in on this thread UMI GP---for the committed.
irocstang
"I suggest they use our installation pictures from the site to determine clearance issues with certain exhaust set-ups. I am assuming with there longtube headers and true duals they are running straight down the center of the vehicle in the tunnel. If this is the case, there will no clearance issues and the SFC's will fit excellent. "
Hope that helps!
Ryan"
post that you are in on this thread UMI GP---for the committed.
irocstang
Last edited by irocstang; 12-19-2005 at 11:41 AM.
#32
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
10 out of 10....lets try to get 20
Waiting on a reply from an email i sent umi about cost if we get 20 in. will post reply when i get it.
10 of 10 are in ....
ALL IN ARE: (10 of 20) end date Jan 31/06
Irocstang
Jamon8
Roughskinz
Bluezee
Bigdavesiroc
Camaroracerlt1
4MULA88
Wiseman9986
Formula350sd
87 350
Questionable are:
Flamingford
Brdofpry85ta
Eternaldarkness
Grizzlee
will post ansewers to questions tommorrow. Read both posts before asking questions. If there is no ansewer within ask away. Seems like im ansewering the same question over and over again....
This is great
10 of 10 are in ....
ALL IN ARE: (10 of 20) end date Jan 31/06
Irocstang
Jamon8
Roughskinz
Bluezee
Bigdavesiroc
Camaroracerlt1
4MULA88
Wiseman9986
Formula350sd
87 350
Questionable are:
Flamingford
Brdofpry85ta
Eternaldarkness
Grizzlee
will post ansewers to questions tommorrow. Read both posts before asking questions. If there is no ansewer within ask away. Seems like im ansewering the same question over and over again....
This is great
#34
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
11 are now in
Right on 11 are now in
ALL IN ARE: (11 of 20) end date Jan 31/06
Irocstang
Jamon8
Roughskinz
Bluezee
Bigdavesiroc
Camaroracerlt1
4MULA88
Wiseman9986
Formula350sd
87 350
Eternaldarkness
Questionable are:
Flamingford
Brdofpry85ta
Grizzlee
92krvZ28
will have email back today about cost if we get 20 people in....will post when i recieve it...if we got 11 already and have a month to go im sure we can get 20.
To: 92krvZ28-----depending on price your in? Price is already way less than if not doing a GP. If it is less for 20 right on even more savings...bonus. Are you in or what?
To: Grizlee: Should unibody be checked for straightness.....probably not...mines got Ts too...u preload the suspension (see install instructions on other post) and weld them in....even an ametuer can weld them in ive been told as its vertually impossible to screw up. (undue control arm bolt in bracket , mount control arm bracket on sfc over stock control arm bracket then reinsert bolt, then weld at all welding points...also on other post...read carefully)
all weld points will meet up with the subframe at exactly the right location after you have the sfc bracket secured over the stock control arm bracket.
These are available to us canadians. There is a few on these posts already. I am one of them. I live on Vancouver Island in British Columbia, Canada.
ALL IN ARE: (11 of 20) end date Jan 31/06
Irocstang
Jamon8
Roughskinz
Bluezee
Bigdavesiroc
Camaroracerlt1
4MULA88
Wiseman9986
Formula350sd
87 350
Eternaldarkness
Questionable are:
Flamingford
Brdofpry85ta
Grizzlee
92krvZ28
will have email back today about cost if we get 20 people in....will post when i recieve it...if we got 11 already and have a month to go im sure we can get 20.
To: 92krvZ28-----depending on price your in? Price is already way less than if not doing a GP. If it is less for 20 right on even more savings...bonus. Are you in or what?
To: Grizlee: Should unibody be checked for straightness.....probably not...mines got Ts too...u preload the suspension (see install instructions on other post) and weld them in....even an ametuer can weld them in ive been told as its vertually impossible to screw up. (undue control arm bolt in bracket , mount control arm bracket on sfc over stock control arm bracket then reinsert bolt, then weld at all welding points...also on other post...read carefully)
all weld points will meet up with the subframe at exactly the right location after you have the sfc bracket secured over the stock control arm bracket.
These are available to us canadians. There is a few on these posts already. I am one of them. I live on Vancouver Island in British Columbia, Canada.
#35
Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
Join Date: Aug 2005
Location: PA
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 25th Anniversary White W/ Red
Engine: Procharged 383CI/ Soon LS2 Turbo
Transmission: Manual 700R4
Axle/Gears: 4:11/Auburn Posi/Moser Axle
ill most likely be in but can id like to wait and see what deal ryan gives you. hes a good guy i talked to him this past summer out at carlisle
#37
Supreme Member
Join Date: Jul 2005
Location: Miramichi, NB
Posts: 1,423
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Monte Carlo
Engine: Blown 489
Transmission: TH400
Axle/Gears: 9" 370s
yes are getting a great deal, nicest subframe connectors i have seen and are at only 169.99$ so i jumped at the chance, my T/A has t-tops also and i need to beef up the frame due to the new motor. if we get 15-20+ people and he drops it even more, that would be awesome.
#38
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
Me Too
I also jumped at the chance. The nicest, beefest, cheapest with this GP ones and also the easiest to not scew up when installing; almost fool proof.
Whos gonna be #12?
Whos gonna be #12?
#39
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
Price if we get 20 people in on this GP
Wrote this email to Ryan at UMI:
"Ryan,
I already have 11 people so far in on the GP. I have posted the closing date for this GP as Jan 31/06. Is that ok with you?
In regards to this statement from you
"Here are the prices, we can do either 5 people or 10 people.
5-9 People- $184.99 a set
10+ People- $169.99 a set"
If we get 20 people or more by the end of January is there any chance that we would receive further discount? If there is i am sure I can manage to round up even more people. If there is a chance of further discount at 20+
people what would the price be?
Thanks for the speedy reply"
This is the reply to ryans email I received today:
"The best price and the lowest I can go on these for 20 people would be $159.99 a set, I know 20 people is quite a bit but I just can't go any less. I hope you understand.
If you can get 20 people that is great. One thing to note and I mean this in no harsh way and I am just giving you advise. I have ran a lot of GP's in the past and one thing I have learned is approx. only half the people who sign up actually go through with it. Like I said I don't mean that harsh, just learned that from my past experience and I could be wrong. But you better to have a few extras just in case.
January 31st is fine. Once the number of people is meet each one would have to contact me either phone, e-mail or using our shopping cart with payment. What we would do is get each member to pay for their own set plus their shipping and we ship it to them. What I do on a GP is gather every persons info as they order and hold it, we will not charge anyones card until I have received 10 or 20 orders which ever you choose it to be. We will also not ship until all payments are received, this way we assure it goes through.
If you have anymore questions please ask. Thanks again!
Ryan"
Does this sound good?
We got 11 whos gonna be 12? We have just over a month untill the order.
Please comment.
epsecially:
Hotrod87camaro
92KrvZ28
Grizzlee
Brdofpry85ta
"Ryan,
I already have 11 people so far in on the GP. I have posted the closing date for this GP as Jan 31/06. Is that ok with you?
In regards to this statement from you
"Here are the prices, we can do either 5 people or 10 people.
5-9 People- $184.99 a set
10+ People- $169.99 a set"
If we get 20 people or more by the end of January is there any chance that we would receive further discount? If there is i am sure I can manage to round up even more people. If there is a chance of further discount at 20+
people what would the price be?
Thanks for the speedy reply"
This is the reply to ryans email I received today:
"The best price and the lowest I can go on these for 20 people would be $159.99 a set, I know 20 people is quite a bit but I just can't go any less. I hope you understand.
If you can get 20 people that is great. One thing to note and I mean this in no harsh way and I am just giving you advise. I have ran a lot of GP's in the past and one thing I have learned is approx. only half the people who sign up actually go through with it. Like I said I don't mean that harsh, just learned that from my past experience and I could be wrong. But you better to have a few extras just in case.
January 31st is fine. Once the number of people is meet each one would have to contact me either phone, e-mail or using our shopping cart with payment. What we would do is get each member to pay for their own set plus their shipping and we ship it to them. What I do on a GP is gather every persons info as they order and hold it, we will not charge anyones card until I have received 10 or 20 orders which ever you choose it to be. We will also not ship until all payments are received, this way we assure it goes through.
If you have anymore questions please ask. Thanks again!
Ryan"
Does this sound good?
We got 11 whos gonna be 12? We have just over a month untill the order.
Please comment.
epsecially:
Hotrod87camaro
92KrvZ28
Grizzlee
Brdofpry85ta
Last edited by irocstang; 12-19-2005 at 05:01 PM.
#40
Junior Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
Join Date: Jul 2003
Location: Canada, B.C.
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 IROC t-tops
Engine: 5.7 (350 tpi)
Transmission: Auto (700R4)
Axle/Gears: 9 bolt disc with 3.73's
Hey Irocstang
Thanks for the reply, I have welded a bit with my old mig welder so I think I will try welding in the sfc connectors myself
(If I have to farm out all the work on my car I might as well have bought a new car)
I am assuming you have ordered from the U.S.A. quite a bit more than I have so just to break it down it's $169.99 for the SFC plus $91.00 for shipping plus brokerage??
I am also from British Columbia (Kitimat)
Do I ask UMI for a shipping quote? Do we call UMI with VISA or MASTERCARD (PAYPAL)?
I need to get a firm price with everything included so I can set aside the $$$ SFC + SHIPPING + APPROX BROKERAGE.
Either way I am going to need/want SFC not that I am pushing huge amounts of power but I need a solid foundation for future upgrades.
I am aiming for 300+ HP because I want I car that is not too radical and that I can take the wife and kids out in for an evening of fun.
Irocstang once I get a firm landed price to the door then I will commit (come hell or high water) I just have to OK it with the BOSS A.K.A "My Wife"![Stick Out Tongue](https://www.thirdgen.org/forums/images/smilies/tongue.gif)
Irocstang I don't know if it's been said yet but thanks for all the hard work and running around!
Thanks for the reply, I have welded a bit with my old mig welder so I think I will try welding in the sfc connectors myself
(If I have to farm out all the work on my car I might as well have bought a new car)
I am assuming you have ordered from the U.S.A. quite a bit more than I have so just to break it down it's $169.99 for the SFC plus $91.00 for shipping plus brokerage??
I am also from British Columbia (Kitimat)
Do I ask UMI for a shipping quote? Do we call UMI with VISA or MASTERCARD (PAYPAL)?
I need to get a firm price with everything included so I can set aside the $$$ SFC + SHIPPING + APPROX BROKERAGE.
Either way I am going to need/want SFC not that I am pushing huge amounts of power but I need a solid foundation for future upgrades.
I am aiming for 300+ HP because I want I car that is not too radical and that I can take the wife and kids out in for an evening of fun.
Irocstang once I get a firm landed price to the door then I will commit (come hell or high water) I just have to OK it with the BOSS A.K.A "My Wife"
![Stick Out Tongue](https://www.thirdgen.org/forums/images/smilies/tongue.gif)
Irocstang I don't know if it's been said yet but thanks for all the hard work and running around!
#41
Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (1)
Join Date: May 2004
Location: New Port Richey, Fl
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Trans Am
Engine: 6.6 at least
Transmission: T-56 (waiting)
Axle/Gears: 9" w/4.56 & spool (4 now)
You can count me in
Just give us a heads up on when they want payment.
Thanks to Irocstang for setting up this GP...
![thumbs up](https://www.thirdgen.org/forums/images/smilies/thumbsup.gif)
Just give us a heads up on when they want payment.
Thanks to Irocstang for setting up this GP...
![thank you](https://www.thirdgen.org/forums/images/smilies/thanks.gif)
![good job!](https://www.thirdgen.org/forums/images/smilies/goodjob.gif)
Last edited by brdofpry85ta; 12-19-2005 at 06:49 PM.
#42
Supreme Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (3)
Join Date: May 2005
Location: Southern IL
Posts: 1,942
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 GTA "Cocaine"
Engine: 350 tpi
Transmission: 700r4
Axle/Gears: 3.27
there was a comment made earlier that has bothered me and I wiss to address it.
If you just want to be part of the party but do not want to buy a cup, stay at home.
basically, I am serious about getting these sfc and I hope that all of you are as equally serious.
I am not pointing any fingers or questioning anyones intent. What I am trying to say is if you are interested but not 100% sure than you have untill the end of jan to figure it out.
This is not a wish list.
Now that I am done Bah-humbuggin. Everyone have a happy holiday.
If you just want to be part of the party but do not want to buy a cup, stay at home.
basically, I am serious about getting these sfc and I hope that all of you are as equally serious.
I am not pointing any fingers or questioning anyones intent. What I am trying to say is if you are interested but not 100% sure than you have untill the end of jan to figure it out.
This is not a wish list.
Now that I am done Bah-humbuggin. Everyone have a happy holiday.
#43
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
questions ansewerd
email Ryan at
support@umiperformance.com
and tell him that you are interested in the group purchase being organized through Robert.
-Send Your Address Including postal code to him in this email. Ask how much shipping will be to your location. Mine (vancouver island, BC) is 91.30 (american)
People ordering outside the state of PA in the USA do not have to pay sales tax.
All of us canadians have to pay UPS brokrage fees for crossing the boarder (customs..import tax ect). A bonus though to this is ordering through ups your sfcs are fully insured. If they are lost in transit or something you dont have to worry. Umi will send you new ones for no additional price (UPS embersses umi and umi sends new ones). I have ordered online lots and the best way for us canadians is UPS. I am not sure about what the brokarage fee will be ill look into it though and get back to you.
Also ask ryan at UMI for a total price from both the following:
-if there is 10-15 people in the GP (169.99 per set) what will the total cost be, not including UPS brokrage?
-if there is 20 people or more in the GP (159.99) what will the total cost be, not including UPS brokrage?
note: ryan will work out the cost of shipping via your address and postal code and add it to each of the above. Hell then send u a reply with the total cost, not including UPS brokrage. (his reply will be in american funds..you then have to calculate the total into canadian funds..not including ups brokrage) This is a good link to translate funds through:
http://www.x-rates.com/calculator.html
I've also included how much it will cost me for each of the ifs mentioned above.
If 10 people: 261.29 american(shipping included). 303.96 Canadian + UPS Brokrage.
If 20 people: 251.29 american(shipping included). 292.93 Canadian + UPS Brokrage.
I cannot see them costing me more than 100 bucks for brokrage.
Hope this helps and ill get back to you on the brokrage costs to canada soon. Any comments?
support@umiperformance.com
and tell him that you are interested in the group purchase being organized through Robert.
-Send Your Address Including postal code to him in this email. Ask how much shipping will be to your location. Mine (vancouver island, BC) is 91.30 (american)
People ordering outside the state of PA in the USA do not have to pay sales tax.
All of us canadians have to pay UPS brokrage fees for crossing the boarder (customs..import tax ect). A bonus though to this is ordering through ups your sfcs are fully insured. If they are lost in transit or something you dont have to worry. Umi will send you new ones for no additional price (UPS embersses umi and umi sends new ones). I have ordered online lots and the best way for us canadians is UPS. I am not sure about what the brokarage fee will be ill look into it though and get back to you.
Also ask ryan at UMI for a total price from both the following:
-if there is 10-15 people in the GP (169.99 per set) what will the total cost be, not including UPS brokrage?
-if there is 20 people or more in the GP (159.99) what will the total cost be, not including UPS brokrage?
note: ryan will work out the cost of shipping via your address and postal code and add it to each of the above. Hell then send u a reply with the total cost, not including UPS brokrage. (his reply will be in american funds..you then have to calculate the total into canadian funds..not including ups brokrage) This is a good link to translate funds through:
http://www.x-rates.com/calculator.html
I've also included how much it will cost me for each of the ifs mentioned above.
If 10 people: 261.29 american(shipping included). 303.96 Canadian + UPS Brokrage.
If 20 people: 251.29 american(shipping included). 292.93 Canadian + UPS Brokrage.
I cannot see them costing me more than 100 bucks for brokrage.
Hope this helps and ill get back to you on the brokrage costs to canada soon. Any comments?
Last edited by irocstang; 12-19-2005 at 07:00 PM.
#44
Supreme Member
Join Date: Jul 2005
Location: Miramichi, NB
Posts: 1,423
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Monte Carlo
Engine: Blown 489
Transmission: TH400
Axle/Gears: 9" 370s
yeah it was a good idea doing this.
i also live in canda, if we get 20 people it will be 159.99$ + 91.00$ for shipping, NOW, depends who they ship through will depend how much they charge for duty taxes.
UPS = 2 * USPS
as the price is not that high 159$, taxes will be on that price.
i just bought eibach sportlines from the USA last week, they will be here tomorrow morning i called UPS, which is quite expensive but they only go through UPS, because its covered and you can track it, the duty charges were 99.22CAD, and the box weighed 42lbs, and value was 194.00US, it would have been less with USPS, and will be less either way sicne the value is less, and i think they will weigh less then 42lbs.
i also live in canda, if we get 20 people it will be 159.99$ + 91.00$ for shipping, NOW, depends who they ship through will depend how much they charge for duty taxes.
UPS = 2 * USPS
as the price is not that high 159$, taxes will be on that price.
i just bought eibach sportlines from the USA last week, they will be here tomorrow morning i called UPS, which is quite expensive but they only go through UPS, because its covered and you can track it, the duty charges were 99.22CAD, and the box weighed 42lbs, and value was 194.00US, it would have been less with USPS, and will be less either way sicne the value is less, and i think they will weigh less then 42lbs.
Last edited by roughskinjrz; 12-19-2005 at 07:00 PM.
#45
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
UPS
All orders from UMI coming into canada are shipped through UPS not USPS or anything else. People ordering in the states have more options. (Americans ordering....read the other post all the shipping options for you are there).
Good thing to mention for canadians too......at least in my part of canada I can get sfc's yes but not very good ones and they want like 500 bucks plus taxes. Im going with these. I refuse to pay a rediculous price for crap comp engineering ones.
We now have 12 in (read previous list of whos in and add Brdofpry85Ta in. I will later too but i gotta go out for a bit)
Feel free to ask more questions if needed.
I personally cant wait to get my hands of these.
Hope this has been insightfull
IROCSTANG
*No taxes if ordering out of state (PA)
re thanks for setting this up....I want these things as bad as the next guy. your welcome
Good thing to mention for canadians too......at least in my part of canada I can get sfc's yes but not very good ones and they want like 500 bucks plus taxes. Im going with these. I refuse to pay a rediculous price for crap comp engineering ones.
We now have 12 in (read previous list of whos in and add Brdofpry85Ta in. I will later too but i gotta go out for a bit)
Feel free to ask more questions if needed.
I personally cant wait to get my hands of these.
Hope this has been insightfull
IROCSTANG
*No taxes if ordering out of state (PA)
re thanks for setting this up....I want these things as bad as the next guy. your welcome
Last edited by irocstang; 12-21-2005 at 08:11 AM.
#46
Supreme Member
Join Date: Jul 2005
Location: Miramichi, NB
Posts: 1,423
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Monte Carlo
Engine: Blown 489
Transmission: TH400
Axle/Gears: 9" 370s
wow, it took Ryan 30 minutes to respond to my email, shipping to me in Toronto, ON IS ONLY $58.25US!!
#47
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
Names of 12 that are in
Right on 12 are now in
ALL IN ARE: (12 of 20) end date Jan 31/06
Irocstang
Jamon8
Roughskinz
Bluezee
Bigdavesiroc
Camaroracerlt1
4MULA88
Wiseman9986
Formula350sd
87 350
Eternaldarkness
Brdofpry85ta
Questionable are:
Flamingford
Grizzlee
92krvZ28
Hotrod87camaro
ALL IN ARE: (12 of 20) end date Jan 31/06
Irocstang
Jamon8
Roughskinz
Bluezee
Bigdavesiroc
Camaroracerlt1
4MULA88
Wiseman9986
Formula350sd
87 350
Eternaldarkness
Brdofpry85ta
Questionable are:
Flamingford
Grizzlee
92krvZ28
Hotrod87camaro
Last edited by irocstang; 12-19-2005 at 08:41 PM.
#48
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
email from UMI
eceived this email from ryan at UMI
Re: Shipping prices
"Just a few side notes that may help. If anyone wants a shipping quote they are welcome to e-mail me or call at any time and I will respond instantly with a price. Shipping in the 48 States will run any where from $25-$45 and Canada is any where from $55-$100 depending on location. This item has to ship UPS due to the size, they are to large and US Postal Service will not except them.
Hope that helps!
Ryan"
Thought id post this as is may be insightfull
Re: Shipping prices
"Just a few side notes that may help. If anyone wants a shipping quote they are welcome to e-mail me or call at any time and I will respond instantly with a price. Shipping in the 48 States will run any where from $25-$45 and Canada is any where from $55-$100 depending on location. This item has to ship UPS due to the size, they are to large and US Postal Service will not except them.
Hope that helps!
Ryan"
Thought id post this as is may be insightfull
#50
Member
Thread Starter
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
ALMOST AT THE MARK OF 20
Thanks to Faulball67 we now have 13 in on this GP
169.99 per set american till we hit 20. after 20 it will cost us 159.99 per set american. (shipping and ups brokrage not included)
Right on 13 are now in
ALL IN ARE: (13 of 20) end date Jan 31/06
Irocstang
Jamon8
Roughskinz
Bluezee
Bigdavesiroc
Camaroracerlt1
4MULA88
Wiseman9986
Formula350sd
87 350
Eternaldarkness
Brdofpry85ta
Faulball67
Questionable are:
-Driver101 (sent me a pm that said if 10 or more people are in hes in....awaiting a pm from him and a posting on this thread....if so he'll be 14.)
-Flamingford===?????
-Grizzlee======awaiting reply
-92krvZ28=====will commit once we have 20
-Hotrod87camaro===awaiting reply
(Hurry up Questionables times slowly running out)
anyone else interested? questions ansewered on the other post UMI SFC GROUP PURCHASE-----PLEASE READ.
To: Faulball67 thanks for being 13. Only 7 to go untill we hit the 20 mark. Everybody is probably as excited about this as i am now..
questions about committing and purchasing will be ansewered on this posting.
Thanks to all
86IROC91STANG -----obviously the camaro rules.
169.99 per set american till we hit 20. after 20 it will cost us 159.99 per set american. (shipping and ups brokrage not included)
Right on 13 are now in
ALL IN ARE: (13 of 20) end date Jan 31/06
Irocstang
Jamon8
Roughskinz
Bluezee
Bigdavesiroc
Camaroracerlt1
4MULA88
Wiseman9986
Formula350sd
87 350
Eternaldarkness
Brdofpry85ta
Faulball67
Questionable are:
-Driver101 (sent me a pm that said if 10 or more people are in hes in....awaiting a pm from him and a posting on this thread....if so he'll be 14.)
-Flamingford===?????
-Grizzlee======awaiting reply
-92krvZ28=====will commit once we have 20
-Hotrod87camaro===awaiting reply
(Hurry up Questionables times slowly running out)
anyone else interested? questions ansewered on the other post UMI SFC GROUP PURCHASE-----PLEASE READ.
To: Faulball67 thanks for being 13. Only 7 to go untill we hit the 20 mark. Everybody is probably as excited about this as i am now..
questions about committing and purchasing will be ansewered on this posting.
Thanks to all
86IROC91STANG -----obviously the camaro rules.
Last edited by irocstang; 12-20-2005 at 11:28 AM.