[NJ] Aftermarket Camaro Passenger Side Tail Light
#1
Junior Member
Thread Starter
Join Date: Oct 2009
Location: Wyckoff, NJ
Posts: 48
Likes: 0
Received 15 Likes
on
10 Posts
Car: 86 Yellow IROC
Engine: 305 Carb
Transmission: 5 speed
Axle/Gears: 3.23
Aftermarket Camaro Passenger Side Tail Light
Cleaning out some of my 40+ year 3rd Gen Parts Hoarde. Those of you who know me know I NEVER sell anything but then you also know I don't use aftermarket parts, which is the ONLY reason this beauty is up for grabs.
This is an AFTERMARKET Tail Light Assembly NOT an Original GM part!
Extremely Good to Near Perfect Outer Lens. There are a few minor light scuffs, but as the pix show they are nearly impossible to see. First 2 pix showing the entire light straight on was taken with and without flash. The closeups were taken without flash: the first 3 were taken at about a 45 degree angle, the last 3 taken straight on
BETTER than driver quality, I would go as far as to say show quality since if you're putting non-GM parts on your car you're probably not going for 1000 point judging, so it's not going to be scrutinized on the micro level.
Screw posts are tight
I bought it decades ago with a ton of GM parts and have NOT removed it myself. It appears to be 100% perfect with no cracks, chips or other damages.
I will ship ANYWHERE in the World and accept PayPal.
$75 INCLUDING UPS / FedEX SHIPPING TO LOWER 48. Canada & Overseas will be whatever the actual postage costs me.
No flash no outside light source
With flash no outside light
Bottom
Top
Back
Part numbers
taken at an angle
taken at an angle
taken at an angle
straight on
straight on
straight on
This is an AFTERMARKET Tail Light Assembly NOT an Original GM part!
Extremely Good to Near Perfect Outer Lens. There are a few minor light scuffs, but as the pix show they are nearly impossible to see. First 2 pix showing the entire light straight on was taken with and without flash. The closeups were taken without flash: the first 3 were taken at about a 45 degree angle, the last 3 taken straight on
BETTER than driver quality, I would go as far as to say show quality since if you're putting non-GM parts on your car you're probably not going for 1000 point judging, so it's not going to be scrutinized on the micro level.
Screw posts are tight
I bought it decades ago with a ton of GM parts and have NOT removed it myself. It appears to be 100% perfect with no cracks, chips or other damages.
I will ship ANYWHERE in the World and accept PayPal.
$75 INCLUDING UPS / FedEX SHIPPING TO LOWER 48. Canada & Overseas will be whatever the actual postage costs me.
No flash no outside light source
With flash no outside light
Bottom
Top
Back
Part numbers
taken at an angle
taken at an angle
taken at an angle
straight on
straight on
straight on
Thread
Thread Starter
Forum
Replies
Last Post
firebirddude142
Exterior Parts for Sale
0
05-23-2021 07:57 PM
BLURR
Auto Detailing and Appearance
16
03-05-2004 10:20 PM