parting out/trade 85 camaro (raleigh/goldsboro)
#1
Member
Thread Starter
iTrader: (8)
Join Date: Mar 2007
Location: Shreveport Louisianna Barksdale AFB
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
parting out/trade 85 camaro (raleigh/goldsboro)
I can remove the motor and rear end in and pick up in goldsboro...the other items can be removed and delivered to raleigh or surrounding area.
Their is alot of brand new parts on this car. I will take 5 grand cash for the whole car, trade for a motorcycle of equal value or part it out.
Text me 919 244 6903-Jeremy
The picture with the white hood is the MOST recent
85 camaro with a Fresh built 383 stroker motor and a rebuilt 700r4(trans needs to be installed if you buy the car I will install with a new 2400 stall)
99 trans am posi 3:42 10 bolt with ls1 brakes stainless steel brake lines correct thirdgen brake 4 wheel disc porportioning valve
20" 2010 camaro wheels all around with 255/30/20 all around
ENGINE
Motor is a 72 0010 350 4 bolt block.
Bored and stroked to 383 using a :
Rebuilt 200 cc Dart iron eagle heads with 72 cc chambers- they are highly ported with 2.02 valves 5 angle valve job with guideplates and screw in studs
NEW cast Eagle stroker crank
NEW Scat forged I beam rods
NEW SRP high compression dome pistons
NEW Comp nitrous cam .507/.525 lift 113 lsa 240/253 @ .050
NEW SCE Gaskets S11066 - SCE ICS Titan Copper Head Gaskets (225 dollar head gaskets)
NEW Speed o motive dual springs good for .550 lift
NEW Comp cams hardened push rods
NEW Comp Cams Double roller timing chain
NEW summit high flow high volume oil pump
NEW ARP oil pump shaft
NEW Holley 110 gph Fuel Pump
NEW Holley fuel pressure regulator
All NEW Clevite bearings
Moroso 7qt baffled oil pan
NEW Powerforce 8" harmonic balancer
NEW Comp Cams 1.6 magnum roller tip rockers
PULLEYS
NEW Billet crank pulley
NEW Billet power steering pump pulley
BOLTS
NEW poly locks
NEW ARP intake bolts
NEW ARP Rod bolts
NEW ARP main bolts
NEW ARP crank pulley bolts
NEW Moroso Balancer bolt
IGNITION
NEW 8.5mm wire new plugs
NEW High torque mini starter clearenced for the headers
NEW 110 amp chrome alternator with billet pulley
Mid mount Alan grove alternator setup
INTAKE
NEW Holly 750 vac sec carb
Torker 1 single plane intake
NEW K&n 14" round airfilter
14" Chrome air element
COOLING
NEW Champion 3 row aluminum radiator and stock shroud
NEW High flow water pump
NEW lightweight flex fan and 1" spacer
NEW Billet water pump pulley
Chrome thermostat housing
Suspension
New Mid mounted chrome power steering pump
Quick ratio steering box 2 ¼ turns full lock to lock
NEW Spohn torque arm and transmission crossmember with DUAL drive shaft loops
NEW Energy Suspension Poly motor mount
NEW Energy Suspension Poly transmission mount
NEW Founders performance poly lower control arms
NEW Founders LCA relocation brackets
NEW 2" dropzone lowering springs
NEW shocks and struts
Poly adjustable panhard bar
Brakes
LS1 disc rear brakes
NEW flynbye thirdgen to ls1 ebrake cables
Correct proportioning valve for ls1 brakes
REAR END
99 trans am rear end
Exhaust
Hedman long tube headers
NEW RJ's Custom 2.5" true dual mandrel bent over the axle exhaust with STEEDA mufflers and polished aluminum tips (thousand dollar custom exhaust sounds NASTY)
EXTERIOR
92 camaro lip spoiler with 3rd brake light
89 camaro iroc front and rear bumpers with ground effects
Power doors windows wired up but not locks, including two new window motors
Champion hoods 4" cowl hood
Billet aluminum grille
Black turn signal markers and side markers
New front fenders (one has a small dent from working on the car that can easily be popped out)
92 grid taillights in perfect condition
INTERIOR
NEW black hardtop headliner
NEW black hardtop visors
NEW front black carpet
Redone door panels with black suade
BRAND NEW window sweeps and door panel tops (250 bucks by itself)
99 trans am manual center console
good front race seats
good dash/pad with a few small cracks and one corner near driver side with the size of a quarter missing
cavalier steering wheel
leather ebrake handle
decent full black interior
good condition dome lighting
Has a 92 firebird radio pod in good condition with an older aftermarket pioneer headunit
MISC
Sway bars removed
Factory A/C delete heaterbox installed after the full a/c system ducts and all were removed
NEW battery
Wired for subs/amp with 4gauge wiring
I have a BUNCH of extra interior parts, another 700r4 30 spline (blew 3rd and 4th gear) with a brand new 3200 nitrous stall
Their is alot of brand new parts on this car. I will take 5 grand cash for the whole car, trade for a motorcycle of equal value or part it out.
Text me 919 244 6903-Jeremy
The picture with the white hood is the MOST recent
85 camaro with a Fresh built 383 stroker motor and a rebuilt 700r4(trans needs to be installed if you buy the car I will install with a new 2400 stall)
99 trans am posi 3:42 10 bolt with ls1 brakes stainless steel brake lines correct thirdgen brake 4 wheel disc porportioning valve
20" 2010 camaro wheels all around with 255/30/20 all around
ENGINE
Motor is a 72 0010 350 4 bolt block.
Bored and stroked to 383 using a :
Rebuilt 200 cc Dart iron eagle heads with 72 cc chambers- they are highly ported with 2.02 valves 5 angle valve job with guideplates and screw in studs
NEW cast Eagle stroker crank
NEW Scat forged I beam rods
NEW SRP high compression dome pistons
NEW Comp nitrous cam .507/.525 lift 113 lsa 240/253 @ .050
NEW SCE Gaskets S11066 - SCE ICS Titan Copper Head Gaskets (225 dollar head gaskets)
NEW Speed o motive dual springs good for .550 lift
NEW Comp cams hardened push rods
NEW Comp Cams Double roller timing chain
NEW summit high flow high volume oil pump
NEW ARP oil pump shaft
NEW Holley 110 gph Fuel Pump
NEW Holley fuel pressure regulator
All NEW Clevite bearings
Moroso 7qt baffled oil pan
NEW Powerforce 8" harmonic balancer
NEW Comp Cams 1.6 magnum roller tip rockers
PULLEYS
NEW Billet crank pulley
NEW Billet power steering pump pulley
BOLTS
NEW poly locks
NEW ARP intake bolts
NEW ARP Rod bolts
NEW ARP main bolts
NEW ARP crank pulley bolts
NEW Moroso Balancer bolt
IGNITION
NEW 8.5mm wire new plugs
NEW High torque mini starter clearenced for the headers
NEW 110 amp chrome alternator with billet pulley
Mid mount Alan grove alternator setup
INTAKE
NEW Holly 750 vac sec carb
Torker 1 single plane intake
NEW K&n 14" round airfilter
14" Chrome air element
COOLING
NEW Champion 3 row aluminum radiator and stock shroud
NEW High flow water pump
NEW lightweight flex fan and 1" spacer
NEW Billet water pump pulley
Chrome thermostat housing
Suspension
New Mid mounted chrome power steering pump
Quick ratio steering box 2 ¼ turns full lock to lock
NEW Spohn torque arm and transmission crossmember with DUAL drive shaft loops
NEW Energy Suspension Poly motor mount
NEW Energy Suspension Poly transmission mount
NEW Founders performance poly lower control arms
NEW Founders LCA relocation brackets
NEW 2" dropzone lowering springs
NEW shocks and struts
Poly adjustable panhard bar
Brakes
LS1 disc rear brakes
NEW flynbye thirdgen to ls1 ebrake cables
Correct proportioning valve for ls1 brakes
REAR END
99 trans am rear end
Exhaust
Hedman long tube headers
NEW RJ's Custom 2.5" true dual mandrel bent over the axle exhaust with STEEDA mufflers and polished aluminum tips (thousand dollar custom exhaust sounds NASTY)
EXTERIOR
92 camaro lip spoiler with 3rd brake light
89 camaro iroc front and rear bumpers with ground effects
Power doors windows wired up but not locks, including two new window motors
Champion hoods 4" cowl hood
Billet aluminum grille
Black turn signal markers and side markers
New front fenders (one has a small dent from working on the car that can easily be popped out)
92 grid taillights in perfect condition
INTERIOR
NEW black hardtop headliner
NEW black hardtop visors
NEW front black carpet
Redone door panels with black suade
BRAND NEW window sweeps and door panel tops (250 bucks by itself)
99 trans am manual center console
good front race seats
good dash/pad with a few small cracks and one corner near driver side with the size of a quarter missing
cavalier steering wheel
leather ebrake handle
decent full black interior
good condition dome lighting
Has a 92 firebird radio pod in good condition with an older aftermarket pioneer headunit
MISC
Sway bars removed
Factory A/C delete heaterbox installed after the full a/c system ducts and all were removed
NEW battery
Wired for subs/amp with 4gauge wiring
I have a BUNCH of extra interior parts, another 700r4 30 spline (blew 3rd and 4th gear) with a brand new 3200 nitrous stall
#3
Member
Thread Starter
iTrader: (8)
Join Date: Mar 2007
Location: Shreveport Louisianna Barksdale AFB
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: parting out/trade 85 camaro (raleigh/goldsboro)
$1000 with adapters right size tires for a thirdgen and the rear wheels clearenced to fit over the hub of the 4th gen rear. pm me if your interested
#4
Junior Member
Join Date: May 2005
Location: Fayetteville, NC
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 1LE CAMARO
Engine: 383 TPI W/NOS Fogger Kit
Transmission: WC T-5
Axle/Gears: 3.42
Re: parting out/trade 85 camaro (raleigh/goldsboro)
Cowl hood price picked up?
#5
Member
Thread Starter
iTrader: (8)
Join Date: Mar 2007
Location: Shreveport Louisianna Barksdale AFB
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: parting out/trade 85 camaro (raleigh/goldsboro)
250 and a stock hood
#7
Member
Thread Starter
iTrader: (8)
Join Date: Mar 2007
Location: Shreveport Louisianna Barksdale AFB
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: parting out/trade 85 camaro (raleigh/goldsboro)
car is located at seymour johnson AFB goldsboro nc
Trending Topics
#8
Member
Re: parting out/trade 85 camaro (raleigh/goldsboro)
Where the hell were you 2 months ago? I just PCS'd to Edwards from Seymour. I would have bought some parts.
#9
Member
Thread Starter
iTrader: (8)
Join Date: Mar 2007
Location: Shreveport Louisianna Barksdale AFB
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: parting out/trade 85 camaro (raleigh/goldsboro)
lol 2 months ago the car was at the hobby shop at seymour I was putting the transmission in during my free time. Poor thing just couldnt handle this motor
#10
Member
iTrader: (7)
Join Date: Nov 2010
Location: portland, michigan
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 iroc-z28
Engine: 049 headed bbc 4?? C.I.D
Transmission: T56
Axle/Gears: 3:73 posi
Re: parting out/trade 85 camaro (raleigh/goldsboro)
If I can make it down that way soon I'll take them. I just think that shipping would be outrageous on these
#11
Member
iTrader: (2)
Join Date: Mar 2011
Location: Eastern NC
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 sport coupe
Engine: 355 sbc
Transmission: 700R4
Axle/Gears: soon 4th gen 3.23 w/ Posi
Re: parting out/trade 85 camaro (raleigh/goldsboro)
did the springs lower the car 2 inches with the 383? reason I ask is i'm trying to lower my front but don't want quite that much dropped but I have a 305 so it may not lower as much....maybe. But I'm interested in the struts shocks and the springs. I live in New Bern, how much would you want for those 3 things?
#12
Member
iTrader: (2)
Join Date: Mar 2011
Location: Eastern NC
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 sport coupe
Engine: 355 sbc
Transmission: 700R4
Axle/Gears: soon 4th gen 3.23 w/ Posi
Re: parting out/trade 85 camaro (raleigh/goldsboro)
Also do you still have the interior sail panels? are they black as well? possibly interested in them and the visors.
#14
#15
Member
iTrader: (1)
Join Date: Sep 2011
Location: Birmingham, Alabama!!!
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Iroc-Z
Engine: 350 TPI; Stock internals
Transmission: 700r4; TCI-CPVB; BW Hi-Frition
Axle/Gears: 4th gen 7.5 w/ 3:42 gear
Re: parting out/trade 85 camaro (raleigh/goldsboro)
TXT sent on tranny/Stall
#16
Junior Member
Join Date: Jan 2010
Location: Austin, TX
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Car: 96 SS, 72 SS, 06 TBSS
Re: parting out/trade 85 camaro (raleigh/goldsboro)
How much for the springs and the black carpet? Shipped to 78749. Also might be interested in the front bumper and chin spoiler..
Thread
Thread Starter
Forum
Replies
Last Post