[NY] Parting out 1986 Trans Am White
05-01-2010, 03:12 AM
#1
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Parting out 1986 Trans Am White
In the next couple of weeks (2 or 3 weeks) I will start parting out my 1986 Trans Am with "T" tops.
The following is NOT with this car
1) Title
2) Motor
3) Trans
4) Hood
The following is damaged or not repairable
1) Front nose cover (bottom center torn)
2) Rear bumper cover damaged due to my trailer
3) right front fender has a dent at the marker light
4) Driver side door skin small tear at mirror
5) Driver side ground effects has a hole at the fender
6) Spoiler is real rough as usual with these cars
7) Overflow tank is shot
The interior is in rough shape due to the smell. The car was under a tarp for 2 years in the weather and has developed a moldy smell. I'm sure with a good cleaning and airing it would be ok and it might clear up after I start striping the car but I will update as time goes on.
I need to move the car from it's current location to my shop thus the 2 - 3 week delay.
The wheels are not show quality but they are in good shape.
The tail lights are in good shape.
It has the posi rear end (I'll get the info when I remove it from the car)
Headlight assembles do work (I tested them before it went under the tarp)
I will post pictures as soon as I find my camera. I will also post pics of everything as I remove the parts.
Wife says this project MUST go before I get my other project and this is a good way to fund it.
I will sell anything that can be removed from the car. With that said I would prefer local pickup of "bigger" items but I will look in to shipping.
YOU will pay for the freight and packing (some items will be very pricey). Also, I'm not sure how to pack some items such as glass (windshield, rear hatch, door glass and "t"tops), rear axle, front sub-frame Etc. so if you have any ideas and there is no interest locally, let me know and I will do my best. I strongly recommend insurance.
If you are interested in anything post a reply to this thread and I will reply as soon as I can (keep in mind I am not always on this forum and may not reply for a day or two).
Thanks
The following is NOT with this car
1) Title
2) Motor
3) Trans
4) Hood
The following is damaged or not repairable
1) Front nose cover (bottom center torn)
2) Rear bumper cover damaged due to my trailer
3) right front fender has a dent at the marker light
4) Driver side door skin small tear at mirror
5) Driver side ground effects has a hole at the fender
6) Spoiler is real rough as usual with these cars
7) Overflow tank is shot
The interior is in rough shape due to the smell. The car was under a tarp for 2 years in the weather and has developed a moldy smell. I'm sure with a good cleaning and airing it would be ok and it might clear up after I start striping the car but I will update as time goes on.
I need to move the car from it's current location to my shop thus the 2 - 3 week delay.
The wheels are not show quality but they are in good shape.
The tail lights are in good shape.
It has the posi rear end (I'll get the info when I remove it from the car)
Headlight assembles do work (I tested them before it went under the tarp)
I will post pictures as soon as I find my camera. I will also post pics of everything as I remove the parts.
Wife says this project MUST go before I get my other project and this is a good way to fund it.
I will sell anything that can be removed from the car. With that said I would prefer local pickup of "bigger" items but I will look in to shipping.
YOU will pay for the freight and packing (some items will be very pricey). Also, I'm not sure how to pack some items such as glass (windshield, rear hatch, door glass and "t"tops), rear axle, front sub-frame Etc. so if you have any ideas and there is no interest locally, let me know and I will do my best. I strongly recommend insurance.
If you are interested in anything post a reply to this thread and I will reply as soon as I can (keep in mind I am not always on this forum and may not reply for a day or two).
Thanks
05-01-2010, 09:40 AM
#4
Member
Join Date: Sep 2007
Location: Long Island, NY
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 Camaro
Engine: 350 punch out .060 to 360ci
Transmission: 700R4 worked
Axle/Gears: 410 Posi
Re: Parting out 1986 Trans Am White
where are you located in NY? how much do u want for the rear hatch, and do u have pictures of it. My email is Rattlesnake41389@aol.com please email me some pics im in need of a rear hatch with a 3rd brake light
Thanks
Scott
Thanks
Scott
05-02-2010, 09:33 AM
#6
Junior Member
Join Date: Mar 2010
Location: Fernandina Beach/Amelia Island Florida ***Home of the Concours d'Elegance Car Show
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Car: Many 3rd gen F-bodies
Engine: 350/5.7 litre Tuned Port Injection
Transmission: 700R4
Axle/Gears: it varies
Re: Parting out 1986 Trans Am White
I need the following parts for my 85 TA; a center console with cover (if possible), a drivers side front hood grille, a drivers side headlight motor (3-wire), a power trunk pull-down motor. I also need another power trunk pull-down motor for 1 of my 89 TTA's. Please reply with the condition and price of what you have available? NO shipping problem with these small/lightweight items.... Shipping to N.E. Florida 32034. Thanks, Firehawk95
05-04-2010, 07:45 AM
#7
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out 1986 Trans Am White
Ok folks I have found my camera and took some quick photos of what I could. I'm planning to get the TA to my other shop this weekend and I will start parting it next week.
I've replied via PM to those who are looking for parts.
Looks like I will need to add a few posts to get all the pictures up...
I've replied via PM to those who are looking for parts.
Looks like I will need to add a few posts to get all the pictures up...
Trending Topics
05-04-2010, 07:47 AM
#8
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out 1986 Trans Am White
Set 2
Yes the overhead console does have the flashlight and as far as I know it still works. When I remove the overhead and photograph it I will take pics of the flashlight working...
Yes the overhead console does have the flashlight and as far as I know it still works. When I remove the overhead and photograph it I will take pics of the flashlight working...
05-04-2010, 07:52 AM
#10
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out 1986 Trans Am White
Set 4
Passenger side fender dent, nose has a tear at the lower center but you can't see it in the pic, Some of the driver side door damage
Passenger side fender dent, nose has a tear at the lower center but you can't see it in the pic, Some of the driver side door damage
05-05-2010, 10:55 PM
#14
Re: Parting out 1986 Trans Am White
power mirrors? If so, what's shipping to 94112? Truth be told I only need the mirror glass backing plates, but since no one will sell just those, give me a price for the two mirrors if they are power. Thanks
Will
Will
05-06-2010, 10:55 AM
#15
Member
Join Date: Sep 2007
Location: Long Island, NY
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 Camaro
Engine: 350 punch out .060 to 360ci
Transmission: 700R4 worked
Axle/Gears: 410 Posi
Re: Parting out 1986 Trans Am White
Where are you located in NY? And do you have a few close ups of the hatch?
05-08-2010, 07:05 AM
#16
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out 1986 Trans Am White
I need to double check them and I will get back to you tomorrow night...
05-08-2010, 07:06 AM
#17
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out 1986 Trans Am White
UPDATE:
PM's replied...
I will be moving the car today and will start going through it tomorrow...
Second Update for today:
Car has been moved. Will start parting the car tomorrow and will work on it during the week...
PM's replied...
I will be moving the car today and will start going through it tomorrow...
Second Update for today:
Car has been moved. Will start parting the car tomorrow and will work on it during the week...
Last edited by Shadow-D; 05-08-2010 at 04:50 PM.
05-09-2010, 08:13 PM
#19
Member
Join Date: Jan 2004
Location: silverton/salem, oregon
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Trans am
Engine: 350 TPI
Transmission: built 700R4
Axle/Gears: BW 9 bolt posi w/ disc
Re: Parting out 1986 Trans Am White
how much for the center console?
also, what kind of condition is the center piece of the taillights in?
also, what kind of condition is the center piece of the taillights in?
05-10-2010, 07:47 AM
#20
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out 1986 Trans Am White
For those that I have not gotten back to, I have been testing the parts and taking pics and videos. Some items I'm still trying to figure what a fair price is for them.
I had my better half take a bunch of photos of the car and parts yesterday as I removed some parts and I will post the pics on Photobucket.com as there are over 100 pics and I don't want to load this thread with that many pics...
I've also gotten a few requests for the center taillight section and to be honest with everyone, I would rather sell the taillights as a set due to their good condition as you will see in the pics. I will clean them up and take more pics of them this week.
As stated, I have started to remove some of the parts on the car but I didn't get as far as I wanted yesterday seeing that it was Mother's Day and I had plans for the afternoon.
I will be working on the car during the week but some of the parts may take a bit longer to take off due to them not coming off as easy as I thought or I just don't know how to remove them without damaging them...
I will be working on the car this weekend as well and if any of the locals are interested in picking up any parts I will be available...
As soon as the videos and pics are posted, I will post the links...
Thanks
Darrin
I had my better half take a bunch of photos of the car and parts yesterday as I removed some parts and I will post the pics on Photobucket.com as there are over 100 pics and I don't want to load this thread with that many pics...
I've also gotten a few requests for the center taillight section and to be honest with everyone, I would rather sell the taillights as a set due to their good condition as you will see in the pics. I will clean them up and take more pics of them this week.
As stated, I have started to remove some of the parts on the car but I didn't get as far as I wanted yesterday seeing that it was Mother's Day and I had plans for the afternoon.
I will be working on the car during the week but some of the parts may take a bit longer to take off due to them not coming off as easy as I thought or I just don't know how to remove them without damaging them...
I will be working on the car this weekend as well and if any of the locals are interested in picking up any parts I will be available...
As soon as the videos and pics are posted, I will post the links...
Thanks
Darrin
05-10-2010, 08:11 AM
#21
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out 1986 Trans Am White
Photos uploaded...
http://s164.photobucket.com/albums/u25/Shadow-D/TA/
Videos uploaded...
http://www.youtube.com/user/DNE045#g/u
http://s164.photobucket.com/albums/u25/Shadow-D/TA/
Videos uploaded...
http://www.youtube.com/user/DNE045#g/u
05-12-2010, 08:42 AM
#25
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out 1986 Trans Am White
All PM's replied...
I'm still planning to work on the car again this weekend...
For the local members: If you want to come to the car let me know when you would like to via PM...
I'm still planning to work on the car again this weekend...
For the local members: If you want to come to the car let me know when you would like to via PM...
05-22-2010, 12:58 PM
#28
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out 1986 Trans Am White
I will be at the garage working on the car tomorrow. If any of the local people are interested in coming out to get some parts, I think I have or will have just about everything ready to go that has been asked for.
Shoot me a PM and I will give you my Cell # so you can call me...
Thanks
Darrin
Shoot me a PM and I will give you my Cell # so you can call me...
Thanks
Darrin
05-24-2010, 06:24 AM
#31
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out 1986 Trans Am White
Ok folks, here is the deal.
I need to get the car out of it's present location by the 12th to make room for the next project.
I have had a few local members asking for parts but I have not heard anything from them in a couple of weeks.
To the local members, if you are still interested in the parts shoot me a message.
Thanks
Darrin
I need to get the car out of it's present location by the 12th to make room for the next project.
I have had a few local members asking for parts but I have not heard anything from them in a couple of weeks.
To the local members, if you are still interested in the parts shoot me a message.
Thanks
Darrin
05-24-2010, 06:47 AM
#32
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out 1986 Trans Am White
Also I have more pictures that I will be posting tonight on my photobucket page and I will update this page when they are up.
I know there are some other members who asked for parts that were not spoken for yet and I have not forgotten about you, I just haven't had a chance to get the prices.
I have a list of parts for members and I will be working on that this week when I can.
I know there are some other members who asked for parts that were not spoken for yet and I have not forgotten about you, I just haven't had a chance to get the prices.
I have a list of parts for members and I will be working on that this week when I can.
05-25-2010, 07:16 AM
#33
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out 1986 Trans Am White
Sorry for the delay, I had a few things come up lastnight and wasn't able to upload the pics... Pics are now being uploaded, they should be ready for viewing in the next 15 minutes at the same link stated above.
As you can see the interior looks to be in good shape and just needs a good cleaning. The moldy smell that I mentioned is just about gone so I will say it is safe to sell the interior.
As you can see the interior looks to be in good shape and just needs a good cleaning. The moldy smell that I mentioned is just about gone so I will say it is safe to sell the interior.
05-26-2010, 07:03 AM
#34
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out 1986 Trans Am White
Ok folks I have not heard from anyone that wanted parts lately (some in 2 weeks). I understand you may have other things going on but if you still want the parts please let me know this week.
Again I will be working on pulling parts off the car this Sunday after 1PM
Again I will be working on pulling parts off the car this Sunday after 1PM
05-28-2010, 05:57 AM
#36
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out 1986 Trans Am White
I would like to sell them as a set if I can...
05-29-2010, 10:13 AM
#37
Member
iTrader: (4)
Join Date: Oct 2009
Location: CT
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Firebird Formula
Engine: 5.7 TPI
Transmission: 700r4
Axle/Gears: 3.27 posi 9 bolt
Re: Parting out 1986 Trans Am White
how much for the rear spoiler and metal rear hatch lid? Assuming the spoiler is aftermarket fiberglass or is it original rubber unit? Don't need the glass though.
06-03-2010, 12:05 PM
#38
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out 1986 Trans Am White
The spoiler is the original spoiler and I have the hatch off the car ready for sale...
I have not heard from any of the local members who expressed interest in the parts so at this time ALL PARTS are up for grabs. If you are interested in anything send me a PM and I will reply.
I have not heard from any of the local members who expressed interest in the parts so at this time ALL PARTS are up for grabs. If you are interested in anything send me a PM and I will reply.
06-11-2010, 04:44 PM
#42
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
06-12-2010, 04:32 PM
#43
Supreme Member
iTrader: (5)
Join Date: Sep 2004
Location: Casselberry, FLA
Posts: 2,771
Likes: 0
Received 5 Likes
on
5 Posts
Car: 88 V6 'bird/89TBI bird/85 T/A
Engine: 2.8/TBI/TPI
Transmission: V8 T-5/700R4 x2
Axle/Gears: 3.42 open/2.73 open/ 3.27 9 bolt
Re: Parting out 1986 Trans Am White
did you sell the headlights yet? PM me with the details, and if not, the price of the LH sent to 33809... and the price of both...
Thanks!!
Thanks!!
06-18-2010, 07:21 PM
#44
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out 1986 Trans Am White
First off I need to apologies to everyone for not getting back to you sooner, I've had a lot going on the last couple of weeks (I got married) and have not even been near the car. I am going out of town tomorrow to get my next project. I might be able to get to the car Sunday but I again have a few things going on...
EVERYTHING is still for sale and now up for grabs except for the members that have contacted me within the last couple of weeks, I still need to get shipping quotes for all of you...
The link to the photos earlier in this thread has ALL pictures I have of the parts... Look there first and if you still need pictures let me know and I will do my best to get them up ASAP.
Again I'm sorry for the delays...
Darrin
EVERYTHING is still for sale and now up for grabs except for the members that have contacted me within the last couple of weeks, I still need to get shipping quotes for all of you...
The link to the photos earlier in this thread has ALL pictures I have of the parts... Look there first and if you still need pictures let me know and I will do my best to get them up ASAP.
Again I'm sorry for the delays...
Darrin
06-28-2010, 07:00 AM
#45
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out 1986 Trans Am White
Well time has not been too kind to me and I haven't been able to get to the shop in weeks... I think the best thing at this point for everyone is for me to sell local pick up... I know some of you have been wanting me to ship parts out but I just haven't had the time lately as I've had a lot of stuff going on in my life that has prevented me from doing much of anything car related.
08-05-2010, 01:05 PM
#48
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Schenectady, NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out 1986 Trans Am White
Ok folks, I still have this car and all parts. I'd really like to get this thing out of the shop so that I can bring my other project in and get some parts for it. Shipping isn't an option right now, I'm sorry, so all you local members let me know what you need...
Thanks
Shadow-D
Thanks
Shadow-D