Gold lace GTA rear wheels
#1
Junior Member
Thread Starter
Join Date: Apr 2004
Location: Dallastown, pa
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Irocz
Engine: 355 Stealthram
Transmission: 5speed
Axle/Gears: Stock 10bolt 3.73 posi
Gold lace GTA rear wheels
Hey guys, i am starting to clean out my garage and found that i still have the rear wheels off my 89 GTA which i no longer have. There the gold lace 16's, in decent shape, the worst part of them are some corrosion where the weights were on the outside lip, normal scuffs. I do not know where the center caps are tho, i can ship anywhere in the U.S. please make offer. If you need anymore photos of them let me know and i can email them to you plus your zip to figure shipping.
I also have the headers from my prostreet 83 camaro 383. These are Stahl custom headers, 2" primary 3 1/2 collectors, with the adapter plate to bolt up to your standard chevy head exhaust bolt pattern and the headers bolt to them with the large bolt pattern. The rear tubes # 7 & 8 exit though the wheel well and follow down to mate back up with the other 3 then slip on the collector, it sounds worse then it really is. They flow very well, handled my engine putting out nearly 1000hp with the bottle, i paid over $1000.00 for them and only have about 1500 miles on them, iam still working on cleaning them up but if your interested i can sent pic, i really cant go lower then $500.00 for the set.
Full blown race preped power glide from the car as well, over $2500 invested in go fast goodies installed throughout, 2.13 low gear setup fully done, with CSR sfi super sheild, trany cooler with braided lines, i think it was a 3500 or 4000 shall ill have to get all the numbers off the parts if you are interested, braided flexable dip stick, Hurst quarter stick with reverse lockout, full manual shifts, again only about 1500 miles. I'll go as low as $750.00.
I'll have to get pic together for the headers and trany, but figured id list them with the wheels to see if anyone has an interest. Thanks Chad
I also have the headers from my prostreet 83 camaro 383. These are Stahl custom headers, 2" primary 3 1/2 collectors, with the adapter plate to bolt up to your standard chevy head exhaust bolt pattern and the headers bolt to them with the large bolt pattern. The rear tubes # 7 & 8 exit though the wheel well and follow down to mate back up with the other 3 then slip on the collector, it sounds worse then it really is. They flow very well, handled my engine putting out nearly 1000hp with the bottle, i paid over $1000.00 for them and only have about 1500 miles on them, iam still working on cleaning them up but if your interested i can sent pic, i really cant go lower then $500.00 for the set.
Full blown race preped power glide from the car as well, over $2500 invested in go fast goodies installed throughout, 2.13 low gear setup fully done, with CSR sfi super sheild, trany cooler with braided lines, i think it was a 3500 or 4000 shall ill have to get all the numbers off the parts if you are interested, braided flexable dip stick, Hurst quarter stick with reverse lockout, full manual shifts, again only about 1500 miles. I'll go as low as $750.00.
I'll have to get pic together for the headers and trany, but figured id list them with the wheels to see if anyone has an interest. Thanks Chad
#2
Member
iTrader: (1)
Join Date: Nov 2003
Location: TX
Posts: 412
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Firebird SE
Engine: 388 sbc, Brodix Track 1s
Transmission: turbo 350 transmission
Axle/Gears: 4.10 gears
GOLD GTA WHEELS
I'll give $125 for the wheels shipped to 60181.
Payment sent for GTA wheels.
Payment sent for GTA wheels.
Last edited by mcbchild; 05-24-2006 at 12:28 PM.
Thread
Thread Starter
Forum
Replies
Last Post
1992rs/ss
Engine/Drivetrain/Suspension Parts for Sale
16
01-28-2016 09:58 PM
kah992
Engine/Drivetrain/Suspension Parts for Sale
2
08-19-2015 02:55 PM