View Poll Results: Which muffler has the best performace and sound?
Flowmaster
18
36.73%
Spintech
28
57.14%
Other (Please specify your poinion in a reply to this post)
3
6.12%
Voters: 49. You may not vote on this poll
Spintech or Flowmaster Mufflers?
#1
Senior Member
Thread Starter
Spintech or Flowmaster Mufflers?
I am looking at a cat back system that has the option of a spintech or flowmastr muffler. I have heard that the spintechs sound great and perform just as well i have not heard as well about the flomaster. Which do you think is better? I care mostly about sound and performace, and i like loud really loud as long as it is still leagal
I would also extremely be thankfull for any sound or video clips you could post or e-mail me at Raptere@aol.com
Raptere
I would also extremely be thankfull for any sound or video clips you could post or e-mail me at Raptere@aol.com
Raptere
Last edited by raptere; 04-24-2003 at 10:32 AM.
#2
Member
Join Date: Aug 2002
Location: kansas
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 Camaro
Engine: 355
Transmission: 700R4
i assume youre talking about the mufflex catbacks. i think they have sound clips on their site. you might make sure and check the mufflers they use are street legal if your car will be inspected. they may not be, but i doubt youd ever get caught. anyway, my vote is for the flowmaster.
#3
Supreme Member
Join Date: Mar 2001
Location: Renton, WA
Posts: 2,262
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro, 1986 Trans Am
Engine: 5.0L carbed and 5.0L TPI
Transmission: TH700R4
Axle/Gears: 3.23 and 3.27 posi
I had a Flowmaster Cat-back and muffler on my '85 Z28. I absolutely loved it! Made my 305 sound like a big block!
#4
Member
Join Date: Aug 2001
Location: Hillsborough, NJ, USA
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1996 Jeep Cherokee
Engine: 4.0
Transmission: 5 speed
I have a Flowmaster exhaust on my car and it sounds really great. It's really loud when I get on it and pretty loud when idleing. I would say go with Flowmaster.
#5
Senior Member
Join Date: Jul 2001
Location: Louisville Kentucky U.S.A.
Posts: 667
Likes: 0
Received 2 Likes
on
2 Posts
Car: 86 Iroc Z
Engine: 406
Transmission: 350 Turbo
Axle/Gears: 373
if you decide on Spintech, I have a pair of them in the for sale section. They are brand new.
140 plus shipping and their yours
140 plus shipping and their yours
#6
Supreme Member
iTrader: (1)
Join Date: Mar 2001
Location: Chesterfield, Indiana
Posts: 4,226
Likes: 0
Received 6 Likes
on
5 Posts
Car: 1991 Z28 Camaro
Engine: 5.7
Transmission: Jasper 700R4 Stage II
Axle/Gears: 3.23 For Now
Never heard any spintech exhuast systems before....I too have Flowmaster...I'm happy with it. You can see my exhuast set-up in my signature. One thing I do know is that with a 5.7....the flowmaster exhaust is much louder then on a 5.0. Don't get me wrong, they sound great on 5.0's....just not as loud as on a 5.7. Good luck with your decision
#7
Everyone tells me my exhaust sounds awesome or bad *** and I have a Flowmaster 80 series with no cat and an L69, and it will have headers soon. I'm sure the spintech is a great product to though.
Trending Topics
#8
Supreme Member
Join Date: Jan 2003
Location: ny-lindy
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Iroc z hardtop
Engine: peanut LB9
Transmission: slopomatic TH700R4
i wanna kinda get a spintech myself. theres a guy at dpa who hhas one one his 92z28 305tpi/5spd. hes got a flowmaster catback wiothh a spintech muffler in place. it sounds so sweet. he says it they both rumble the same at an idle at part trottle the spintec h is a little quiter but under full trottle it sounds so much better than the flowmaster.
#9
Member
Join Date: Aug 2001
Location: Hillsborough, NJ, USA
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1996 Jeep Cherokee
Engine: 4.0
Transmission: 5 speed
There is a kid in my town that has a 2000 SS with a Spintech exhaust. It sounds pretty good, but he also has some work done to the car (heads, cam, etc.). They both sound good, but they also both sound different. The Flowmaster sounds a little more like a classic muscle car thats packing a hot motor. The spintech sounds kinda strange but at the same time really good. Its really up to what you want your car to sound like.
#10
Supreme Member
Join Date: Mar 2002
Location: Lower Salford, PA
Posts: 1,654
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro Z-28
Engine: 6.3L Victor EFI
Transmission: Tremec TKO 600
Axle/Gears: Moser 9"/4.11 Trac-Lok
I have dual 12" Spintech Pro Streets mufflers on mine & it is LOUD. Everybody loves it. It sounds like a big block with a lot of cam. Of course if you drive it every day it would be annoying. Spintech makes many different types, most would be quieter than the Pro Streets are.
#14
Senior Member
Join Date: Apr 2002
Location: Massachusetts
Posts: 664
Likes: 0
Received 0 Likes
on
0 Posts
Spintech is a single 4"in and dual 3" out. The flowmaster is 3"in and single 3" out with the mufflex systems. Im putting my 4" mufflex system in tomorrow and chose the spintech.
#15
Spintech is a single 4"in and dual 3" out. The flowmaster is 3"in and single 3" out with the mufflex systems. Im putting my 4" mufflex system in tomorrow and chose the spintech.
Hey, good choice. What is the part number on your spintech? The spintechs are a bit more expensive than flowmaster just because you get what you pay for, as in quality. But if you like the flowmaster sound, then go with that. You'll be happy with the unique clean sound of the spintech. 4" in, jees that's huge! I've got the 3" in, dual 2.5" outlets. -89IRO
Hey, good choice. What is the part number on your spintech? The spintechs are a bit more expensive than flowmaster just because you get what you pay for, as in quality. But if you like the flowmaster sound, then go with that. You'll be happy with the unique clean sound of the spintech. 4" in, jees that's huge! I've got the 3" in, dual 2.5" outlets. -89IRO
#16
Ive got 80 series muffler, sounds bad *** 2 me kinda quiet but everybody tells me its loud as hell so guess I cant complain, but i got a gutted cat and edelbrock headers as well 3" all the way back dual 3" out.
#17
Senior Member
Join Date: Apr 2002
Location: Massachusetts
Posts: 664
Likes: 0
Received 0 Likes
on
0 Posts
Hey, good choice. What is the part number on your spintech? The spintechs are a bit more expensive than flowmaster just because you get what you pay for, as in quality. But if you like the flowmaster sound, then go with that. You'll be happy with the unique clean sound of the spintech. 4" in, jees that's huge! I've got the 3" in, dual 2.5" outlets. -89IRO
I do not know the model number because it's coming with the whole mufflex system. I do know it' sa race serie muffler. Yup I need the 4" exhaust to push out all that HP. I have a hacked ypipe that is 3"to 2" then back to 3". People told me that I can gain up to about 90hp with the proper exhaust. Pretty dissapointed with the 13.1s Et and the mods in my new motor.
#18
Mark shields.... that hooker sound AWESOME... is that the whole cat-back... or just the muffler that makes it sound like that ?..
DOES ANYONE HAVE A SOUNDCLIP OF THE SPINTECH ?... I've heard A LOT of hype.. but I've never heard the actual muffler of a small-block chevy
DOES ANYONE HAVE A SOUNDCLIP OF THE SPINTECH ?... I've heard A LOT of hype.. but I've never heard the actual muffler of a small-block chevy
#19
Yes, Evil has a sound clip, do a search, he's all over the place. Also, on their website, they've got sound clips, but not on a 3rd gen. I know there isn't as much info out there about them since everyone hops on the flowmaster wagon and they are just determined they are the best. Also, they do tons of advertising. Ask almost any racer and they will tell you they know of spintech.
www.spintechmufflers.com (sound clips)
www.spintechmufflers.com (sound clips)
#20
Supreme Member
iTrader: (1)
Join Date: Apr 2000
Location: Northern CA.
Posts: 5,321
Likes: 0
Received 4 Likes
on
4 Posts
Car: '82 Z28
Engine: 350
Transmission: TH400 4,000 stall
Axle/Gears: Currie 9", 4.56 gears
I voted spintech of course By the way, I took off all the soundclips and movies earlier in the month from my webspace so you'll probably run into dead links. I'll get a new clip up soon since my car just came back from the transmission shop, yet again.
#24
Supreme Member
Join Date: Jan 2003
Location: ny-lindy
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Iroc z hardtop
Engine: peanut LB9
Transmission: slopomatic TH700R4
all my freinds say get a flowmaster, but i think the sound like poop. (for lack of other words), but i'm gong SPINTECH all the way 115.37%.
#26
Senior Member
Join Date: Mar 2001
Location: Silverhill,Al
Posts: 838
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Camaro RS
Engine: 305 TBI
Transmission: T-5
I like my Spintech, it's a crossflow with a 3" IN and dual 2 1/2" OUT's, it's not as loud as a Flow at idle but has a very different type sound once you get into it a little, everyone asks what it is because it has a unique sound to it, so if you like being different it's a great muffler, plus it flows better than any Flowmaster.
#27
Administrator
iTrader: (1)
89IRO, don't you think you are going a little too far with your constant remarks about Flowmaster?? I think it's too much. Is there other nice sounding exhausts?? Sure. I've heard many and the best have been Flowmasters while there are also many other people here that like them besides me. Please be grown up and stop the bashing. I and plenty of others don't like other exhausts but we don't go around saying ridiculous things about them every single chance we get. Joking as we do with the Hooka dude is OK, but even he will tell you that he has heard nice Flowmasters and when he says something we know its in fun and opinion, not all pissed off sounding BS directed at the most popular widely used exhaust no less.
Last edited by IROCZTWENTYGR8; 05-04-2003 at 02:27 AM.
#28
Moderator
Originally posted by IROCZTWENTYGR8
89IRO, don't you think you are going a little too far with your constant remarks about Flowmaster?? I think it's too much. Is there other nice sounding exhausts?? Sure. I've heard many and the best have been Flowmasters while there are also many other people here that like them besides me. Please be grown up and stop the bashing. I and plenty of others don't like other exhausts but we don't go around saying ridiculous things about them every single chance we get. Joking as we do with the Hooka dude is OK, but even he will tell you that he has heard nice Flowmasters and when he says something we know its in fun and opinion, not all pissed off sounding BS directed at the most popular widely used exhaust no less.
89IRO, don't you think you are going a little too far with your constant remarks about Flowmaster?? I think it's too much. Is there other nice sounding exhausts?? Sure. I've heard many and the best have been Flowmasters while there are also many other people here that like them besides me. Please be grown up and stop the bashing. I and plenty of others don't like other exhausts but we don't go around saying ridiculous things about them every single chance we get. Joking as we do with the Hooka dude is OK, but even he will tell you that he has heard nice Flowmasters and when he says something we know its in fun and opinion, not all pissed off sounding BS directed at the most popular widely used exhaust no less.
*Ding Ding!
Hey, they outflow flowmasters too! Didn't you see the dyno sheets posted!
*Psst, I got your mail today, I called and no one answered. Will try tomorrow.
#30
NO. First of all, I was not trying to be all serious like you're implying I am, it's kind of hard to hear the tone of my voice through my typing. "Bashing" of flowmaster? Sorry if I offended you by calling it a "flowcrapper" deal with it. And no, I have never heared a nice sounding flowmaster, they all have a distinctive sound that I don't like (OPINION)!!. And I think there are other muffler companies other than Spintech that I think are great too, like magnaflow and dynomax. A lot of people say they like hooker, but I can't say I do or don't because I've never heared one. You shouldn't take this all personally. :lala:
Last edited by 89IRO; 05-04-2003 at 08:48 AM.
#31
Moderator
Originally posted by 89IRO
NO. First of all, I was not trying to be all serious like you're implying I am, it's kind of hard to hear the tone of my voice through my typing. "Bashing" of flowmaster? Sorry if I offended you by calling it a "flowcrapper" deal with it. And no, I have never heared a nice sounding flowmaster, they all have a distinctive sound that I don't like (OPINION)!!. And I think there are other muffler companies other than Spintech that I think are great too, like magnaflow and dynomax. A lot of people say they like hooker, but I can't say I do or don't because I've never heared one. You shouldn't take this all personally. :lala:
NO. First of all, I was not trying to be all serious like you're implying I am, it's kind of hard to hear the tone of my voice through my typing. "Bashing" of flowmaster? Sorry if I offended you by calling it a "flowcrapper" deal with it. And no, I have never heared a nice sounding flowmaster, they all have a distinctive sound that I don't like (OPINION)!!. And I think there are other muffler companies other than Spintech that I think are great too, like magnaflow and dynomax. A lot of people say they like hooker, but I can't say I do or don't because I've never heared one. You shouldn't take this all personally. :lala:
I don't think he has a problem with you posting your opinion. I think he meant your bashing of flowmaster in every post you made was kind of excessive and not needed.
#32
Supreme Member
Join Date: Jan 2003
Location: ny-lindy
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Iroc z hardtop
Engine: peanut LB9
Transmission: slopomatic TH700R4
does anybody have a soundclip of a spintech??? on a 305tpi. cause i'm just curious on how it would sound. i've heard them ona dual 3" setup on a 383Lt1 motor. but i wanna hear one one a 305tpi.
also, where can i get 3" tailpipes?
also, where can i get 3" tailpipes?
#35
Senior Member
Join Date: Apr 2002
Location: Massachusetts
Posts: 664
Likes: 0
Received 0 Likes
on
0 Posts
I had a flowmaster with my old exhaust setup and loved it... BUT I just put in my 4" mufflex with the spintech and the spintech sounds a lot better I think. I heard that the spintech may out perform the flowmaster.
The bottom line is what kind of HP do you guys have in your car. I can see a big difference with you guys pushing 400+ HP, but for those stock applications or mildly modified (<400 flywheel) it really wont make a big difference. If you want to gain some HP get some headers - mufflers arent the way to gain HP. Pick the one that sounds better to you.
I was a flowmaster man in all the cars Ive had and to be honest with you I almost bought the flowmaster for the mufflex system but they didnt have 4" inlet and dual outlets thats why I ended up with the spintech 4" inlet/ dual 3" outlets. I wont go back to flows...
The bottom line is what kind of HP do you guys have in your car. I can see a big difference with you guys pushing 400+ HP, but for those stock applications or mildly modified (<400 flywheel) it really wont make a big difference. If you want to gain some HP get some headers - mufflers arent the way to gain HP. Pick the one that sounds better to you.
I was a flowmaster man in all the cars Ive had and to be honest with you I almost bought the flowmaster for the mufflex system but they didnt have 4" inlet and dual outlets thats why I ended up with the spintech 4" inlet/ dual 3" outlets. I wont go back to flows...
#36
Moderator
Originally posted by 89IRO
O.K., you win, I lose, flowmaster still sucks though..J/K!!! I hope I didn't bash flowcrapper again this time.
O.K., you win, I lose, flowmaster still sucks though..J/K!!! I hope I didn't bash flowcrapper again this time.
Uhhhhh, ok
Originally posted by gtabadboy
The bottom line is what kind of HP do you guys have in your car. I can see a big difference with you guys pushing 400+ HP, but for those stock applications or mildly modified (<400 flywheel) it really wont make a big difference. If you want to gain some HP get some headers - mufflers arent the way to gain HP. Pick the one that sounds better to you.
The bottom line is what kind of HP do you guys have in your car. I can see a big difference with you guys pushing 400+ HP, but for those stock applications or mildly modified (<400 flywheel) it really wont make a big difference. If you want to gain some HP get some headers - mufflers arent the way to gain HP. Pick the one that sounds better to you.
#38
The bottom line is what kind of HP do you guys have in your car. I can see a big difference with you guys pushing 400+ HP, but for those stock applications or mildly modified (<400 flywheel) it really wont make a big difference. If you want to gain some HP get some headers - mufflers arent the way to gain HP. Pick the one that sounds better to you.
LOL! Some of you guys are fun to screw with. I agree too. Even though A LOT of people say most anything outflows flow"master", you probably won't feel it unless you've got 350-400 HP at least. Whatever sounds good to you is what you should choose. Have a nice day! -89IRO
LOL! Some of you guys are fun to screw with. I agree too. Even though A LOT of people say most anything outflows flow"master", you probably won't feel it unless you've got 350-400 HP at least. Whatever sounds good to you is what you should choose. Have a nice day! -89IRO
Last edited by 89IRO; 05-04-2003 at 08:59 PM.
#40
Supreme Member
iTrader: (1)
Join Date: Apr 2000
Location: Northern CA.
Posts: 5,321
Likes: 0
Received 4 Likes
on
4 Posts
Car: '82 Z28
Engine: 350
Transmission: TH400 4,000 stall
Axle/Gears: Currie 9", 4.56 gears
Ok, here's a video that's a few months old now. Found out later that I had a big vacuum leak. Was wondering why the car felt so slow lol. Here's the zip file Details of the car are in my sig, also there is a little blurb in the video.
I'm trying to get a new video done but it's been raining. Kinda hard to launch a car and just have it spin all the way to 3rd gear lol.
I'm trying to get a new video done but it's been raining. Kinda hard to launch a car and just have it spin all the way to 3rd gear lol.
#41
Supreme Member
Join Date: May 2002
Location: Dash PT, WA
Posts: 1,466
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28
Engine: LB9
Transmission: WC T5
If I didn't get my flowmaster for free I prob wouldnt have bought it, I prob. would have gone with hooker or something similar. But I couldnt pass up the flow w/ the 2 huge 30$ 3" tips.
#43
Supreme Member
Join Date: Apr 2003
Location: Oregon
Posts: 1,075
Likes: 0
Received 0 Likes
on
0 Posts
Car: GM & Jaguar
Engine: Various
Transmission: Various
Axle/Gears: Various
Well, I think more people have Flowmaster therefore you'll find more people saying "Flowmasta da best man!". I'm pleased with Flowmasters on my Camaro (80 Series), and on my Nova (40 Series X2), but it's basically "trendy" nowadays, and that's no fun
BTW; Even though I have Flowmasters, I still laughed at "Flowcrappers", come on now, it's funny!
BTW; Even though I have Flowmasters, I still laughed at "Flowcrappers", come on now, it's funny!
#44
Senior Member
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
I love my FLOWMASTERS . They have a real nice sound to them atleast with my engine they do
#45
Supreme Member
Join Date: Jan 2003
Location: ny-lindy
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Iroc z hardtop
Engine: peanut LB9
Transmission: slopomatic TH700R4
i like them too, but i just kida wana be differnet sso thats wy i'm getting a spintech mufler, i like to be differnet. plus i like the idea of a somewhat boxy muffler. especially when looking from the rear, i will get more questions and a unquine sound too. everybody sees a flowmaster and ca hear it tooo.
#47
i like them too, but i just kida wana be differnet sso thats wy i'm getting a spintech mufler, i like to be differnet. plus i like the idea of a somewhat boxy muffler. especially when looking from the rear, i will get more questions and a unquine sound too. everybody sees a flowmaster and ca hear it tooo.
Which model are you going to get? I have the 343SC; that's what you want if you want it in the stock crossflow position. Tell us what you think once you get it installed! Later. -89IRO
Which model are you going to get? I have the 343SC; that's what you want if you want it in the stock crossflow position. Tell us what you think once you get it installed! Later. -89IRO
#48
Supreme Member
Join Date: Jan 2003
Location: ny-lindy
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Iroc z hardtop
Engine: peanut LB9
Transmission: slopomatic TH700R4
i'm getting the cross flow muffler, 3" in and dual 3" out, alotough i can't find anybody to make me some 3" tips and i dunno wherei can buy them. and i should have it installed by the end of july. the begining of july end of june. i would have it sooner but i have to pay off my rear end first, and i'm going to school working part time so it tkes time. if u get what i'm saying
23 credits= the equlivant of about anywhere from 5-15 hours day if not more plus i only work 25 hours a week.
23 credits= the equlivant of about anywhere from 5-15 hours day if not more plus i only work 25 hours a week.
Thread
Thread Starter
Forum
Replies
Last Post
[Sold] Flowmaster exhaust system
Night rider327
Engine/Drivetrain/Suspension Parts for Sale
4
10-09-2015 09:25 AM