what dist gear?
04-20-2010 | 04:56 PM
#1
Thread Starter
Senior Member
iTrader: (5)
Joined: Sep 2007
Posts: 640
Likes: 3
From: Northern California
Car: 1985 California Iroc
Engine: HSR ZZ4 0411 swapped
Transmission: 4L60E
Axle/Gears: 3.23 posi
what dist gear?
im going to install a stock lt-1 roller cam in my engine, can i use my hei's distributor gear or not? my distributor is just a stock vac advance unit. thanks -art
04-20-2010 | 05:08 PM
#2
Moderator
iTrader: (14)
Joined: Mar 2000
Posts: 43,169
Likes: 36
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
How old is the distributor?
Most likely the gear will be okay, unless it's really early HEI.
Most likely the gear will be okay, unless it's really early HEI.
04-21-2010 | 07:52 AM
#4
Moderator
iTrader: (14)
Joined: Mar 2000
Posts: 43,169
Likes: 36
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Where did you get it?
Most likely it'll be okay, but if in doubt, go to the dealer and buy a melonized gear. P/N 10456413 http://sdparts.com/details/gm-perfor...parts/10456413
Most likely it'll be okay, but if in doubt, go to the dealer and buy a melonized gear. P/N 10456413 http://sdparts.com/details/gm-perfor...parts/10456413
Thread
Thread Starter
Forum
Replies
Last Post
UltRoadWarrior9
Transmissions and Drivetrain
3
09-02-2015 08:24 PM
