hsr base needed 1206 port
#1
Member
Thread Starter
iTrader: (2)
Join Date: Jun 2006
Location: Rocky Face, Ga
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Formula
Engine: 355ci HSR SBC
Transmission: 700r4
Axle/Gears: 3.27
hsr base needed 1206 port
Looking for a newer style hsr.
Either already matched to a felpro 1206 or one that has enough meat to port.
Just the manifold. I don't need any of the other parts. The mating surfaces need to be flawless. No gouges or cuts at all. I don't care if its ported or not, just gasket matched to a 1206. (as I have pro-filer heads that are 1206 matched. ) The hsr I have is an old style, and I really want it to match up.
Hell, I'd even take a newer style that I can port, just no rough mating surfaces.
Either already matched to a felpro 1206 or one that has enough meat to port.
Just the manifold. I don't need any of the other parts. The mating surfaces need to be flawless. No gouges or cuts at all. I don't care if its ported or not, just gasket matched to a 1206. (as I have pro-filer heads that are 1206 matched. ) The hsr I have is an old style, and I really want it to match up.
Hell, I'd even take a newer style that I can port, just no rough mating surfaces.
Last edited by truckerz; 01-14-2016 at 08:10 PM. Reason: more info.
#2
Re: hsr base needed 1206 port
I've got one
Ported to 1206
Looking for a newer style hsr base.
Either already matched to a felpro 1206 or one that has enough meat to port.
I do not need any other parts, just the base. I'd consider buying both upper and lower plenum, but not rails for or Any other part, as I already have a complete setup. I just have 1206 heads.
Standard sbc pattern.
Either already matched to a felpro 1206 or one that has enough meat to port.
I do not need any other parts, just the base. I'd consider buying both upper and lower plenum, but not rails for or Any other part, as I already have a complete setup. I just have 1206 heads.
Standard sbc pattern.
Ported to 1206
#4
Member
iTrader: (2)
Join Date: Jan 2006
Location: Ettrick WI
Posts: 103
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Z,92 RS,95 SS,00 WS6, 04 XUV
Engine: 383z,350RS, LT1, LS1 ,vortec 4.2
Transmission: 700R4, 700R4,4L60E,4L60E, Auto,
Re: hsr base needed 1206 port
I'd be interested in the rail kit if it helps, i need an extra one
Thread
Thread Starter
Forum
Replies
Last Post