Need gm part#10111773 camshaft!!!
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Z28 CMC car
Engine: building 305 TPI H.O.
Transmission: T5
Axle/Gears: 3.42
Need gm part#10111773 camshaft!!!
I need this specific cam shaft for the road race series I'm in. Please PM me with details
#2
Re: Need gm part#10111773 camshaft!!!
I have one of these camshafts (new). I also know where to get another new one. These were used in the Highway Patrol cars here in Oklahoma before they changed models of cars.
Do you have the specs (lift, duration, and lobe separation angle) for this camshaft? I have been unable to find this out because they have been discontinued.
Do you have the specs (lift, duration, and lobe separation angle) for this camshaft? I have been unable to find this out because they have been discontinued.
#3
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Z28 CMC car
Engine: building 305 TPI H.O.
Transmission: T5
Axle/Gears: 3.42
Re: Need gm part#10111773 camshaft!!!
Very cool. Can you sell one to me? Specs are below....kinda weak but It's the best one out of the cams that came in that Generation.
Lift Duration
Redline intake exhaust intake exhaust lobe seperation
5500 rpm .413 .428 202 207 114.5 (116/-116)
Lift Duration
Redline intake exhaust intake exhaust lobe seperation
5500 rpm .413 .428 202 207 114.5 (116/-116)
#4
Re: Need gm part#10111773 camshaft!!!
I'm pretty sure I can get you the other one I know of. I just don't know the price. What do they normally go for? I might even sell mine. I was looking for more lift than that.
Where are you located?
Where are you located?
#6
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Z28 CMC car
Engine: building 305 TPI H.O.
Transmission: T5
Axle/Gears: 3.42
Re: Need gm part#10111773 camshaft!!!
The best I've seen so far for the "stock sticks" is $75 . have a guy that will grind me one with those specs but working on a budget. I am in the Houston area.
----------
It IS the stock camshaft out of a 92 LB9 motor...it's what I need. It may sound stupid but I have to stay within certain criteria for the racing series that I'm running.
----------
Last edited by Rsmith350; 04-01-2008 at 10:07 PM. Reason: Automerged Doublepost
#7
Re: Need gm part#10111773 camshaft!!!
I am checking on the price. Will get back later. I'm thinking it is in the $150 to $175 range, though. They are new and still in the round box sent from Dealer.
Trending Topics
#8
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Z28 CMC car
Engine: building 305 TPI H.O.
Transmission: T5
Axle/Gears: 3.42
Re: Need gm part#10111773 camshaft!!!
OH! I should have read the post better. Thought it was a used stick. I'll give you $150 for it.
#9
Re: Need gm part#10111773 camshaft!!!
The guy that has this cam is
Eley's Service Center
Hyway 33 West
Watonga, OK
(580) 623-9925
He has 1 left and will sell it. Just contact him for more info and the deal.
Eley's Service Center
Hyway 33 West
Watonga, OK
(580) 623-9925
He has 1 left and will sell it. Just contact him for more info and the deal.
Thread
Thread Starter
Forum
Replies
Last Post
88SS6SPEED
Engine/Drivetrain/Suspension Parts for Sale
7
11-11-2015 07:05 AM
GTAman
Engine/Drivetrain/Suspension Parts for Sale
4
09-26-2015 02:01 PM