When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I need to get rid of this stuff or it's going to the scrap yard. I would rather see someone that needs it get it.
All engine parts are from a 87 TA TPI motor. One piece rear main with 76000 miles. I've had them since 2003.
87 350 heads with rockers and push rods. FREE-you only pay shipping
87 350 crank. Journals all mike standard just needs to be cleaned up Free -you only pay shipping
8 piston and rod assy One has a broken skirt, FREE- -you only pay shipping
87 stock roller cam. Free -you only pay shipping
Gray Powder coated manifold center holes made to fit all years. casting # 10086015. Ported to match gaskets on runner side. $20. plus shipping
stock runners that I started to polish and never finished. No dents $15.-plus shipping
Polished upper plenum with stock throttle body. $50 plus shipping.
Polished fuel rails modified for 6an rear entry with adjustable regulator Regulator needs diaphragm $75 + shipping
87 v8 motor mounts-may fit other years. $15 + ship
Front drive off a 87 TA 350 TPI. This is a combo v belt and serpentine assembly. Media blasted and primed. (after pic taken}
Good working AIR pump. $50 + shipping.
believe all brackets and bolts are there. $40+ship
Other odds and ends. Let me know what you need.
16 push rods and rocker arms go with heads
Manifold, runners, plenum, throttle body, fuel rails, regulator, motor mounts, front drive assy., AIR pump, are all sold. thank you all. Heads, crank, and cam are still free for the taking.
Last edited by smoke29; 03-15-2023 at 08:27 AM.
Reason: Some Sold parts
Hi Coon88. $55. plus shipping for the front drive aasy stuff and motor mounts. $40. + $15. If interested send me your zip and I'll try and figure out shipping.
Awesome! Those mounts and front drive should work for v6 to SBC right?
And 43019
If you're asking if this will work on a V6 I don't know. You will have to find that out. Maybe someone on the thread can help. This all came off a 87 TA 350 V8
JDL71. You can get the lower intake but as you can see coon88 has spoken for the front drive assy. If deal with him does not go through than you can have it. Will let you know. Sorry but he asked first.
JDL71. You can get the lower intake but as you can see coon88 has spoken for the front drive assy. If deal with him does not go through than you can have it. Will let you know. Sorry but he asked first.
I didn’t read his entire post my first time through. No problem.
02-15-2023 | 12:48 PM
