dennisbernal91z

iTrader: (2)

I bought this radiator for my 390 F1 Procharged motor. It has a 16-AN inlet.

BeCool PN: 35030. Cost new $280 on Summit Racing.
Link: https://www.summitracing.com/parts/b...kaAl9wEALw_wcB

I had these on the car for 50 miles total. I got the car back from the shop and that was it. Got married, bought a house.... long story short the build is going in a different direction. Parts are basically new. See images showing dims and condition. A few fins bent a bit on the motor facing side. Nothing that would hurt performance.

Thanks. Fingers crossed on a local sale.

dennisbernal91z

iTrader: (2)

Forgot to mention the radiator comes with a BeCool polished radiator cap as well. Included in the cost. Has about 50 miles on it, same as radiator.

dennisbernal91z

iTrader: (2)

Here is the hose I made for the radiator. Also selling it for $50.

dennisbernal91z

iTrader: (2)

Dropping price to $325, with the fans. $25 for the hose.

dennisbernal91z

iTrader: (2)

Still have this for sale. bump....

TylerSteez

iTrader: (3)

$300 total for fans and hose?

just measured my car, how did it fit in a thirdgen?

dennisbernal91z

iTrader: (2)

Fit well. I can take precise dimensions if you want. What do you want to know?

I could do $300.

TylerSteez

iTrader: (3)

dennisbernal91z

iTrader: (2)

I have searched a lot and can't seem to find any.

What I can do is drop it into my gutted car and take a pic from inside the engine bay.

I had it under a 3" Cervini cowl hood. Basically stock clearance up by the radiator.

TylerSteez

iTrader: (3)

looking forward to the pic

dennisbernal91z

iTrader: (2)

Here are some images.

dennisbernal91z

iTrader: (2)

dennisbernal91z

iTrader: (2)

I know it looks sort of tall, but my Cervini hood cleared it just fine.

No idea what a stock hood would do, but the cowl bump of my hood is not located over the filler cap, so I would guess it is near stock in that area.

If more images are needed, please let me know.

dennisbernal91z

iTrader: (2)

bump

dennisbernal91z

iTrader: (2)

$200 bucks takes the radiator and the 2 fans. Just looking to make space in the basement.
Radiator alone was over $250. Fans have only been run during tuning the old motor.

tlkcurban@comca

Any idea how much hp this will cool??? Thanks Kevin

dennisbernal91z

iTrader: (2)

Back when i was piecing this kit togeather I called BeCool and they told me it should be good for around 650hp.

dennisbernal91z

iTrader: (2)

First $50 takes the radiator. Looking to clean up the basement.
Basically new. If I still have this thing in a couple months, gonna toss it.

BOOBYE

iTrader: (3)

Will take it. Please send me PayPal information.

Thanks

dennisbernal91z

iTrader: (2)

Hey BOOBYE, I just scanned over the post and realized that I didn't mention that the fans were sold already.
My mistake. Still interested?

THIS IS JUST FOR THE RADIATOR. I have the custom -16 threaded top hose I think too if you want that.
I am goin' LS and already have a new unit. Thanks and sorry for the confusion. Long work day.

dennisbernal91z

iTrader: (2)

Hose is now included. No need for it.

dennisbernal91z

iTrader: (2)

Still have radiator. Free to anyone who wants it. Just want it gone

BOOBYE

iTrader: (3)

Will take it.
PM details
Thanks you.

dennisbernal91z

iTrader: (2)

Hey guys happy to see that saying it is free gets it out of my basement, but I am building a resto mod 91 Z28 and really don't want to spend the time to box something up and ship it if it isn't making me any money.
I would rather just recycle it locally.

If you want it, then PM me a price that makes it worth the MASSIVE PAIN IN THE A$$ to box stuff up and ship. 100% not doing that for free. My time is worth something.

To anyone else that is local, it is yours.

dennisbernal91z

iTrader: (2)

Some things to make 100% clear, this is not a drop in radiator for a third gen. It is well built and is a general use circle track radiator by BeCool. You will have to do some fab work to make it fit.

Finally, there is just about a zero chance I will find a box appropriately sized for this thing.

Selling stuff online, finding boxes is the most annoying part BY FAR.

I can hack some stuff up and make a makeshift box, but when I did that selling a Spohn TQ arm it took 2hrs! And shipping was still $120! Luckily the buyer was still interested and bought it and i recovered about $100 from the original $400 cost.

All that being said, I am not looking to make any money on this, but I am also not going to spend lots of time making a box, getting quotes, driving it to fedex just to make like $5. That won't cover the gas to get to fedex.

I may just list it for sale on CL and wait for a local buyer. I really hate shipping things. My only car is a C7 so driving old car parts around is annoying when trying to keep it nice.

I will post dims of the unit and weight. Add maybe 4" in each direction and get your own estimates from 02893 to you. You will see that shipping is no joke.

dennisbernal91z

iTrader: (2)

Selling this rad for $60 on CL. If it doesn't sell there I will just toss it. Getting sick of looking at it in my basement.

topduarte

iTrader: (8)

Is this the radiator in first pic for sale.

dennisbernal91z

iTrader: (2)

Yes. That's what is for sale.

topduarte

iTrader: (8)

How much shipped to zip code 78660?
Feel free to text me at 5129475537 or email me at topduarte@yahoo.com

Thanks

Manny

dennisbernal91z

iTrader: (2)

Not gonna bother calculating shipping.
Punch the #s into UPS.com, guessing it weighs at least 10lbs.

Chances are I am not gonna bother shipping since it is something I really just feel like tossing and finding a box that fits it efficiently will take WAY WAY more time than I care to spend for $60.

If you think shipping (ballpark) seems worth it and can offer me enough that makes it worth my time, then we can chat. If not, it is getting recycled.
Tired of seeing it in my basement.