350 Engine for sale set up for tbi
05-02-2017 | 04:45 PM
#1
Thread Starter
Junior Member
Joined: Mar 2016
Posts: 16
Likes: 0
From: Baltimore CO. Maryland
Car: 1992 Camaro RS
Engine: 350
Transmission: 700R4
Axle/Gears: Posi. 3.54
350 Engine for sale set up for tbi
I have a chevrolet 350 for sale. It was built by a private hand. (Not a shop) the man is an ASE certified tech.
GM fastburn heads
3rd generation vortec truck block
Intake is a for a gm truck tbi.
Comes with the throttle body. It's one from an older tow truck, if I'm not mistaken they had a 454 with 45 lb injectors.
That was ported out a bit larger with the same injectors.
Comes with ALL ACCESSORIES , serp belt. Spark plugs, wires distrubitor, cap and rotor, pulleys included.
On this specific engine we added a nitrous setup on it I have the tank, steel braided line,controller, and throttle body spacer for it.
This system is a "smart system" where is not all at once if you don't have the pedal down, it's a little more driver friendly like that in my opinion.
Engine before nitrous is rated at 375 and the nitrous is set up for a 100hp shot. Any questions concerns or comments please let me know. This engine isn't even fully broken in, with less than 1000 miles on her. There is nothing wrong with her. My plans of what I wanted to do changed, had to sell the car so I pulled the engine prior. I spent a lot of money on her. I know I won't get everything out of it. So I'm asking 2000$ o.b.o for the entire set up. Serious inquiries only. I'm located in Halethrope Maryland. please message me if you have any questions concerns or comments at all. Thank you for your time!
GM fastburn heads
3rd generation vortec truck block
Intake is a for a gm truck tbi.
Comes with the throttle body. It's one from an older tow truck, if I'm not mistaken they had a 454 with 45 lb injectors.
That was ported out a bit larger with the same injectors.
Comes with ALL ACCESSORIES , serp belt. Spark plugs, wires distrubitor, cap and rotor, pulleys included.
On this specific engine we added a nitrous setup on it I have the tank, steel braided line,controller, and throttle body spacer for it.
This system is a "smart system" where is not all at once if you don't have the pedal down, it's a little more driver friendly like that in my opinion.
Engine before nitrous is rated at 375 and the nitrous is set up for a 100hp shot. Any questions concerns or comments please let me know. This engine isn't even fully broken in, with less than 1000 miles on her. There is nothing wrong with her. My plans of what I wanted to do changed, had to sell the car so I pulled the engine prior. I spent a lot of money on her. I know I won't get everything out of it. So I'm asking 2000$ o.b.o for the entire set up. Serious inquiries only. I'm located in Halethrope Maryland. please message me if you have any questions concerns or comments at all. Thank you for your time!