[MD] New Project coming sale
#1
New Project coming sale
Im working on a new project (LS motor) so everything that was going in the previous project must go.... make room and make money. If I mention it in text or not it can go if its in the picture... I would like to sell things together so Ill keep track of individual request but honestly if I can sell as a package it will have priority
The project 383 SBC AFR 190 heads Edelbrock lower TPI Super Ram upper DIX supercharger
383 Motor with Edelbrock lower intake billet timing cover to accept bbc balancer(have balancer) AFR 190 heads attached was suppose to be a 4 bolt main but is a 2 bolt.. the reason the project stalled motor is brand new never ran - 1500 (pending Sale)
700R4 transmission Stage 2 built but used - 500 (on hold till Nov 17 pending sale)
Super Ram intake jet coated lower polished lid - 700
jet coated factory brackets 100
billet timing chain 50
billet time chain cover - 50 -
billet valve covers& billet breathers 70 (May go with motor)
Brand new roller rockers 1.6(brand new in box) - 200
factory fuel rail and lines - 70
factory fuel rail converted to take AN lines - (sold)
Accel fuel rail kit - 70
1 3/4 headers jet coated -500
Jet coated motor mounts poly bushings - 100
1000 lingenfelter throttle body - 250
Edelbrock water pump - 125
Multiple SBc alternators all rewound for higher amps(ran big amps for years) 50 each chrome and normal
D1x procharger kit Supercharger D1B rebuilt by procharger upgraded to D1X -(sold)
Universal plug wire - 50 -
All prices are OBO don't insult me and I will reply shipping not included
The project 383 SBC AFR 190 heads Edelbrock lower TPI Super Ram upper DIX supercharger
383 Motor with Edelbrock lower intake billet timing cover to accept bbc balancer(have balancer) AFR 190 heads attached was suppose to be a 4 bolt main but is a 2 bolt.. the reason the project stalled motor is brand new never ran - 1500 (pending Sale)
700R4 transmission Stage 2 built but used - 500 (on hold till Nov 17 pending sale)
Super Ram intake jet coated lower polished lid - 700
jet coated factory brackets 100
billet timing chain 50
billet time chain cover - 50 -
billet valve covers& billet breathers 70 (May go with motor)
Brand new roller rockers 1.6(brand new in box) - 200
factory fuel rail and lines - 70
factory fuel rail converted to take AN lines - (sold)
Accel fuel rail kit - 70
1 3/4 headers jet coated -500
Jet coated motor mounts poly bushings - 100
1000 lingenfelter throttle body - 250
Edelbrock water pump - 125
Multiple SBc alternators all rewound for higher amps(ran big amps for years) 50 each chrome and normal
D1x procharger kit Supercharger D1B rebuilt by procharger upgraded to D1X -(sold)
Universal plug wire - 50 -
All prices are OBO don't insult me and I will reply shipping not included
Last edited by a383z; 11-14-2014 at 03:36 PM.
Trending Topics
#8
Junior Member
iTrader: (3)
Join Date: Apr 2013
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Camaro
Engine: 355 tpi
Transmission: 700r4
Axle/Gears: 3.73
Re: New Project coming sale
I failed to read that part... was the OP edited? Im interested in the rockers, saw 105 as price to begin with. Do 125?
#9
Re: New Project coming sale
Ive been steadily adding and updating the ad.. but if you give it a min... maybe Ill go down in price... i thought they were competitively priced since I couldnt fine them cheaper on the internet... (they are brand new in box) Do you think half off regular price is still to much. I am trying to be fair.
#10
Junior Member
iTrader: (3)
Join Date: Apr 2013
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Camaro
Engine: 355 tpi
Transmission: 700r4
Axle/Gears: 3.73
Re: New Project coming sale
I think it is a completely fair price for a great product. But as I sit right now I do not "need" them, I have some other 1.6's on hand. But I thought I would throw in an offer, didnt want to spend any excess money currently but if I can take em for just a bit less I couldnt refuse. Let me know what you think, not trying to clog up the post
#11
Member
iTrader: (5)
Join Date: Aug 2006
Location: Stafford, Connecticut
Posts: 311
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Iroc
Engine: modified 350
Transmission: high performance built 700R4
Axle/Gears: Strange S60 3:73
Re: New Project coming sale
Would you be willing to sell just the Accel plenum and runners ?If so how much?Thanks
#12
Re: New Project coming sale
Advertised the plenum for 700 based on other one for sale on forum is 600 for a regular one... Mine has a polished lid and the box was jet coated reason listed for a little more.
Was asked about alternator and throttle body so Im posting pictures of them also.
Included pictures of bracket to make the larger alternator work
Was asked about alternator and throttle body so Im posting pictures of them also.
Included pictures of bracket to make the larger alternator work
#14
Re: New Project coming sale
Forgot to take pictures of the fuel rail kit before i go to work.. but this is the pieces
http://www.ebay.com/itm/ACCEL-DFI-74730-TPI-Fuel-Rail-Fitting-Kit-/221466840869?pt=Motors_Car_Truck_Parts_Accessories&hash=item339073cf25&vxp=mtr
and pictures of the valve covers and the timing chain cover and the timing chain(brand new in the box) if anyone else is interested
http://www.ebay.com/itm/ACCEL-DFI-74730-TPI-Fuel-Rail-Fitting-Kit-/221466840869?pt=Motors_Car_Truck_Parts_Accessories&hash=item339073cf25&vxp=mtr
and pictures of the valve covers and the timing chain cover and the timing chain(brand new in the box) if anyone else is interested
#15
Re: New Project coming sale
Just adding cam spec card picture so people who are interested in the motor know what cam is in there... Remember this is a brand new motor never ran. If I was buying a motor i would have someone check over of course...but its not necessary since it has brand new build. Put some oil in turn it buy hand so every thing is lubed up but it in a car and run it...
#17
Re: New Project coming sale
Lots of questions. If no real interest comes thru by next week may start putting some things on Ebay... Not in a hurry to sell but bringing everything out in the open for pictures is crowding the garage. And honestly it looks like some things are selling for alot more on ebay. Being a camaro guy wanted to give you guys first crack and give back to fellow 3rd geners.
#18
Junior Member
iTrader: (2)
Join Date: May 2014
Location: SoCal
Posts: 17
Received 0 Likes
on
0 Posts
Car: 1988 Iroc Z
Engine: 5.7
Transmission: 700r4
Axle/Gears: 9 bolt 2.77
Re: New Project coming sale
I sent you a pm yesterday, no response but I figured you were swamped with messages. I didn't offer, I don't want to insult anyone by low balling. So if you read my message let me know a number. Thank you sir! I'll be waiting.
Last edited by Irocan88; 10-29-2014 at 09:19 AM.
#24
Junior Member
iTrader: (15)
Join Date: Jun 2010
Location: Shreveport, La
Posts: 44
Likes: 0
Received 5 Likes
on
4 Posts
Car: 1987 Iroc Z
Engine: 355 TPI Fully Built
Transmission: Borg Warner WC 5-Speed
Axle/Gears: Stock Posi Rearend
Re: New Project coming sale
If you are willing to ship the engine at my cost, I would be very interested. i have been looking for a 383 for my 87 Iroc for a while now.
Can I get all the engine specs and parts used?
Did you assemble it yourself?
thanks, Greg
318-402-1244
Can I get all the engine specs and parts used?
Did you assemble it yourself?
thanks, Greg
318-402-1244
#29
Member
iTrader: (3)
Join Date: Apr 2010
Location: New Jersey
Posts: 422
Likes: 0
Received 13 Likes
on
12 Posts
Car: 87 Monte Carlo SS
Engine: 89 350TPI Transplant
Transmission: 2004r
Axle/Gears: 3.73
Re: New Project coming sale
I will take the "factory fuel rail converted to take AN lines - 70" if you still have it. Shipping to Glassboro, New Jersey 08028. PM sent
Last edited by Fred SS; 10-30-2014 at 04:14 PM. Reason: add "PM sent"
#35
Re: New Project coming sale
Im at work but pretty sure they are hookers... they are jet coated from brand new and then never used
Brackets are all jetcoated 88-92... its everything needed for a serpentine system including the waterpump with pulley and crank underdrive pulley
Brackets are all jetcoated 88-92... its everything needed for a serpentine system including the waterpump with pulley and crank underdrive pulley
#36
Junior Member
Join Date: Feb 2014
Location: Georgetown ontario
Posts: 19
Likes: 0
Received 4 Likes
on
3 Posts
Car: 1988 formula 350
Engine: 5.7 tpi full bolt ons
Transmission: 700 r 4 sonic shift kit
Axle/Gears: 323
Re: New Project coming sale
Just wondering if you still have the engine for sale,shipping to l7g3g7.
#38
Junior Member
iTrader: (15)
Join Date: Jun 2010
Location: Shreveport, La
Posts: 44
Likes: 0
Received 5 Likes
on
4 Posts
Car: 1987 Iroc Z
Engine: 355 TPI Fully Built
Transmission: Borg Warner WC 5-Speed
Axle/Gears: Stock Posi Rearend
Re: New Project coming sale
still interested in the engie. let me know if you still have it.
thanks, greg
thanks, greg
#39
Re: New Project coming sale
Trying to get to a point and get the engine ready for shipping the first person to respond is still interested...
throttle body plate Im waiting to hear from someone who was interested in whole set up...Nuff im trying to get the most bang for my buck. Especially since the Accel/Lingenfelter throttle body was always the most expensive on the market
throttle body plate Im waiting to hear from someone who was interested in whole set up...Nuff im trying to get the most bang for my buck. Especially since the Accel/Lingenfelter throttle body was always the most expensive on the market
#42
Supreme Member
iTrader: (6)
Join Date: Dec 2008
Location: Norwalk, CA
Posts: 2,540
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91Z28
Engine: 5.7 ls1
Transmission: 4l60e
Axle/Gears: 3.42
Re: New Project coming sale
Put me next on the engine as well I was hoping to get the procharger as well but seems like it sold.
#43
Junior Member
Re: New Project coming sale
Wow, there sure are a lot of people stacking up behind me on that motor.
I tried to post earlier when I first messaged him that I was interested but apparently you can't post in classifieds for 15 days after registering.
I tried to post earlier when I first messaged him that I was interested but apparently you can't post in classifieds for 15 days after registering.
#46
Re: New Project coming sale
sorry guys hadnt replied had school yesterday....yes the motor is pending a sale....
I'm a little surprised people arent buying the Super ram and the headers...especially since they are already jet coated and brand new.
or some of you other guys with the older belt set up dont want to convert over to a serpentine...
I'm a little surprised people arent buying the Super ram and the headers...especially since they are already jet coated and brand new.
or some of you other guys with the older belt set up dont want to convert over to a serpentine...
#50
Junior Member
iTrader: (5)
Join Date: Oct 2013
Location: Wayne Mi
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS
Engine: 383 stroker
Transmission: t56
Re: New Project coming sale
I kinda figured that. But if that falls through I will buy them heads. I do want the alt tho. Give me total price to ship to 48184 and your paypal.