Cleaning out the garage :parts added!EVERYTHING for $100
12-03-2013, 12:18 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2003
Location: nj
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Engine: IVTEC 2.4L aka SBC
Transmission: auto
Axle/Gears: 3.42
Cleaning out the garage :parts added!EVERYTHING for $100
I have a few parts I'm looking to get rid of. All prices are without shipping, and I am not willing to ship the wheels, or the hatch. Im located in central New Jersey.
UMI black LCA Relocation brackets - installed but never used comes with spacers and some of the old hardware. $75 NOW $65
Used Holley 750 with vacuum secondaries manual choke WILL NEED REBUILD - $100 NOW $80
Used Hurst Qaurter Stick Shifter - SOLD
Moroso U-Joint Girdle part number MOR-85800 opened but not used $20
Moroso 2 groove 50% underdrive pulley for chevy V6 Part number 64110 never installed. I have the washer with the pulley but I lost the bolt - $35 NOW $25
Summit Racing Tach all I have is the Tach, no box or instructions included. Has built in shift light $30 NOW $25
Competition Engineering 3 way adjustable rear shocks compressed 14 in extended 23 inches. These shocks were too long for my car, and WILL NOT WORK on a third gen. minor surface rust - $40 for both NOW $35 for both
Hatch I think it came off a 90 Camaro. $40 SOLD
4 Wheels from a 88 RS with Cooper Cobra Tires 215/65R15 with less than 3,000 miles on them. local pick up only $200 Now $180 SOLD
Cheapo thermostat housing + 8 spectre valve cover hold downs $5 for both
I have close up pictures of all the parts, PM me if you would like to see them.
I will sell all the remaining stuff - control arm brackets, shocks, tach, thermostat, carb, and u joint girdles ALL FOR $100
Price is Firm, Ill ship if you pay for it.
[IMG]
[/IMG]
UMI black LCA Relocation brackets - installed but never used comes with spacers and some of the old hardware. $75 NOW $65
Used Holley 750 with vacuum secondaries manual choke WILL NEED REBUILD - $100 NOW $80
Used Hurst Qaurter Stick Shifter - SOLD
Moroso U-Joint Girdle part number MOR-85800 opened but not used $20
Moroso 2 groove 50% underdrive pulley for chevy V6 Part number 64110 never installed. I have the washer with the pulley but I lost the bolt - $35 NOW $25
Summit Racing Tach all I have is the Tach, no box or instructions included. Has built in shift light $30 NOW $25
Competition Engineering 3 way adjustable rear shocks compressed 14 in extended 23 inches. These shocks were too long for my car, and WILL NOT WORK on a third gen. minor surface rust - $40 for both NOW $35 for both
Hatch I think it came off a 90 Camaro. $40 SOLD
4 Wheels from a 88 RS with Cooper Cobra Tires 215/65R15 with less than 3,000 miles on them. local pick up only $200 Now $180 SOLD
Cheapo thermostat housing + 8 spectre valve cover hold downs $5 for both
I have close up pictures of all the parts, PM me if you would like to see them.
I will sell all the remaining stuff - control arm brackets, shocks, tach, thermostat, carb, and u joint girdles ALL FOR $100
Price is Firm, Ill ship if you pay for it.
[IMG]
[/IMG]
Last edited by sittincamaro; 03-29-2014 at 08:17 AM. Reason: adding location
12-03-2013, 05:27 PM
#2
Junior Member
Thread Starter
Join Date: Nov 2003
Location: nj
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Engine: IVTEC 2.4L aka SBC
Transmission: auto
Axle/Gears: 3.42
Re: Cleaning out the garage : LCA relocation brackets, hurst shifter, holley 750….
Shifter is Sold!
12-05-2013, 09:32 AM
#4
Junior Member
Thread Starter
Join Date: Nov 2003
Location: nj
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Engine: IVTEC 2.4L aka SBC
Transmission: auto
Axle/Gears: 3.42
Re: Cleaning out the garage : LCA relocation brackets, hurst shifter, holley 750….
I also have a set of Moroso Trick springs that have had 2 coils cut off of them. They made my car (cast iron black sbc) sit too lower. Make an offer.
Also I have a 4 bolt main black that I think is .30 over. If you are seriously interested in the block I will take it to the machine shop to have to checked out and measured. I inherited the block from a friend that past away so I don't know what the specs are but he had it machined before he passed. Block should be ready to rock.
Also I have a 4 bolt main black that I think is .30 over. If you are seriously interested in the block I will take it to the machine shop to have to checked out and measured. I inherited the block from a friend that past away so I don't know what the specs are but he had it machined before he passed. Block should be ready to rock.
12-08-2013, 01:45 PM
#6
Junior Member
iTrader: (4)
Join Date: Jul 2013
Location: Buffalo, NY
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Iroc Z28
Engine: 305
Axle/Gears: 3.73
Re: Cleaning out the garage : LCA relocation brackets, hurst shifter, holley 750….
Got shifter Friday. Thanks. Bump for a good seller
12-08-2013, 02:51 PM
#7
Junior Member
iTrader: (4)
Join Date: Aug 2012
Location: Mesa, Az
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Iroc z
Engine: L98
Transmission: 700R4
Axle/Gears: 3:27
Re: Cleaning out the garage :parts added! Prices dropped!
PMs evidently not working, more info and pics on the tach. Is it 5 inch and is it a memory tach? Email is sarnold57@***.net.
Trending Topics
12-08-2013, 03:32 PM
#8
Junior Member
Thread Starter
Join Date: Nov 2003
Location: nj
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Engine: IVTEC 2.4L aka SBC
Transmission: auto
Axle/Gears: 3.42
12-08-2013, 03:33 PM
#9
Junior Member
Thread Starter
Join Date: Nov 2003
Location: nj
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Engine: IVTEC 2.4L aka SBC
Transmission: auto
Axle/Gears: 3.42
Re: Cleaning out the garage :parts added! Prices dropped!
PMs evidently not working, more info and pics on the tach. Is it 5 inch and is it a memory tach? Email is sarnold57@***.net.
12-10-2013, 11:48 PM
#11
Member
Join Date: Dec 2010
Location: Near Wichita Ks
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1997 K1500 SS/SB
Engine: LT1 with TPI on top
Transmission: 4L60E/np241,
Axle/Gears: 3.73
Re: Cleaning out the garage :parts added! Prices dropped!
how does that pully work?? would it be lik an add on? I need a set of pullies to run a second alternator on my truck for the winch system.
12-17-2013, 05:45 PM
#12
Junior Member
Thread Starter
Join Date: Nov 2003
Location: nj
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Engine: IVTEC 2.4L aka SBC
Transmission: auto
Axle/Gears: 3.42
Re: Cleaning out the garage :parts added! Prices dropped!
Its a 50% under drive pulley that would replace the stock crank pulley on a chevy v6. I don't think this is what you're looking for.
03-16-2014, 10:31 AM
#14
Junior Member
Thread Starter
Join Date: Nov 2003
Location: nj
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Engine: IVTEC 2.4L aka SBC
Transmission: auto
Axle/Gears: 3.42
Re: Cleaning out the garage :parts added! Prices dropped!
Im surprised no one wants the relocation brackets...
03-23-2014, 02:11 AM
#16
Want a title? Post!
Join Date: Mar 2013
Location: ashlandKY
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91z28/91firebird/02grandam
Engine: L98/3.1/3.4
Transmission: 700r4/5spd?¿?//?
Axle/Gears: 3.23?¿?I think/?
Re: Cleaning out the garage :parts added! Prices dropped!
Hi how much underdrive pulley shipped 41129 KY?
Thanx. Interested,pm me anyx after 5: Sunday evening.(work).
Thanx. Interested,pm me anyx after 5: Sunday evening.(work).
03-24-2014, 07:11 PM
#17
Supreme Member
iTrader: (1)
Join Date: Feb 2003
Location: check under the car
Posts: 1,143
Likes: 0
Received 4 Likes
on
3 Posts
Car: White 25th Anniversary RS
Engine: lt1
Transmission: t56
Axle/Gears: 4:10
Re: Cleaning out the garage :parts added! Prices dropped!
It's because founders sells CNC relo brackets for $45 (new last time I checked). It's hard to justify paying more for a part that is the same quality and does the same thing. I sold a pair a while ago and it went for 35 (back when they were 50 new), mind you this was a few years ago, but I have been looking for a pair and couldn't believe what they are asking for them now days. I wish I never sold mine now... Time flies I guess. Free bump 
Thread
Thread Starter
Forum
Replies
Last Post
1992rs/ss
Engine/Drivetrain/Suspension Parts for Sale
16
01-28-2016 09:58 PM
ProtoMaster22
Engine/Drivetrain/Suspension Parts for Sale
1
08-26-2015 07:50 AM