1st Gen ZO6 Corvette Brake Conversion - SOLD
06-21-2013, 03:09 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2012
Location: Pensacola
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Z/28 IROC-Z
Axle/Gears: 9 Bolt 3.27
1st Gen ZO6 Corvette Brake Conversion - SOLD
SOLD!
ZO6 Corvette brake calipers & anchor plates(new) / GM Brake pads(new) / GMPP Rotors 13"(new), Modified spindles / Modified Hubs (new) / Mounting brackets (new) /Timken bearings & all hardware (new). Trimmed backing plate to protect rear bearing. Must use 17"+ front rims. < For 82-92 Camaro/Firebird
I'll never get any 17" rims working on my bikes all the time.... So these could use a new home
Looking for $500.00
Prefer local pick-up,
ZO6 Corvette brake calipers & anchor plates(new) / GM Brake pads(new) / GMPP Rotors 13"(new), Modified spindles / Modified Hubs (new) / Mounting brackets (new) /Timken bearings & all hardware (new). Trimmed backing plate to protect rear bearing. Must use 17"+ front rims. < For 82-92 Camaro/Firebird
I'll never get any 17" rims working on my bikes all the time.... So these could use a new home
Looking for $500.00
Prefer local pick-up,
Last edited by ZF6camaroZZ4; 06-22-2013 at 04:12 PM.
06-21-2013, 03:11 PM
#2
Junior Member
Thread Starter
Join Date: Jan 2012
Location: Pensacola
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Z/28 IROC-Z
Axle/Gears: 9 Bolt 3.27
Re: 1st Gen ZO6 Corvette Brake Conversion
Some pics of the rotor sitting on a 16" IROC rim.... Could probably shave the fins off and make it work..? Who would want to do that?? Not me..
06-21-2013, 03:21 PM
#3
Senior Member
iTrader: (9)
Join Date: Jun 2002
Location: La Mirada, California
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: L98 350 TPI
Transmission: 700R4
Axle/Gears: ZT LSD with 3.42 - LS1 brakes
Re: 1st Gen ZO6 Corvette Brake Conversion
Would you consider seperating? I'd be interested in adapter plate for sure, possibly hubs and abutment brackets, shipped to 90638.
Thanks!
Thanks!
06-21-2013, 07:17 PM
#4
Junior Member
iTrader: (1)
Join Date: Jan 2008
Location: Overland Park, Kansas
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z28
Engine: 305 LG4
Transmission: 700R4
Axle/Gears: 3.23 10 bolt
Re: 1st Gen ZO6 Corvette Brake Conversion
I will take everything if you are willing to ship it. Shipping quote to 66213
06-21-2013, 07:31 PM
#5
Junior Member
Thread Starter
Join Date: Jan 2012
Location: Pensacola
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Z/28 IROC-Z
Axle/Gears: 9 Bolt 3.27
Re: 1st Gen ZO6 Corvette Brake Conversion
06-21-2013, 09:19 PM
#7
Junior Member
Thread Starter
Join Date: Jan 2012
Location: Pensacola
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Z/28 IROC-Z
Axle/Gears: 9 Bolt 3.27
Re: 1st Gen ZO6 Corvette Brake Conversion
Those first pics where when these parts were stored in the house. I had moved them to the garage(wife mentioned that's where car parts belong).
Anyway, the anchor plates have speckles on them now
Was going to hit them with wire brush, but figured leave them be. If that's a deal breaker, I understand.
Everything is boxed up, not sure if the right caliper went in with the right rotor.... but everything is in 3 boxes.
1 @ 33lbs
1 @ 30lbs
1 @ 48lbs
I shipped out an amplifier the other day that was 50lbs, was 65 dollars....
Anyway, the anchor plates have speckles on them now
Was going to hit them with wire brush, but figured leave them be. If that's a deal breaker, I understand.Everything is boxed up, not sure if the right caliper went in with the right rotor.... but everything is in 3 boxes.
1 @ 33lbs
1 @ 30lbs
1 @ 48lbs
I shipped out an amplifier the other day that was 50lbs, was 65 dollars....
Thread
Thread Starter
Forum
Replies
Last Post
IROCZDAVE (88-L98)
Interior Parts for Sale
4
10-06-2016 09:08 AM
[NY] Jamex STB SOLD!!
confucius101
Engine/Drivetrain/Suspension Parts for Sale
3
09-02-2015 03:34 PM
IROCZDAVE (88-L98)
Interior Parts for Sale
0
08-06-2015 03:51 PM