[TX] 22 lb Bosch Injectors
#1
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2009
Posts: 23
Likes: 0
From: Dallas, TX
Car: 88 Trans-am GTA
Engine: 400 Small block
Transmission: T-5
Axle/Gears: 3.42-3.73
22 lb Bosch Injectors
I have a set of 22lbs Bosch injector that were flow match. These injectors are in perfect condition when I pulled them out and won the last 6 National Championships on them. Had to go to bigger injector because these were going static over 6200 rpm. I also ohmed them, all ohmed at 15,4 on a fluke meter. $60.00 shipped. PM me if you are interested. I thought these were Multitec but some told me they were Bosch Part # 5235302 sorry for the confusion.
Thanks,
Mark
Thanks,
Mark
Last edited by MKM; 03-12-2013 at 08:12 PM. Reason: Forgot Location
#3
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2009
Posts: 23
Likes: 0
From: Dallas, TX
Car: 88 Trans-am GTA
Engine: 400 Small block
Transmission: T-5
Axle/Gears: 3.42-3.73
Re: 22 lb Multitec Injectors
Lots of looking but no takers yet. I was going to post some pic's up this weekend but it has been crazy around here.
#4
Joined: Dec 2004
Posts: 15,656
Likes: 720
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: 22 lb Multitec Injectors
I don't think you have any takers because the Bosch 2 injectors are fuel cooled and with age the coils short out .
#5
Supreme Member
iTrader: (29)
Joined: Sep 1999
Posts: 1,410
Likes: 2
From: Location, Location!
Car: 92 T/A 'vert
Engine: Mild .040 over L98 4 bolt mains
Transmission: Mostly stock 700R4, 2600 Vigilante
Axle/Gears: LS1 3.42
Re: 22 lb Multitec Injectors
Agreed. These are so poor functionally, their only purpose would be for a "correct" resto. Many injector places won't even bother servicing them.
#6
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2009
Posts: 23
Likes: 0
From: Dallas, TX
Car: 88 Trans-am GTA
Engine: 400 Small block
Transmission: T-5
Axle/Gears: 3.42-3.73
Re: 22 lb Multitec Injectors
I would agree with you if I didn’t know how these injectors were used. I have never run anything but unleaded race gas which has no alcohol, the alcohol is what eats the injectors also this car is a trailer queen in all the years of racing I may have put 3000-5000 miles on this car. Also if they were shorted they wouldn’t have ohmed correctly
#7
Senior Member
iTrader: (6)
Joined: Mar 2002
Posts: 587
Likes: 1
From: middle TENNESSEE
Car: 1989 Iroc rebuild
Engine: 355 carb'd
Transmission: 5spd
Axle/Gears: 3:08 pos for a while
Re: 22 lb Multitec Injectors
low posts,and no trader feedback doesn't help
I would agree with you if I didn’t know how these injectors were used. I have never run anything but unleaded race gas which has no alcohol, the alcohol is what eats the injectors also this car is a trailer queen in all the years of racing I may have put 3000-5000 miles on this car. Also if they were shorted they wouldn’t have ohmed correctly
Trending Topics
#8
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2009
Posts: 23
Likes: 0
From: Dallas, TX
Car: 88 Trans-am GTA
Engine: 400 Small block
Transmission: T-5
Axle/Gears: 3.42-3.73
Re: 22 lb Multitec Injectors
Here is a link that will take you to some Pic's.
http://dallas.craigslist.org/sdf/pts/3663934037.html
http://dallas.craigslist.org/sdf/pts/3663934037.html
Thread
Thread Starter
Forum
Replies
Last Post