[AL] SOLD 10-bolt 7.5 built rear excellent shape
#1
SOLD 10-bolt 7.5 built rear excellent shape
SOLD SOLD SOLD
$750 obo - Huntsville, Al.. (100 miles from Nashville, 100 Miles from Birmingham and 170 miles from Atlanta)
GM 7.5 inch 10-bolt housing
Moser C-Clip Eliminators
Moser custom alloy axles
LPW Ultimate 7.5 rear end cover/stablizer
Strange Engineering 3.73 Pro Gears
Auburn Pro Limited Slip Differential
Drum Brakes
Relocation bracket for Coil-over
Super clean...
Setup on my 1989 Trans Am. Good for 500hp+. Refreshed at local shop with new crusher sleeve and alignment with only 3 passes and 200 street miles. All internal components less than 30 passes and 500 street miles. Here are pics with it on the car and off. Will hook up directly to any Camaro or Trans-AM/Firebird and serve you well at half the price to build your own. Ready to pickup today. I am building a much stronger motor and installing a 9"inch.
FREE - With this purchase I will give you another rear axel that has an Open carrier with 2.42 gears that fits the 3rd gen as well.. Good highway rear..works just fine but a little dirty. Need to clean the garage out for other projects
Thanks... twofivesix sevenone4 sixeightonenine
$750 obo - Huntsville, Al.. (100 miles from Nashville, 100 Miles from Birmingham and 170 miles from Atlanta)
GM 7.5 inch 10-bolt housing
Moser C-Clip Eliminators
Moser custom alloy axles
LPW Ultimate 7.5 rear end cover/stablizer
Strange Engineering 3.73 Pro Gears
Auburn Pro Limited Slip Differential
Drum Brakes
Relocation bracket for Coil-over
Super clean...
Setup on my 1989 Trans Am. Good for 500hp+. Refreshed at local shop with new crusher sleeve and alignment with only 3 passes and 200 street miles. All internal components less than 30 passes and 500 street miles. Here are pics with it on the car and off. Will hook up directly to any Camaro or Trans-AM/Firebird and serve you well at half the price to build your own. Ready to pickup today. I am building a much stronger motor and installing a 9"inch.
FREE - With this purchase I will give you another rear axel that has an Open carrier with 2.42 gears that fits the 3rd gen as well.. Good highway rear..works just fine but a little dirty. Need to clean the garage out for other projects
Thanks... twofivesix sevenone4 sixeightonenine
Last edited by REBSTA; 08-02-2013 at 07:01 AM.
#7
Re: 10-bolt 7.5 built rear excellent shape
Fellow member has said he wants it and is sending a deposit to pick up this weekend. Shipping? Might cost a fair amount and right now I'm about ready to sue UPS for destroying my mint door panels and a like new console I shipped. Refunded the member that originally bought them, but UPS has refused to pay me the insurance I bought from them. It's been almost 2 months and nothing...so shipping...not sure I know who to trust even if it was economic enough to all parties. If the deal falls through, I'd be willing to maybe work something out at a meeting point, but I'd need money up front and some for gas and within 150 miles of home.
Trending Topics
#8
Senior Member
iTrader: (2)
Joined: Apr 2012
Posts: 604
Likes: 1
From: Norwalk, Ohio
Car: 1989 Firebird Formula
Engine: 385
Transmission: Full Manual TH350
Axle/Gears: Moser 9" 3.70
Re: 10-bolt 7.5 built rear excellent shape
If you ship it freight, my workplace will have it checked out upon arrival to make sure something like that doesn't happen. I understand your concern though. I would of course be willing to pay the shipping on it, because like you said, its about half the price of building a well built 7.5. Driving is just not feasible for me on this. That's a longggg way from Ohio, and it would be cheaper to ship it than the gas going down there and back.
If the deal with the other member on here falls through, let me know. I'll do my best to work something out with you. I need a rear end to support a 383, and I don't think my stock one will last too long at those power levels. Thank you for your time.
If the deal with the other member on here falls through, let me know. I'll do my best to work something out with you. I need a rear end to support a 383, and I don't think my stock one will last too long at those power levels. Thank you for your time.
#9
Junior Member
Joined: May 2011
Posts: 6
Likes: 2
From: Virginia
Car: 1985 Pontiac firebird as a play toy
Engine: 355 Chevy
Transmission: 5speed trans will be a turbo 350
Axle/Gears: 373 right now
Re: 10-bolt 7.5 built rear excellent shape
Hi do you still have the rear I can come and pick up the rear as I also live in Virginia
#10
Re: 10-bolt 7.5 built rear excellent shape
It's still available. Some time ago, this "guy" was coming to get it, one dealy and promise after another..no show..so i just quite trying to sell it. thought I might end up using it later on. It's available, but I live in North Alabama, not Virginia.
Thread
Thread Starter
Forum
Replies
Last Post
IROCZDAVE (88-L98)
Interior Parts for Sale
4
10-06-2016 09:08 AM
[NY] Jamex STB SOLD!!
confucius101
Engine/Drivetrain/Suspension Parts for Sale
3
09-02-2015 03:34 PM
IROCZDAVE (88-L98)
Interior Parts for Sale
0
08-06-2015 03:51 PM