[NE] 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
#1
Want a title? Post!
Thread Starter
Join Date: Feb 2012
Location: Omaha, NE
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro IROC-Z
Engine: 5.3 LS engine with magnacharger
Transmission: 6 speed
Axle/Gears: 3.73 Moser 12 bolt
6.4 liter 391 cubic inch Chevy small block with TPiS intake system
4 bolt main, marine block, zero decked. 4.03 bore, 3.835 stroke (391 cubic inch). Coated JE pistons, Crower 4340 rods, steel 3.835 stroke crank. Internally balanced. Fluid damper, AFR 200cc ported CNC competition heads. 2.05/1.60 stainless valves. Crower mechanical roller cam. Crane 1.6 roller rockers. 11.2 to 1 compression - runs on rump gas or e85. TPiS ported billet 1050 cfm throttle body. TPiS ported mini-ram II intake system. FAST engine management system with wideband O2 sensor and nitrous control. 7 qt oil system, MSD ignition. 1 3/4" Dyno Don coated headers. Car made 604 rwhp and 644 ft lbs torque on 150 shot nitrous and ran 11.59 at 122.9 mph at D.A. of 5800 elevation feet.
Also have all the a/c, p/s, alternator, and brackets to fit a third gen Camaro.
The bad - spun main bearning. A little machine shop work and you'll be good as new. You'll save thousands trying to put a motor like this together. I'm going to put in a LS engine and go another route instead of fixing this one up. My loss could be your gain. $2500.
Also have all the a/c, p/s, alternator, and brackets to fit a third gen Camaro.
The bad - spun main bearning. A little machine shop work and you'll be good as new. You'll save thousands trying to put a motor like this together. I'm going to put in a LS engine and go another route instead of fixing this one up. My loss could be your gain. $2500.
Last edited by 180pruf; 11-10-2012 at 07:38 PM. Reason: SOLD
#2
Supreme Member
iTrader: (29)
Join Date: Sep 1999
Location: Location, Location!
Posts: 1,410
Likes: 0
Received 2 Likes
on
2 Posts
Car: 92 T/A 'vert
Engine: Mild .040 over L98 4 bolt mains
Transmission: Mostly stock 700R4, 2600 Vigilante
Axle/Gears: LS1 3.42
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
I'm guessin' you're in Denver or somewhere like that?
Wait. 5800' in Nebraska?!
Wait. 5800' in Nebraska?!
#3
Want a title? Post!
Thread Starter
Join Date: Feb 2012
Location: Omaha, NE
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro IROC-Z
Engine: 5.3 LS engine with magnacharger
Transmission: 6 speed
Axle/Gears: 3.73 Moser 12 bolt
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
Nebraska
#4
Supreme Member
iTrader: (33)
Join Date: Jul 2000
Location: Boosted Land
Posts: 5,945
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Z28
Engine: Boosted LSX
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
Good deal for someone !! If all it needs is a re-rings and polish the crank and new bearings.
#6
Want a title? Post!
Thread Starter
Join Date: Feb 2012
Location: Omaha, NE
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro IROC-Z
Engine: 5.3 LS engine with magnacharger
Transmission: 6 speed
Axle/Gears: 3.73 Moser 12 bolt
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
Might do later, but right now would like to keep it as a package deal. You can PM me an offer for the mini-ram if you like, but please keep in mind I'd like to sell the entire package.
#7
Supreme Member
iTrader: (29)
Join Date: Sep 1999
Location: Location, Location!
Posts: 1,410
Likes: 0
Received 2 Likes
on
2 Posts
Car: 92 T/A 'vert
Engine: Mild .040 over L98 4 bolt mains
Transmission: Mostly stock 700R4, 2600 Vigilante
Axle/Gears: LS1 3.42
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
https://www.thirdgen.org/forums/engi...am-intake.html
Trending Topics
#8
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
You want a miniram? Cheap? Seek and ye shall find.
https://www.thirdgen.org/forums/engi...am-intake.html
https://www.thirdgen.org/forums/engi...am-intake.html
#9
Want a title? Post!
Thread Starter
Join Date: Feb 2012
Location: Omaha, NE
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro IROC-Z
Engine: 5.3 LS engine with magnacharger
Transmission: 6 speed
Axle/Gears: 3.73 Moser 12 bolt
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
When you say "he is full of ....." I hope you are not referring to me. I don't know anything about the other member, but I haven't received any real offers yet from anyone.
#10
Member
iTrader: (10)
Join Date: Apr 2006
Location: Joliet IL
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Camaro Convert,89 Camaro hardtop
Engine: 305 and a 357
Transmission: 700R4,T5
Axle/Gears: 4.10's and 3.43's
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
If the other guy wants the miniram I may be intersted in the long block pm me your price
#11
Want a title? Post!
Thread Starter
Join Date: Feb 2012
Location: Omaha, NE
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro IROC-Z
Engine: 5.3 LS engine with magnacharger
Transmission: 6 speed
Axle/Gears: 3.73 Moser 12 bolt
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
pm sent
#12
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
And I would possibly be interested in the FAST system if its complete with harness and the price is right
#13
Want a title? Post!
Thread Starter
Join Date: Feb 2012
Location: Omaha, NE
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro IROC-Z
Engine: 5.3 LS engine with magnacharger
Transmission: 6 speed
Axle/Gears: 3.73 Moser 12 bolt
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
Here's a couple photos of a few parts. I haven't had a chance to clean up the motor parts yet since I just disassembled it the other day.
#14
Want a title? Post!
Thread Starter
Join Date: Feb 2012
Location: Omaha, NE
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro IROC-Z
Engine: 5.3 LS engine with magnacharger
Transmission: 6 speed
Axle/Gears: 3.73 Moser 12 bolt
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
Sounds like I may be separating the motor up into pieces. If you have an interest in a particular part, please let me know.
As info - the motor never lost oil pressure for those that were interested in the block.
As info - the motor never lost oil pressure for those that were interested in the block.
#15
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
Hi friend. The heads sound nice so i wanted to clarify what they were and their condition. Afr 200 sounds like maybe the prior generation 5 to 7 years ago? So they would not have the newer anti valve floating springs for above 6200 rpms on a roller cam? And how fresh can you estimate their valve seats? If you had the part number it may help place a value on them. I have 2 new sets of roller rockers so i wouldnt need those but i would appreciate a ballpark value that you place on them. I dont know how to pm so ill leave my email for you to give me your price. Thanks in advance. Pittsburgh Chris
Price on the headers too please
Lonewolf5933@yahoo.com
Price on the headers too please
Lonewolf5933@yahoo.com
Last edited by toomanytransams; 10-27-2012 at 06:54 PM. Reason: forgot email
#16
Want a title? Post!
Thread Starter
Join Date: Feb 2012
Location: Omaha, NE
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro IROC-Z
Engine: 5.3 LS engine with magnacharger
Transmission: 6 speed
Axle/Gears: 3.73 Moser 12 bolt
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
E-mail sent
#18
Want a title? Post!
Thread Starter
Join Date: Feb 2012
Location: Omaha, NE
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro IROC-Z
Engine: 5.3 LS engine with magnacharger
Transmission: 6 speed
Axle/Gears: 3.73 Moser 12 bolt
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
Sorry - I don't have that information handly. The short block is still assembled, but I can't see any stampings or marks on the rods that would help me answer your question.
#19
Member
iTrader: (10)
Join Date: Apr 2006
Location: Joliet IL
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Camaro Convert,89 Camaro hardtop
Engine: 305 and a 357
Transmission: 700R4,T5
Axle/Gears: 4.10's and 3.43's
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
E-mail sent
#20
Member
iTrader: (1)
Join Date: Jan 2009
Location: New York
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 GTA
Engine: 350
Transmission: 700R4
Axle/Gears: 3.23
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
If you have a part number from the piston then I can figure out the rod lenght.
#21
Want a title? Post!
Thread Starter
Join Date: Feb 2012
Location: Omaha, NE
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro IROC-Z
Engine: 5.3 LS engine with magnacharger
Transmission: 6 speed
Axle/Gears: 3.73 Moser 12 bolt
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
Headers have been sold
#22
Want a title? Post!
Thread Starter
Join Date: Feb 2012
Location: Omaha, NE
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro IROC-Z
Engine: 5.3 LS engine with magnacharger
Transmission: 6 speed
Axle/Gears: 3.73 Moser 12 bolt
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
TPiS mini-ram has been sold. Ported throttle body is still available as is the longblock.
#23
Want a title? Post!
Thread Starter
Join Date: Feb 2012
Location: Omaha, NE
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro IROC-Z
Engine: 5.3 LS engine with magnacharger
Transmission: 6 speed
Axle/Gears: 3.73 Moser 12 bolt
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
PMs sent on longblock information
#25
Want a title? Post!
Thread Starter
Join Date: Feb 2012
Location: Omaha, NE
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro IROC-Z
Engine: 5.3 LS engine with magnacharger
Transmission: 6 speed
Axle/Gears: 3.73 Moser 12 bolt
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
Throttle body sold.
Longblock still available.
Longblock still available.
#26
Want a title? Post!
Thread Starter
Join Date: Feb 2012
Location: Omaha, NE
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro IROC-Z
Engine: 5.3 LS engine with magnacharger
Transmission: 6 speed
Axle/Gears: 3.73 Moser 12 bolt
Re: 6.4 liter 391 cubic inch Chevy small block with TPiS intake system
All available parts have been sold. Thanks
Thread
Thread Starter
Forum
Replies
Last Post
1992rs/ss
NW Indiana and South Chicago Suburb
12
05-19-2020 07:02 PM
9192camaro
Engine/Drivetrain/Suspension Parts for Sale
16
02-03-2019 12:21 AM
theshackle
Tech / General Engine
4
03-05-2017 06:37 PM
Fast355
DFI and ECM
14
12-02-2016 06:33 PM