[NV] SLP 1 3/4" headers
06-25-2012 | 02:43 PM
#1
Thread Starter
Senior Member
iTrader: (3)
Joined: Oct 1999
Posts: 535
Likes: 0
From: Reno, Nevada
Car: 1991 Formula L98
Engine: 350
Transmission: T-56
Axle/Gears: 3.73:1
SLP 1 3/4" headers
Y-pipe is sold.
These have barely any miles on them. They are the non-AIR style, stainless steel, and yes they're the 1.75" primary model. These have not been clearanced for the steering shaft, or modified in any way.
Can accept credit cards through Google Checkout, or money orders.
$175 shipped
These have barely any miles on them. They are the non-AIR style, stainless steel, and yes they're the 1.75" primary model. These have not been clearanced for the steering shaft, or modified in any way.
Can accept credit cards through Google Checkout, or money orders.
$175 shipped
Last edited by Jeremy_84_F41; 08-29-2012 at 06:55 PM.
06-26-2012 | 05:09 PM
#4
Junior Member
Joined: Jun 2012
Posts: 1
Likes: 0
From: ROCHESTER, NEW YORK
Car: 1991 PONTIAC FIREBIRD FORMULA
Engine: 355
Transmission: 700R4 STREET STRIP
Axle/Gears: 373 MOTIVE GEAR
Re: SLP 1 3/4" headers/dual 2.5" pipes/bolt in test pipes
Complete setup from my 1991 Formula 350. Swapping in an LS1.
These have barely any miles on them. They are the non-AIR style, stainless steel, and yes they're the 1.75" primary model. Also, I didn't like how SLP's y-pipe necked down to 2.25" so these have custom 2.5" pipes. Includes the proper length allen head-bolts and reusable aluminum collector gaskets. Using red RTV and aluminum gaskets, these never leaked. You will want to purchase new header gaskets of your choice.
These have not been clearanced for the steering shaft, or modified in any way. There is a second O2 sensor bung on the passenger side pipe, intended for a wideband sensor, or could be used in an OBD2 setup.
From SLP, you would have only been given the pipes going from the headers to the front of the cats. As you can see in the pic, this is a dual cat setup with dual bolt in test pipes. The Y-pipe is a Flowmaster 2.5 to 3.5". The intermediate pipe is not included so the exhaust will be cut after the merge.
PM with questions. Can ship, buyer pays shipping. Can accept credit cards through Google Checkout, or money orders.
$600
These have barely any miles on them. They are the non-AIR style, stainless steel, and yes they're the 1.75" primary model. Also, I didn't like how SLP's y-pipe necked down to 2.25" so these have custom 2.5" pipes. Includes the proper length allen head-bolts and reusable aluminum collector gaskets. Using red RTV and aluminum gaskets, these never leaked. You will want to purchase new header gaskets of your choice.
These have not been clearanced for the steering shaft, or modified in any way. There is a second O2 sensor bung on the passenger side pipe, intended for a wideband sensor, or could be used in an OBD2 setup.
From SLP, you would have only been given the pipes going from the headers to the front of the cats. As you can see in the pic, this is a dual cat setup with dual bolt in test pipes. The Y-pipe is a Flowmaster 2.5 to 3.5". The intermediate pipe is not included so the exhaust will be cut after the merge.
PM with questions. Can ship, buyer pays shipping. Can accept credit cards through Google Checkout, or money orders.
$600
Last edited by Martin Haberer; 06-26-2012 at 05:10 PM. Reason: incomplete sentence
06-26-2012 | 05:37 PM
#5
Thread Starter
Senior Member
iTrader: (3)
Joined: Oct 1999
Posts: 535
Likes: 0
From: Reno, Nevada
Car: 1991 Formula L98
Engine: 350
Transmission: T-56
Axle/Gears: 3.73:1
Re: SLP 1 3/4" headers/dual 2.5" pipes/bolt in test pipes
I will separate if I have buyers for both parts. We can work that out.
They performed great. Why I'm selling them has nothing to do with the headers themselves.
They performed great. Why I'm selling them has nothing to do with the headers themselves.
Trending Topics
07-13-2012 | 07:30 PM
#10
Junior Member
Joined: Oct 2011
Posts: 4
Likes: 0
From: brighton tn
Car: gunmetal 88 gta 98 yamaha vmax
Engine: l98
Transmission: 700r4
Axle/Gears: bw 9 bolt 327
Re: SLP 1 3/4" headers/dual 2.5" pipes/bolt in test pipes
depends on the price for just headers shipped to 38011
08-14-2012 | 06:12 PM
#11
Thread Starter
Senior Member
iTrader: (3)
Joined: Oct 1999
Posts: 535
Likes: 0
From: Reno, Nevada
Car: 1991 Formula L98
Engine: 350
Transmission: T-56
Axle/Gears: 3.73:1
Re: SLP 1 3/4" headers/dual 2.5" pipes/bolt in test pipes
The SLP headers are still for sale. Y-pipe is sold. Please PM with offers. Thank you.
09-14-2012 | 12:54 PM
#12
Joined: Jul 1999
Posts: 11,812
Likes: 95
From: SALEM, NH
Car: '88 Formula, '95 Formula
Engine: LC9 , LT1
Transmission: TKX , 4L60E
Axle/Gears: 3.50 9" , 3.23 10bolt
09-15-2012 | 07:49 AM
#13
Joined: Jul 1999
Posts: 11,812
Likes: 95
From: SALEM, NH
Car: '88 Formula, '95 Formula
Engine: LC9 , LT1
Transmission: TKX , 4L60E
Axle/Gears: 3.50 9" , 3.23 10bolt
Re: SLP 1 3/4" headers
Payment sent for headers.
Do you happen to still have the header bolts? I know SLP used like 3 different length 3/8" bolts rather than normal header bolts.
-- Joe
Do you happen to still have the header bolts? I know SLP used like 3 different length 3/8" bolts rather than normal header bolts.
-- Joe
09-15-2012 | 04:54 PM
#14
Thread Starter
Senior Member
iTrader: (3)
Joined: Oct 1999
Posts: 535
Likes: 0
From: Reno, Nevada
Car: 1991 Formula L98
Engine: 350
Transmission: T-56
Axle/Gears: 3.73:1
Re: SLP 1 3/4" headers
I do and they will be sent with the headers. They are all odd lengths and are allen head with lock washers.
Thread
Thread Starter
Forum
Replies
Last Post
redformula88
Engine/Drivetrain/Suspension Parts for Sale
2
10-14-2015 07:08 PM
TX-SleeperC5
Engine/Drivetrain/Suspension Parts for Sale
1
09-24-2015 04:13 PM
